Gembird Action cam Full HD Bedienungsanleitung

Gembird Sportkamera Action cam Full HD

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gembird Action cam Full HD (39 Seiten) in der Kategorie Sportkamera. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/39
Wifi FHD Action Cam
ACAM-W-01”
User Manual - Benutzerhandbuch
Gebruiksaanwijzing – mode d’employ
Welcome
Thank you for choosing our ACAM-W-01, a Full HD action camera with WiFi feature.
This user manual provides detailed instructions regarding how to use this device and other detailed
information, including installation, technical specifications, etc.. Before use, please read this
manual carefully and be sure to understand it completely. Please keep this manual for future
reference.
Product Structure
1. “OK” key 7. Speaker
2. “POWER” key 8. Microphone
3. “MENU” (M) key 9. HDMI port
4. “<-” key 10. SD card slot
5. “+>” key 11. USB port
6. Wide-angle lens 12. Battery compartment
Key/button functions
1. “OK” key: confirmation
2. “POWER” key: On/Off.
3. “M” key: shortly pressed, menu function key; held, playback/return
4. “<-“ key: Down key/shooting.
5. “+>” key: UP key/ marking/WIFI
.
English
Installing the battery and memory card
1. Open the waterproof lid that covers the connectors, battery compartment and memory card
slot.
2. Insert the battery until the safety catch snaps into place.
3. Insert the memory card into the card slot until it is fixed firmly in the slot. Be sure to insert it
only in the correct direction, as indicated on the camera.
4. For removing the memory card, slightly press the card to release it. Only after it is released,
you may take it out.
5. If no card is inserted, the screen will display the informationNo card!” as shown in the below
picture:
Note:
1. Please make sure the direction in which you insert the card is right. Otherwise, the device and/or
the memory card may be damaged.
2. It is advised to format the card via the camera settings menu before the first use.
Video recording capacity (only for reference)
SD Card size
(1080P) 30F
(720P) 60F
16GB
120 min
160 min
8GB
60 min
80 min
4GB
30 min
40 min
2GB
15 min
20 min
Note: The number of shots that can be taken will vary depending on device settings, the subject and
the memory card used.
Product features
Full HD 1080p action camera with built-in microphone and speaker
IP68 full waterproof camera body, so no extra case needed
140 degrees ultra wide angle lens
WiFi function - for easy wireless control with smartphone or tablet
Free remote control app available in iOS and android app stores
Stores hours of video material on removable SD card (not included)
Built-in 1.5” color LCD screen
Supports single-, triple- and interval photo shooting
Practical instant snapshot button
Directions for Use
Charging:
This device is equipped with a rechargeable lithium battery. For the first three times, please
completely discharge the battery during use and charge the battery for 12 hours, so that the battery
can have its maximal efficiency.
For the first use, please charge the battery for 12 hours in one of the following ways:
1) Connect it to PC with USB data cable for charging.
2) Connect the USB cable with the USB charger and plug the charger into the power supply socket.
When charging, the blue indicator light will be on. When the battery is fully charged, the blue
indicator will turn off again.
Note:
1. When the battery is low, the camera will directly enter the power protected mode and cannot be
switched on. In such case, please charge it.
2. If an empty battery causes unforeseen white screen or halts, etc. Please reset the device and
recharge it.
General functions:
1 Press the POWER key shortly to switch the camera on. Hold the POWER key to switch off the
camera.
2 The camera will start up in video mode by default. Press the OK key to start recording. Press
OK again to stop recording and automatically save the video file.
3 In video mode (when not recording), press the “MENU” key shortly to enter the main settings
menu. Press the OK key to switch between ‘video’, ‘photo and ‘system’ settings. Press the
” key or the “ ” key to select menu items.<- +>
4 Hold the “MENU” key for 3 seconds to enter playback mode. Press the key or the <- +>
key to select the file type to be opened (video/photo/event) and press the OK key to enter the
file browser page. Use the or ” key to choose the file to browse through the files. In<- +>
case of a video file, press the OK key to start playing the file. Hold the “MENU” key to exit.
5 Press the “+>” key to enter the WIFI mode.
6 Hold the “+>” key to exit from the WIFI mode.
Settings menu
Switching between Video-, Photo- and System setup
Press the POWER key to switch the camera on, it is now in standby mode. To open the settings
menu, just press the “M” key. Press the “OK” key to switch between different menus
(video/photo/system). Within a selected menu you can use the / keys to select menu items<- +>
and press “OK” to confirm. Press the MENU (M) key to back to the previous menu.
