GE ZGU3650WBWG Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für GE ZGU3650WBWG (16 Seiten) in der Kategorie Fornuis. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/16
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT An de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
Cat. No. / No de cat.
2551-20
M12 FUEL™ SURGE™ 1/4" HEX HYDRAULIC DRIVER
TOURNEVIS HYRDRAULIQUE À TÊTE HEXAGONALE SURGE™
M12 FUEL™ DE 6 mm (1/4")
DESTORNILLADOR HIDRÁULICO HEXAGONAL SURGE™
M12 FUEL™ DE 6 mm (1/4")
2
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING
Read all safety warnings, instruc-
tions, illustrations and specica-
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, re and/or serious injury. Save all
warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-oper-
ated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operat-
ing a power tool. Distractions can cause you to lose
control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
• Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
• Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
• If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of an GFCI reduces
the risk of electric shock.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as a dust mask, non-skid safety shoes, hard hat or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch
is in the o-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on
the switch or energizing power tools that have the
switch on invites accidents.
• Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
• Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
• If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
• Do not let familiarity gained from frequent use
of tools allow you to become complacent and
ignore tool safety principles. A careless action can
cause severe injury within a fraction of a second.
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool
will do the job better and safer at the rate for which
it was designed.
• Do not use the power tool if the switch does not
turn it on and o. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
• Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from
the power tool before making any adjustments,
changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of
starting the power tool accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may aect the power tool’s operation. If damaged,
have the power tool repaired before use. Many ac-
cidents are caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations dierent from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used
with another battery pack.
• Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
• When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
3
to another. Shorting the battery terminals together
may cause burns or a re.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam-
aged or modied. Damaged or modied batteries
may exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
• Do not expose a battery pack or tool to re or
excessive temperature. Exposure to re or tem-
perature above 265°F (130°C) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
• Have your power tool serviced by a qualied
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
SPECIFIC SAFETY RULES
FOR IMPACT DRIVERS
• Hold power tool by insulated gripping surfaces,
when performing an operation where the fas-
tener may contact hidden wiring. Fasteners con-
tacting a “live” wire may make exposed metal parts
of the power tool “live” and could give the operator
an electric shock.
• Wear ear protectors when impact drilling. Expo-
sure to noise can cause hearing loss.
• Use only sockets and other accessories spe-
cically designed for use on impact wrenches
and drivers. Other sockets and accessories might
shatter or break causing injury.
•
WARNING
To reduce the risk of injury in ap-
plications that produce a consid-
erable amount of dust, use an OSHA compliant
dust extraction solution in accordance with the
solution’s operating instructions.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
•
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other
masonry products, and
• arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
lter out microscopic particles.
FUNCTIONAL DESCRIPTION
5
7
6
8
2
1
4
3
1. Hex drive chuck
2. 4-Mode drive
control
3. Belt hook
4. Fuel gauge
5. Control switch
6. Handle
7. Trigger
8. LED
SYMBOLOGY
Volts
Direct Current
No Load Revolutions per Minute (RPM)
Impacts per Minute Under Load (IPM)
C US
UL Listing for Canada and U.S.
SPECIFICATIONS
Cat. No. 2551-20 .....................................................
Volts 12 DC..............................................................
Battery Type .................................................M12™
Charger Type M12™................................................
Recommended Ambient
Operating Temperature ......................0°F to 125°F
RPM .......................................................... 0 - 3 200
IPM ........................................................... 0 - 3 400
ASSEMBLY
WARNING
Recharge only with the charger
specied for the battery. For spe-
cic charging instructions, read the operator’s
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, push in the release buttons
and pull the battery pack away from the tool.
WARNING
Always remove battery pack before
changing or removing accessories.
To insert the battery, slide the pack into the body
of the tool. Make sure it latches securely into place.
WARNING
Only use accessories specically
recommended for this tool. Others
may be hazardous.
Produktspezifikationen
Marke: | GE |
Kategorie: | Fornuis |
Modell: | ZGU3650WBWG |
Brauchst du Hilfe?
