Godox Smart 250SDi Bedienungsanleitung

Godox Flitser Smart 250SDi

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Godox Smart 250SDi (5 Seiten) in der Kategorie Flitser. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
S t u d i o S t r o b e
82.A000SDI0-00 VA
说 明 手 册
Instruction Manual
120SDi/160SDi/
250SDi/300SDi
Thank you for your purchase of Smart Studio Flash.The device is designed for
photographers seeking studio equipments in good quality at an affordable price.
With its well-chosen key components and parts, the product is of high quality,
stability and reliability for all portrait, fashion, wedding art, advertisement
photography and video shooting etc.
Foreword
Contents
02
Foreword
For Your Safety
Caution
Names of Parts
Body
Accessories
Operations
Flash Preparation
Power Connection
Flash Output Control
Test Button
Sync Triggering
Slave Trigger Model
Modeling Lamp
Tube Replacement
Buzz Function
Technical Data
Maintenance
02
03
03
05
05
05
06
06
06
06
06
06
07
07
07
07
08
08
To prevent damage to the product or injury to you or to others, read the
following safety precautions in their entirety before using this equipment.
Keep these safety instructions where users can read them for ready
reference.
To avoid overheating & damaging your flash unit, please wait for about three
minutes after 30 times continuous triggers at full power.
Do not disassemble or modify
There are high-voltage components inside the unit. Failure to observe this
precaution could result in electric shock or product malfunction. Should the
product break open as the result of a fall or other accident, send the defective
back to authorized service center for inspection and maintenance.
For Your Safety
Caution
0403
Keep dry
Do not handle with wet hands or immerse in or expose to water or rain. Failure
to observe this precaution could result in fire or electric shock.
Keep out of the reach of children
This device contains small parts that may pose a choking hazard. Consult a
physician immediately if a child swallows any part of this device.
Do not expose to high temperature
Do not leave the device in a closed vehicle under the sun or in other areas
subject to extremely high temperature. Failure to observe this precaution
could result in fire or damage to the housing or internal parts.
Do not keep long time in using the modeling lamp, otherwise the modeling lamp
will be deformed, and the flammable accessories such as softbox will get burnt.
The flash can be used at full power for five minutes continuous, and then it
should be cooled down one minute.
When using a snoot, do not keep long time the modeling lamp on or over
frequent flashlight (not over six times for one minute). Overheating will result in
damages for strobe housing and studio light.
Do not touch the lamp cap when the flash or modeling lamp is working, as it will
give out heat, leading to high surface temperature.
Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.
Do not flash directly towards naked eyes (especially those of babies), otherwise
it maylead to short time visual impairment.
When not in use, disconnect from the power supply.
High voltage inside the tube outlets, please do not touch it. Hands should be dry
with insulated gloves when load/unload the flash tube and modeling lamp.

Produktspezifikationen

Marke: Godox
Kategorie: Flitser
Modell: Smart 250SDi

Brauchst du Hilfe?

Wenn Sie Hilfe mit Godox Smart 250SDi benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Flitser Godox

Bedienungsanleitung Flitser

Neueste Bedienungsanleitung für -Kategorien-