Gira DALI 2030 00 Bedienungsanleitung

Gira Beleuchtung DALI 2030 00

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gira DALI 2030 00 (14 Seiten) in der Kategorie Beleuchtung. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/14

Wireless DALI control unit, 1-gang Mini

Wireless DALI control unit, 1-gang MiniWireless DALI control unit, 1-gang Mini

Order no.: 5422 00

Operating instructions

Operating instructionsOperating instructions

11 Safety instructions

Safety instructions

Safety instructionsSafety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Electrical devices may only be mounted and connected by electrically skilled persons.Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, fire or property damage possible. Please read and follow manual fully.

Serious injuries, fire or property damage possible. Please read and follow manual fully.Serious injuries, fire or property damage possible. Please read and follow manual fully.

Danger of electric shock. Always disconnect before carrying out work on the device or load. In

Danger of electric shock. Always disconnect before carrying out work on the device or load. InDanger of electric shock. Always disconnect before carrying out work on the device or load. In

so doing, take all the circuit breakers into account, which support dangerous voltages to the

so doing, take all the circuit breakers into account, which support dangerous voltages to theso doing, take all the circuit breakers into account, which support dangerous voltages to the

device and or load.

device and or load.device and or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.Danger of electric shock. Device is not suitable for disconnection from supply voltage.

These instructions are an integral part of the product, and must remain with the end customer.

These instructions are an integral part of the product, and must remain with the end customer.These instructions are an integral part of the product, and must remain with the end customer.

Further information about this device can be found in the operation manual on our web-

site.

22 Device components

Device components

Device componentsDevice components

Figure1: Front view

(1) Operating mode switch

(2) Button Prog

Prog

ProgProg

(3) Status LED

(4) Measuring points for voltage measurement, terminals rear-mounted

33 Intended use

Intended use

Intended useIntended use

– Switching and brightness setting of DALI luminaires

– Operation with suitable radio transmitters

– Mounting in appliance box according to DIN 49073 in combination with a suitable cover

– Installation in surface-mounted housing or panel-mounted housing (accessories) for sus-

pended ceilings

Product characteristics

Product characteristicsProduct characteristics

– Joint operation of all the connected DALI ballasts, broadcast.

1 / 14

32580922 10864978 22.08.2019

Wireless DALI control unit, 1-gang Mini

– Electronic short-circuit protection of the DALI supply with permanent switch-off after 8

seconds

– Electronic over-temperature protection of the DALI supply with self-retain

– DALI supply for a maximum of 12 subscribers

– Parallel switching of up to 6 DALI control units with the option of supplying up to 72 DALI

subscribers

– Switch-on brightness can be saved permanently

– Minimum brightness can be saved permanently

– Scene operation possible

– Status indication with LED

– Status feedback to radio transmitter

– DALI ballast is switchable with Prog

Prog

ProgProg button

Can be set with eNet server:

– Maximum brightness

– Dimming speed

– Switch-on delay / switch-off delay

– Dim up/dim down ramp

– Switch-off warning

– Operation locks

– Continuous on, Continuous off

– Hotel function

– Run-on time

– Light control

When operating with the eNet Server, operation and signalling could vary from what is de-

scribed here.

Supplementary functions with eNet Server:

– Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0

– Update of the device software

– Repeater function

– Reading of error memory

Product characteristics

Product characteristicsProduct characteristics

– Joint operation of all the connected DALI ballasts, broadcast.

– Electronic short-circuit protection of the DALI supply with permanent switch-off after 8

seconds

– Electronic over-temperature protection of the DALI supply with self-retain

– DALI supply for a maximum of 12 subscribers

– Parallel switching of up to 6 DALI control units with the option of supplying up to 72 DALI

subscribers

– Switch-on brightness can be saved permanently

– Minimum brightness can be saved permanently

– Scene operation possible

– Status indication with LED

– Status feedback to radio transmitter

– DALI ballast is switchable with Prog

Prog

ProgProg button

Can be set with eNet server:

– Maximum brightness

– Dimming speed

– Switch-on delay / switch-off delay

– Dim up/dim down ramp

2 / 14

32580922 10864978 22.08.2019

Wireless DALI control unit, 1-gang Mini

– Switch-off warning

– Operation locks

– Continuous on, Continuous off

– Hotel function

– Run-on time

– Light control

When operating with the eNet Server, operation and signalling could vary from what is de-

scribed here.

The parameter list is in the Internet in the documentation for this device.

Supplementary functions with eNet Server:

– Fully encrypted radio transmission (AES-CCM) from eNet Server software version 2.0

– Update of the device software

– Repeater function

– Reading of error memory

Behaviour after mains voltage failure and return

Behaviour after mains voltage failure and returnBehaviour after mains voltage failure and return

The response after mains voltage return can be configured with the eNet server. Default setting:

The light is switched off after mains voltage return. After a brief voltage failure or in the case of

operation on several conductors, it might take a few seconds until the light is switched off.

Within this time frame, a value stored in the DALI ballast – PowerON-Level – is retrieved.

The brightness of the lighting when DALI- telegrams are missing – PowerON-Level – and

in case of DALI system voltage failure – SystemFailure-Level – is stored in the DALI bal-

last and cannot be changed using the actuator.

44 Operation

Operation

OperationOperation

Operation with radio transmitter

Operation with radio transmitterOperation with radio transmitter

Operation is with radio transmitters, please observe the radio transmitter instructions.

Operation always applies to all the connected DALI ballasts, broadcast.

55 Information for electrically skilled persons

Information for electrically skilled persons

Information for electrically skilled personsInformation for electrically skilled persons

5.1

5.15.1 Fitting and electrical connection

Fitting and electrical connection

Fitting and electrical connectionFitting and electrical connection

DANGER!

Electrical shock when live parts are touched.

Electrical shock when live parts are touched.Electrical shock when live parts are touched.

Electrical shocks can be fatal.

Electrical shocks can be fatal.Electrical shocks can be fatal.

Before carrying out work on the device or load, disengage all the corresponding cir-

Before carrying out work on the device or load, disengage all the corresponding cir-Before carrying out work on the device or load, disengage all the corresponding cir-

cuit breakers. Cover up live parts in the working environment.