Glide Gear TMP 100 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Glide Gear TMP 100 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
TMP 100
For more informaon please visit our website: www.glidegear.net
Requirements
In order to use the TMP 100, you will need the following items, which are not in-
cluded with the TMP 100:
A video recording device such as a DSLR or a Mirrorless camera, a tablet
or a smartphone. The TMP 100 does not come with a phone or a tablet
mount/adapter.
A device, typically, a tablet or a cellphone, displaying the script to be read
in front of the camera. The device will need to be equipped with a tele-
prompng applicaon or soware allowing mirroring of text.
A tripod capable of supporng the weight of the enre setup.
Compability
DSLR/Mirrorless Cameras: the distance between the mounng hole at the
boom of the camera and the front of the lens should not exceed or 7.9
20cm
Tablet/Cell phone: the maximum display the TMP 100 will accommodate
without part of the screen being cut o is or 26.5cm x 20cm10.5”x 8”
App Download
Download a free or a paid version of a tele-
prompter in the app store of your tablet or cell-
phone. The app must be able to mirror the script
in order to funcon properly with the TMP 100.
TMP 100
1 The TMP 100 can be set on a at surface or
mounted onto a tripod.
When using a tripod, remove the cheese-
plate from the tripod head and screw it onto
one of the mounng holes at the boom of
the TMP 100.
For more informaon please visit our website: www.glidegear.net
2
3
4
5
6
Fig. A
Fig C.
Using the thumb screws on both sides of the
mirror, place the frame at a 45 degree angle -
(Fig. A).
The TMP s back plate features a 1/4100’ -20
mounng screw inside a slot. (Fig. B).
Mount the camera on the 1/4 20 screw.-
Using the Velcro straps on the side of the
mirror, aach the TMP s hood around 100’
the frame and zip up the sides.
Place your camera lens inside the sock build
into the hood.
If you are using a cellphone, place the sock
around the phone so that you can sll see the
screen.
Loosen the 2 thumbscrews below the camera
plate to extend the tray forward ( Fig.C)
Assembly
TMP 100
7 Place your prompng device on the tray.
Fig. D
If needed, adjust the posion of the mirror in
the same way you did in Step 2
8 Secure the posion of your prompng device by
clamping it in between the 2 clamps already
mounted onto the tray. (Fig E).
Make sure to secure the tray by ghtening the
thumbscrews from Step 6.
9
10
For more informaon please visit our website: www.glidegear.net
Fig. F
Your setup should look like Fig. E.
Mounng Accessories
The TMP 100 includes 2 extra 1/4 20 mounng screws. -
Use the mounng screws to mount the accessories of your choice on each side od the frame holding the
mirror as pictured in Fig. F


Produktspezifikationen

Marke: Glide Gear
Kategorie: Nicht kategorisiert
Modell: TMP 100

Brauchst du Hilfe?

Wenn Sie Hilfe mit Glide Gear TMP 100 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Glide Gear

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-