1. Video setup menu
Press the Mkey to open the settings menu. Video settings will be selected by default.
Press the “<- +>” key to choose the option to be set up as follows and then press the/
OK key to confirm.
Resolution: select 1920*1080 (30 fps) or 1280*720 (60 fps).
Loop record: When this option is switched off, each video segment will be 30 minutes
long and the camera will keep recording until the SD card is full without deleting the
previous files recorded. When this option is switched on, each video segment will be 15
minutes long and the camera will keep recording until you press the record button, or when
the camera is turned off. If the SD card is full, the camera will overwrite the previous files
recorded, starting with the oldest recording.
Date stamp: Turn on/off the use of a date stamp in you videos
Exposure value: Depending on the recording environment, select
EV-2.1…EV-+0.0…EV-+2.1, etc..
2. Photo setup menu
Press the “M” key to open the settings menu and press OK once to switch to the photo menu. Press
the “<- +>” key to choose the option to be set up as follows and then press the OK key/
to confirm.
Resolution: 2M by default.
Single shot: When this option is switched on, the camera will take one picture at a time.
When enabled, all possible other settings (e.g. triple mode, continuous mode and self-timer)
will automatically be switched OFF. When either triple mode, continuous mode or
self-timer mode is turned on, the single shot photo mode will be automatically switched
off.
Triple shot: When this option is switched on, the camera will take three (3) pictures at a
time. When enabled, all possible other settings (e.g. single mode, continuous mode and
self-timer) will automatically be switched OFF. When either single mode, continuous
mode or self-timer mode is turned on, the triple shot photo mode will be automatically
switched off.
Self-timer: When this option is set as 5s or 10s, you may enter the self-timer mode; in such
case, single mode, continuous mode and triple mode are inactive and automatically trip to
OFF. In self-timer mode, press the shooting key, the camera will delay 5s or 10s to take
one picture. When any of single mode, continuous mode and triple mode is on, the
self-timer mode will be automatically off.
Continuous: This option allows the camera to take one picture every 2s, 3s, 5s, 10s, 20s,
30s or 60s until the card is full or when you stop the process by pressing the ”key.<-
When enabled, all possible other settings (e.g. single mode, triple mode and self-timer)
will automatically be switched OFF. When either single mode, triple mode or self-timer
mode is turned on, the continuous shot photo mode will be automatically switched off.
3. System setup menu
Press the “M” key to open the settings menu and press OK twice to switch to the system settings
menu. Press the “<- +>” key to choose the option to be set up as follows and then press/
the OK key to confirm.
Sounds: Shutter sound /Power-on tone selection/ Beep tone /Volume settings.
Power frequency: Automatic, 50Hz or 60Hz.
Screen saver: Turns the LCD display off after 1min /3min/5min/never.
Auto power-off: Turns the camera off after1min /3min/5min of non-usage (or never).
Date & Time: Set the correct date and time. Press the <-/+>”key to increase/decrease;
press the OK key to automatically switch among “Month/Date/Year” and “Hour/Minute”.
Language: Press the <-/+>key to choose the desired language; press the OK key to
confirm and go back to the previous menu.
Format: Use this function to format the SD card. Press the <-/+>”key to choose “Yes”
and press the OK key to start formatting the memory card; choose “No” and press the OK
key to exit from the current menu setup.
Screen rotation: Rotate the image by 180º.
Reset all: Restores camera to factory defaults
Version info: Display current software version.
Daily use: make videos, take pictures, charging and playback
Video: Press the POWER key to switch the camera on. The camera always starts up in video mode
and is now standby for recording a video. Press the REC/OK key to start recording. The right upper
corner of the screen will now display a flickering red “REC” icon. To lock the current video
segment, just press the “+” key during the recording. The left upper corner of the screen will now
display a lock icon. The file is now locked and saved into the EVENT folder.
Photo: In video mode, press the <-” key to switch to the photo mode. The camera will then take
one or more photos depending on you photo settings (single/triple shot, continues shot, etc). Press
“<-“ again to stop taking photos and return to video mode.
Charging: When you connect the camera to the charger, it will automatically turn on. The blue
LED charging indicator will turn on. If you press the REC/OK button now, the camera stops
charging and starts to record your video. When you stop recording, the charging will resume. It’s
possible to turn the camera off while charging, just press the “POWER” key to turn it off. The blue
charging indicator will stay on until the charging is complete.
