Gre AR2084 Bedienungsanleitung

Gre Nicht kategorisiert AR2084

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gre AR2084 (56 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 153 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/56

INSTRUCTION MANUAL

Table of Contents

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Water Chemistry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Salt Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Stabilizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Trouble Shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Winterizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

www.smartpool.com

WARNING: Do not use if unit is damaged in any way.

WARNING: Unit must be completely submerged in water or warranty is void.

WARNING: Make sure ChlorEase is unplugged from its power supply before opening the unit or

performing any other maintenance.

WARNING: To protect risk of electrical shock, do not put the transformer in water or other liquid.

WARNING: To avoid damage to the transformer and cord, never carry the transformer by the cord or

pull on the cord to disconnect from an outlet. Instead, disconnect by pulling the plug itself

from the outlet. Do not pull cord around sharp corners or edges.

WARNING: Do not operate with a damaged cord or transformer.

CAUTION: Disconnect transformer from outlet when not in use.

CAUTION: If ChlorEase is not working as it should or has been dropped or damaged in any way,

contact SmartPool customer service before using at 1-732-730-9880.

WARNING: DO NOT USE EXTENSION CORDS, DEATH OR INJURY CAN RESULT.

WARNING: The sole purpose of this product is for use as a salt water chlorinator as described in this

manual; any modification or other use will void the warranty.

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS

WARNING: Plug only into 110 V receptacles protected by a ground fault circuit interrupter.

WARNING: Do not connect unit to AC power until installation is complete

WARNING: Do not allow children to use, touch, or play near or around the units’ power pack.

WARNING: If ambient air temperature exceeds 115˚ F., protect the transformer from direct

sunlight with a well ventilated cover.

Minimum Water

Level

SAVE THESE INSTRUCTIONS

WARNING: To reduce the risk of injury, do not permit children to use this product unless they are

closely supervised at all times

Introduction

ChlorEase is an automated chlorine generation system that has been specifically designed to operate in the above ground or storable pool

environment. The system requires a low concentration of salt (sodium chloride) in the pool water. The salt levels are generally below the

taste level of most people, but have the effect of softening the water so it feels silkier and leaves hair and skin feeling much smoother than

with other chlorine chemical products.

The ChlorEase unit sanitizes your water by converting the sodium chloride (salt) in your pool to chlorine ions by electrolysis. The chlorine

ions generated form hypochlorous acid, killing bacteria and algae in the pool that are then removed mechanically by the pool filter. The

chlorine then reconstitutes itself as sodium chloride and begins the process from the beginning, in a virtually unending cycle, resulting in

rarely having to add sanitizer to your pool again. The only way that salt is lost from the pool is through backwashing, splash out or

drainage. Thus, salt replenishment is needed only periodically.

ChlorEase has been designed to introduce sanitizer 24 hours a day 7 days a week to keep your pool sparkling clear. It has been designed to

work on a wide variety of pools with minimal installation time.

Water Chemistry

The ChlorEase system will automate the introduction of sanitizer into your pool, but it is very important that you check and regularly

maintain the chemical make up of your pool water. Table 1 shows the recommended levels to be maintained in your pool.

It is essential to maintain these levels to maximize the life of your product. Test your water weekly or bring a sample to your local pool

store so they may assist you in maintaining proper pool chemistry.

Be sure to inform the pool professional testing your water that you are using a ChlorEase salt water system. Cyanuric acid or conditioner

takes a few days to totally dissolve and level off. Please monitor it closely for the first few days of operation (See Table 4). Cyanuric acid

stabilizes the presence of chlorine in your pool water and is essential for proper disinfection.

Installation

Note: For additional help with installation, you may wish to download our installation video on our website by typing the following link

in your browser window: http://www.smartpool.com/website/recwatertec/chlorease/video/chlorease.wmv

1) First insure that chemical levels of the pool are correct. If the

composition is not correct, the unit will not be able to maintain

sanitizer conditions.

2) Locate an area of the pool that will allow for convenient access

to a reliable steady supply of electricity with a GIFC socket.

Note:You may plug your ChlorEase unit into an appropriate

timer that is able to handle a 6V/6A output. The timer must be

plugged into a 120V GFCI receptacle. DO NOT PLUG IN YET!

3) Install ChlorEase in reasonably close

proximity to filter return fitting to

maximize circulation of the chlorine

being produced.

4) Remove screws and caps

securing the top ledge of the

pool in the desired area.

6) Turn screws on back of mounting

bracket in to secure the unit

against the top of the pool wall using

Allen wrench provided. It is recom-

mended that your aboveground pool

be grounded for safety. Consult your

local electrician for details.

7) Replace the top rail and all hardware.

8) Plug ChlorEase in to 120vac GFCI socket.

9) Place the transformer in a protected area at least 3 feet from the

pool. Bubbles should rise from submerged cell. Initially a soft

milky cloud may appear around the ChlorEase unit. This will

stop after a few days of use. This is normal and a good indicator

that the unit is working properly.

WARNING: DO NOT OPERATE CHLORINATOR IF SALT LEVEL IS

BELOW 2,500 ppm. FAILURE TO MAINTAIN PROPER

SALT LEVELS IN POOL WATER MAY VOID WARRANTY.

5) Gently lift one end of the ledge and slide the

ChlorEase unit onto the pool wall. For best results position the

ChlorEase unit in the middle of the top ledge.

Minimum

Water

Level

Table 1

Optimum Water Chemistry

Salt 3400 to 4000 ppm

Free Chlorine 1.0 to 4.0 ppm

pH 7.2 to 7.6

Total Alkalinity 80 to 120 ppm

Calcium Hardness 150 to 300 ppm

Cyanuric Acid 80 ppm

Metals 0 ppm

ITEM RECOMMENDED LEVEL

(ppm= parts per million)

NOTE: It may be necessary to unplug your ChlorEase

Chlorine Generator if over- chlorination occurs. If this

should happen, unplug the transformer from the GFCI

receptacle and test the level of free chlorine in the water

daily until a desired range of 1.0 – 4.0 PPM of free avai-

lable chlorine is achieved (See Table 2). Once a desired

level of free chlorine is reached, plug the transformer

back into the GFCI receptacle. If there is not enough

chlorine in the water or you cannot keep a chlorine

reading in your pool (high chlorine demand), refer to

Table 2.1 to determine how much shock should be added

to your pool to increase the free available chlorine (FAC)

level in the water. Contact Smartpool at 1-732-730-9880

for additional help should this fail to correct the problem.

Produktspezifikationen

Marke:	Gre
Kategorie:	Nicht kategorisiert
Modell:	AR2084
Form:	Rechteckig
Gewicht:	4250 g
Produkttyp:	Pool chlorinator
Produktfarbe:	Black, Grey
Eingebautes Display:	Nein
Verpackungsbreite:	555 mm
Verpackungstiefe:	95 mm
Verpackungshöhe:	250 mm
Einfach zu bedienen:	Ja
Verpackungsart:	Box
Produkte pro Palette:	80 Stück(e)