Playback: Hold the “MENU” key for 3 seconds to pop up the playback mode menu,
press the “<- +>”keys to choose between Event/Video/Photo and the “OK” key to/
confirm your selection.
Press the OK key to start playing a selected video file. Hold the “MENU” key to exit when
done playing videos.
In playback mode, press the “ / key to choose to delete or lock the selected file, press the<- +>
“MENU” key shortly again to pop up DELETE/LOCK and press the OK key to confirm.
Press the “MENU” key to exit from the playback menu and then to exit from the playback
mode.
Connecting the camera to your PC
Use the included USB cable to connect the ACAM-W-01 action camera to your PC. The camera
display will then show 2 options: MSDC and PC-CAM. Press the “<-/+>” keys to select PC-CAM
and confirm with the OK key use the ACAM-W-01 as a PC webcam. Windows will recognize the
ACAM-W-01 as webcam and install needed drivers automatically. If you select the MSDC option,
the camera will be recognized as removable storage device, which allows you to view, copy or
delete all files on the internal SD card.
Note:
a) You can easily switch between the PC-CAM and MSDC mode by pressing the “M” key
on the camera at any time.
b) When you connect the ACAM-W-01 USB cable to a PC, but you do not want to make a
real data connection, just press the “M” key on the camera when the PC-CAM-MSDC
option screen is visible on the display. This will switch the camera into standard video
recording mode.
Setup WIFI: use your phone or tablet as remote control
To use your phone or tablet as remote control for your ACAM-W-01 camera, you will first need to
install the ISMART camera app from your app store. Just type ISMART in the search field of the
app store, or use below QR codes.
Turn the camera on and press the “+>” key to enter the WIFI mode. The camera display will show
“waiting for WiFi connection”. Now get your mobile phone or tablet, let it search the WIFI signal
from the camera and connect to it. When connecting to WiFi network of the camera, the mobile
phone will ask you to enter a password. The default WiFi password of the camera is 1234567890.
When the password is entered, the camera display will show “Connected”.
Now open the ISMART camera app on your mobile phone or tablet. You will see the camera image
right away. You can move the camera lens to ensure the image on your mobile phone or tablet will
also show this movement. If so, you are bow ready to record videos and take pictures with your
ACAM-W-01 camera via your mobile phone or tablet. You can also use your phone/tablet to watch
all recorded videos and pictures that are stored on the camera.
Android
Apple
NOTES:
a) For Android devices it is needed to also install MX Player (or other video player) for video
playback.
b) Different mobile phones may have different sounds, image smoothness and different WiFi
range, etc.
Connect to a TV with HDMI
Insert the mini connector of the HDMI cable into the HDMI OUT port of the camera and the
standard size connector into the HDMI port of the TV. Set the TV to the corresponding HDMI
mode to see the images from the camera. On the camera, select the desired video file and press
the OK key to start the video output to your TV.
Product Specs
Sensor
Full HD CMOS
Lens
140º
Focus range
12cm~infinite
Screen
1.5” LTPS TFT LCD
TV out
NTSC/PAL
Video format
.MOV (H.264)
Video
1920*1080(30 fps), 1280*720(60 fps)
Memory
MicroSD (TF) card (max. 32G )
Interface
USB 2.0, HDMI
Battery
Removable Lithium-ion battery, 1000 mAh
USB
USB 2.0
Dimensions/Weight
86 x 40 x 57 mm
Working temperature/humidity
0~40ºC / 10%~80%
Troubleshooting
Q: Unable to switch on?
A: Maybe the battery is empty. Please charge the battery and try again.
Q: Unable to take videos?
A: Please check the memory card capacity. Is there enough free space? Also check whether or
not it is inserted properly. Check the memory card in another device or PC to check for card
damage.
Q: No video on the TV screen?
A: Please check if the TV OUT cable HDMI connector is connected correctly. Also check your
TV HDMI settings, is it set to the correct HDMI IN?
Q: Unclear images/videos?
A: Clean the lens carefully with soft cloth before use
Q: The camera is not responding anymore, what to do?.
A: If the camera does not respond, please press the RESET button to restart the device.
Welkom
Bedankt voor uw keuze voor onze ACAM-W-01 Full HD action camera met WiFi-functie.
Deze gebruikershandleiding bevat belangrijke informatie over de ingebruikname, het gebruik en
het onderhoud en de technische specificaties van de camera. Lees deze handleiding aandachtig door
voor het eerste gebruik en bewaar deze voor later gebruik.
Overzicht van de camera
1. “OK” knop 7. Luispreker
2. “POWER” knop 8. Microfoon
3. “MENU” (M) knop 9. HDMI aansluiting
4. “<-” knop 10. SD kaartsleuf
5. “+>” knop 11. USB poort
6. Wide-angle lens 12. Batterij compartiment
Functieoverzicht knoppen
1. “OK” knop: bevestigen van keuzes, starten van opnames
2. “POWER” knop: aan/uitzetten van de camera
3. “M” knop: kort indrukken voor menu, lang indrukken voor afspeelmodus,
4. “<-“ key: Pijltje onlaag
5. “+>” key: Pijltje omhoog, wifi inschakelen
.
Nederlands
Batterij en geheugenkaart plaatsen
1. Open het waterdichte klepje dat het batterijcompartiment en de kaarsleuf afsluit
2. Schuif de batterij in de camera totdat de vergrendeling vastklikt
3. Plaats de SD geheugenkaart in de camera. Let erop dat u hem in de correcte positie plaatst, de
kaart past slechts op één manier.
4. Om de geheugenkaart weer te verwijderen drukt u zachtjes op de kaart om hem te ontgrendelen.
De kaart komt dan iets naar buiten zodat u hem kunt verwijderen.
5. Indien geen geheugenkaart is geplaast zal de melding “No card!” in het scherm van de camera
te zien zijn:
Note:
1. Let erop dat de geheugenkaart in de juiste richting/positie wordt geplaatst. Gebruik geen kracht
bij het plaatsen. Verkeerd plaatsen van de geheugenkaart kan tot schade aan de kaart en/of de
camera leiden.
2. Formatteer de geheugenkaart met behulp van het cameramenu voor het eerste gebruik in de
camera.
Video opnamecapaciteit (ter indicatie)
SD Card grootte
(1080P) 30fps
(720P) 60fps
16GB
120 min
160 min
8GB
60 min
80 min
4GB
30 min
40 min
2GB
15 min
20 min
Note: Het aantal foto’s en video’s dat u kunt maken is o.a. afhankelijk van het gefilmde object, de
omgevingsfactoren en de gebruikte SD kaart.
Productkenmerken
Full HD 1080p action camera met ingebouwde microfoon en speaker
Volledig waterdichte behuizing (IP68), dus geen extra hoesje nodig
140 graden groothoeklens
WiFi functie - voor het eenvoudig bedienen van de camera via telefoon of tablet
Gratis bedienings-app beschikbaar in de app-stores van Android en Apple
Maakt gebruik van SD geheugenkaart om de video's op te slaan (niet inbegrepen)
Ingebouwd 1,5" LCD-scherm
Ondersteunt enkele-, drievoudige-, interval- en serieopnames
Praktische instant snapshot knop voor het maken van foto s
Complete set met meerdere accessoires
Het gebruik van de camera
Opladen:
Uw camera is uitgerust met een lithium batterij. Het wordt aangeraden de batterij de eerste drie keer
volledig leeg te maken tijdens gebruik en vervolgens voor minimaal 12 uur op te laden.
Voor het eerste gebruik dient u de batterij 12 uur op te laden op één van onderstaande manieren:
1) aansluiten op de USB-poort van een PC
2) sluit de camera aan op het lichtnet met een 5V USB stekkeradapter om hem op te laden.
Tijdens het laden zal het blauwe indicatielampje branden. Zodra de batterij volledig is opgeladen
zal dit indicatielampje weer uitgaan.
Note:
1. Als de batterij bijna leeg zal de camera in de zogeheten ‘power protected’ modus schakelen. U
kunt de camera dan niet aanzetten. Laad in een dergelijk geval de camera op, zodat u hem weer
kunt gebruiken.
2. Als de camera door een lege batterij onverhoopt een wit scherm laat zien of andere problemen
veroorzaakt, reset de camera dan met de resetknop en laad de batterij volledig op.
Basisfuncties:
1 Druk kort op de POWER knop om de camera aan te zetten. Druk iets langer op de POWER
knop om de camera weer uit te zetten.
2 De camera start altijd op in videomodus. Druk op de OK knop op een opname te starten en te
stoppen. De video wordt dan automatisch opgeslagen.
3 In de videomodus (maar niet tijdens een opname), drukt u kort op de “MENU” knop om het
instellingenmenu te openen. Druk kort op de OK knop om te wisselen tussen het menu voor
‘video’, ‘foto’ en ‘systeeminstellingen. Druk op de knop of de knop om door de<- +>
menu’s te navigeren.
4 Houd de “MENU” knop ingedrukt voor 3 seconden om de afspeelmodus te activeren. Gebruik
de pijltjestoetsen om het gewenste bestandstype te zelecteren (video/foto/event) en druk op de
OK knop om te bevestigen. Gebruik de pijltjestoetsen om door de bestanden te navigeren. Bij
videobestanden drukt u op de OK knop om af te spelen. Houd de “MENU” knop ingedrukt op
de afspeelmodus weer te verlaten.
5 Druk op de pijltje omhoog “+>” knop om de wifi-functie te activeren.
6 Houd de pijltje omhoog “+>” knop iets lager ingedrukt om de wifi-functie weer te deactiveren.
Gebruik van het instellingenmenu
Wisselen tussen het Video-, foto- en Systeemmenu
Zet de camera aan met de POWER knop, de camera staat nu in standby modus. Druk nu op de “M”
knop om het menu te openen. Druk kort op de “OK knop om te wisselen tussen de verschillende
menu’s (video/foto/systeem). Binnen de menu’s kunt u met de / pijltjestoetsen door het<- +>
menu navigeren en keuzes bevestigen met de “OK” knop. Druk op de MENU (M) knop om naar
een vorig menu terug te keren.
Videomenu
Druk op de “M” knop om het menu te openen. Het videomenu wordt dan automatisch als
eerste geopend. Binnen het menu kunt u met de / pijltjestoetsen navigeren en keuzes<- +>
bevestigen met de “OK” knop.
Resolution: selecteer 1920*1080 (30 fps) of 1280*720 (60 fps).
Loop record: Als deze functie staat uitgeschakeld is elk videosegment 30 minuten lang en
zal de camera doorgaan met opnemen totdat de geheugenkaart vol is. Als deze functie is
ingeschakeld dan zal de camera video’s op nemen in segmenten van 15 minuten en zal de
camera continu doorgaan met opnemen totdat u weer op de OK knop drukt, of de camera
uitschakelt. Als de geheugenkaart vol is, dan zal de camera automatisch de oudste
videosegmenten gaan overschrijven.
Date stamp: Het wel of niet laten zien van de tijd en datum in de video’s
Exposure value: Hier kunt u d belichtingswaarde instellen, afhankelijk van de
omgevingsfactoren en lichtomstandigheden. Standaardinstelling is 0.0, mogelijk is:
EV-2.1…EV-+0.0…EV-+2.1, etc..
Fotomenu
Druk op de “M” knop om het menu te openen en druk nogmaals op de “M” knop om naar het
fotomenu te schakelen Binnen het menu kunt u met de / pijltjestoetsen navigeren en.<- +>
keuzes bevestigen met de “OK” knop.
Resolution: 2M is standaard.
Single shot: Als u deze functie inschakelt dan neemt de camera één enkele foto per keer.
Als u deze functie inschakelt zullen andere fotofuncties (zoals triple mode, continuous
mode en de self-timer) automatisch worden uitgeschakeld. Zodra u een andere fotofunctie
inschakelt (zoals triple mode, continuous mode en de self-timer), dan wordt de single shot
functie automatisch uitgeschakeld.
Triple shot: Als u deze functie inschakelt dan neemt de camera drie foto’s per keer. Als u
deze functie inschakelt zullen andere fotofuncties (zoals single shot, continuous mode en
de self-timer) automatisch worden uitgeschakeld. Zodra u een andere fotofunctie
inschakelt (zoals single shot, continuous mode en de self-timer), dan wordt de Triple shot
functie automatisch uitgeschakeld.
Self-timer: Met deze functie kunt u de afdrukvertraging instellen op 5 of 10 seconden. Als
u deze functie inschakelt zullen andere fotofuncties (zoals single shot, continuous mode en
triple shot) automatisch worden uitgeschakeld.
Continuous: Met deze functie kunt u de camera elke 2, 3, 5, 10, 20, 30 of 60 seconden
autoatisch een foto laten maken totdat de geheugenkaart vol is. U kunt de opnames stoppen
door op de ” knop te drukken. Als u deze functie inschakelt zullen andere fotofuncties<-
(zoals single shot, tripple shote en de self-timer) automatisch worden uitgeschakeld.
Systeem menu
Druk op de “M” knop om het menu te openen en druk nog tweemaal op de “M” knop om naar het
systeemmenu te schakelen Binnen het menu kunt u met de / pijltjestoetsen navigeren en.<- +>
keuzes bevestigen met de “OK” knop.
Sounds: Voorkeuren voor geluiden en volume instellen.
Power frequency: Frequentie van het lichtnet instellen op automatisch, 50Hz of 60Hz.
Screen saver: Automatische uitschakeling van het beeldscherm instellen op: 1/3/5
minuten of nooit.
Auto power-off: Automatische uitschakeling van de camera instellen op: 1/3/5 minuten of
nooit. (in het geval de camera aan staat, maar niet wordt gebruikt)
Date & Time: Datum en tijd instellen. Gebruik de “ / pijltjestoetsen om waardes in<- +>
te stellen, druk op de OK knop om te wisselen tussen “Maand/Dag/Jaar” en “Uur/Minuut”.
Language: Druk op de /<- +>” knoppen om de gewenste taal te selecteren en druk op OK
om te bevestigen.
Format: Gebruik deze functie om de geheugenkaart te formatteren. Gebruik de
pijltjestoetsen / om “Yes” te selecteren en druk op OK om het formatteren te<- +>
starten. (Kies “No als u toch niet wilt formatteren en druk op OK om het menu te
verlaten).
Screen rotation: Draai het beeld van de camera 180º.
Reset all: Camera terugzetten naar de fabrieksinstellingen
Version info: Tonen van de huidige softwareversie.
Dagelijks gebruik: Video’s of fotos maken en afspelen en de
batterij opladen
Video: Druk op de POWER knop om de camera aan te zetten. De camera start altijd op in video
modus, dus is gelijk klaar om een opname te starten. Druk op de REC/OK knop om de opname te
starten. In de rechterbovenhoek van het scherm knippert nu een rood “REC” icoon. Om een
video-opname te beveiligen tegen overschrijven drukt u tijds het opnemen op de “+>” knop. In de
linkerbovenhoek van het scherm verschijn nu een icon van een slotje. Het bestand is nu beveiligd
en kan worden teruggevonden in de EVENT map.
Foto: De camera start altijd op in video modus, druk op de <-knop om naar de foto modus te
schakelen en een foto te nemen. De camera neemt dan gelijk één of meerdere fotos, afhankelijk
van de instellingen (single/triple shot, continues shot, etc). Druk eventueel nogmaals op de
“<-“ knop om continu-opnamen te stoppen en de camera weer terug te zetten in de video modus.
Opladen: Als u de camera met de USB-kabel aansluit op een 5V voedingsbron, dan schakelt deze
automatisch aan en gaat de blauwe LED branden. Als u nu op de REC/OK knop druk stopt de
camera met opladen en zal een video opname gestart worden, het opladen wordt weer hervat zodra
u stopt met het opnemen van de video. Het is mogelijk de camera uit te zetten tijdens het laden,
druk hiervoor op de “POWER” knop. De blauwe LED laadindicator blijft aan tot het laden is
voltooid.
Playback: Houd de “MENU” knop gedurende 3 seconden ingedrukt om de playback
modus te activeren. Druk op de pijltjestoetsen om te kiezen voor Event/Video/Photo en
druk op “OK” om te bevestigen.
Druk op OK om een geselecteerd videobestand af te spelen. Houd de “MENU” knop ingedrukt
om de afspeelmodus weer te verlaten als u klaar bent met het bekijken van video’s.
Als u in de playback modus op de MENU knop drukt komt er een menu tevoorschijn waarmee
u bestanden kunt vergrendelen of juist verwijderen. Maak uw keuze met de <- +>/ ”
pijltjestoetsen en bevestig met de “OK” knop.
Als u in de playback modus voor 2 seconden op de MENU knop drukt, keert u weer terug naar
het beginscherm van de playback modus. Druk op de pijltjestoetsen om te kiezen voor
Event/Video/Photo en druk op “OK” om te bevestigen, of druk nogmaals kort op
de MENU knop om de playbackmodus weer te verlaten.
De camera aansluiten op een PC
Gebruik de bijgesloten USB-kabel om uw ACAM-W-01 camera op uw PC aan te sluiten. Op het
scherm van de camera worden dan twee opties getoond: MSDC en PC-CAM. Gebruik de
pijltjestoetsen om uw keuze te selecteren en druk op OK om te bevestigen. Als u kiest voor de optie
‘PC-CAM’ dan kunt u de ACAM-W-01 als webcam op uw PC gebruiken. Windows zal de
ACAM-W-01 als webcam herkennen en alle benodigde drivers automatisch installeren. Als u kiest
voor de ‘MSDC’ optie, dan zal uw PC de camera herkennen als een apparaat voor massaopslag. Op
deze manier kunt u eenvoudig de bestanden op de interne geheugenkaart bekijken, kopiëren of
verwijderen.
Note:
a) U kunt eenvoudig wisselen tussen de PC-CAM en MSDC modus door op de “M” knop
op uw camera te drukken.
b) Als u de ACAM-W-01 met de USB-kabel op een PC aansluit, maar geen dataverbinding
wiltlaten maken, dan drukt u op de “M” knop zodar het keuzescherm PC-CAM-MSDC in
beeld is op het scherm van de camera. De camera zal dan naar de standaard videomodus
schakelen.
WIFI: Gebruik uw smartphone of tablet als afstandsbediening
Om uw telefoon of tablet te kunnen gebruiken als afstandsbediening voor de ACAM-W-01 camera,
dient u eerst de ISMART camera app te downloaden uit de app store en te installeren op uw
telefoon of tablet. Type hiervoor ISMART in het zoekveld binnen de app store, of gebruik
onderstaande QR codes.
Zet de camera aan en druk op de “+>” knop om de WIFI-functie te activeren. Op het scherm van de
camera staat nu “waiting for WiFi connection”. Laat uw telefoon of tablet nu zoeken naar
beschikbare WiFi netwerken. Het netwerk van de camera staat in het lijstje met de beschikbare
netwerken, maak hier verbinding mee. Het benodigde wachtwoord is: 1234567890.
Zodra u het wachtwoord heeft ingevoerd staat er “Connected” in het scherm van de camera.
Open nu de ISMART camera app op uw telefoon of tablet. U krijgt nu gelijk het beeld van de
cameralens te zien. Beweeg de camera heen en weer om te controleren of het beeld op de telefoon
of tablet meebeweegt. ZO ja, dan bent u nu klaar om video’s en foto’s te maken met uw
ACAM-W-01 camera via uw telefoon of tablet. U kunt ook alle eerder opgenomen foto’s en video’s
op het scherm van de telefoon of tablet terugkijken.
NOTES:
c) Voor Android telefoons/tablets kan het nodig zijn om ook MX Player (of een andere video
player) te installeren voor het afspelen van video’s.
d) Verschillende telefoons en tablets kunnen verschillen vertonen in vloeiendheid van het
beeld, geluiden, wifi ontvangst, etc..
De camera aansluiten op een HDMI TV
Hiervoor heeft u een HDMI kabel met mini HDMI stekker nodig. Sluit vervolgens de mini HDMI
stekker aan op de camera en de standaard HDMI stekker op de TV. Stel de TV in op het juiste
HDMI ingangssignaal en het beeld van de camera is te zien op de TV. Selecteer het gewenste
bestand op de camera en druk op OK om het bestand af te spelen op de TV.
Android
Apple
A propos de ce manuel :
Merci d’avoir acheté l’Action cam HD référence : ACAM-W-01, étanche et avec fonctions WIFI.
Veuillez lire ce manuel avant d’utiliser l’Action Cam et le conserver à titre de référence future. Pour
le dépannage, reportez vous à la rubrique dépannage.
Nom des éléments :
1. Touche “OK” 7. Haut parleur
2. Touche “ON/OFF” 8. Microphone
3. Touche “MENU” (M) 9. Port HDMI
4. Touche “<-” 10. Logement de carte SD
5. Touche “+>” 11. Port USB
6. Super grand angle 12. Logement batterie
Les functions des touches
1. Touche “OK” pour confirmation
2. Touche “ON/OFF” pour Marche ou Arrêt
3. Touche “M”: appuie rapide = touche fonction menu; appui long = lecture / validé
4. Touche “<-“BAS
5. Touche “+>”: HAUT / function WIFI


Produktspezifikationen

Marke: Gembird
Kategorie: Sportkamera
Modell: Action cam Full HD

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gembird Action cam Full HD benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Sportkamera Gembird

Bedienungsanleitung Sportkamera

Neueste Bedienungsanleitung für -Kategorien-