Wenn Sie Hilfe mit GE ZGU3650WBWG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Fornuis GE
3 Oktober 2024
3 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
2 Oktober 2024
1 Oktober 2024
30 September 2024
23 September 2024
Bedienungsanleitung Fornuis
- Fornuis Samsung
- Fornuis AFK
- Fornuis Infiniton
- Fornuis Clatronic
- Fornuis Domo
- Fornuis Emerio
- Fornuis Coline
- Fornuis Ernesto
- Fornuis Tristar
- Fornuis Manta
- Fornuis Medion
- Fornuis Nedis
- Fornuis SilverCrest
- Fornuis Hanseatic
- Fornuis Panasonic
- Fornuis Clas Ohlson
- Fornuis LG
- Fornuis Adler
- Fornuis Bestron
- Fornuis Camry
- Fornuis Guzzanti
- Fornuis MX Onda
- Fornuis Princess
- Fornuis Royal Catering
- Fornuis Trisa
- Fornuis Bosch
- Fornuis AEG
- Fornuis Ambiano
- Fornuis Ardes
- Fornuis Asko
- Fornuis Siemens
- Fornuis ATAG
- Fornuis Bauknecht
- Fornuis Bifinett
- Fornuis Buffalo
- Fornuis Caso
- Fornuis Concept
- Fornuis Electrolux
- Fornuis Ellrona
- Fornuis Fagor
- Fornuis Gaggenau
- Fornuis Gorenje
- Fornuis Jata
- Fornuis Klarstein
- Fornuis Koenic
- Fornuis Küppersbusch
- Fornuis Miele
- Fornuis Proficook
- Fornuis Rommelsbacher
- Fornuis Severin
- Fornuis Teka
- Fornuis Whirlpool
- Fornuis Bomann
- Fornuis Essentiel B
- Fornuis First Austria
- Fornuis Hendi
- Fornuis Korona
- Fornuis Listo
- Fornuis OK
- Fornuis Russell Hobbs
- Fornuis Steba
- Fornuis Taurus
- Fornuis Tefal
- Fornuis Vox
- Fornuis IKEA
- Fornuis ECG
- Fornuis König
- Fornuis Bush
- Fornuis Thomson
- Fornuis Amica
- Fornuis BEKO
- Fornuis Blaupunkt
- Fornuis Boretti
- Fornuis Cuisinart
- Fornuis Eldom
- Fornuis Eta
- Fornuis Fritel
- Fornuis Grundig
- Fornuis Heinner
- Fornuis Hotpoint
- Fornuis Inventum
- Fornuis Kenwood
- Fornuis KitchenAid
- Fornuis Schneider
- Fornuis Sharp
- Fornuis Smeg
- Fornuis Tomado
- Fornuis Waring Commercial
- Fornuis Wilfa
- Fornuis Witt
- Fornuis WMF
- Fornuis Dometic
- Fornuis Outwell
- Fornuis Alpina
- Fornuis Ardo
- Fornuis Aspes
- Fornuis Atlantic
- Fornuis Balay
- Fornuis Blomberg
- Fornuis Scandomestic
- Fornuis Brandt
- Fornuis Candy
- Fornuis Castor
- Fornuis Constructa
- Fornuis Corberó
- Fornuis Curtiss
- Fornuis Daewoo
- Fornuis Edesa
- Fornuis Elektra Bregenz
- Fornuis ELIN
- Fornuis Eurotech
- Fornuis Everglades
- Fornuis Exquisit
- Fornuis Finlux
- Fornuis Haier
- Fornuis High One
- Fornuis Hisense
- Fornuis Hoover
- Fornuis Arthur Martin
- Fornuis Hotpoint-Ariston
- Fornuis Iberna
- Fornuis Ignis
- Fornuis Bartscher
- Fornuis Indesit
- Fornuis Juno
- Fornuis Baumatic
- Fornuis Kelvinator
- Fornuis Bertazzoni
- Fornuis Luxor
- Fornuis Lynx
- Fornuis Maytag
- Fornuis Midea
- Fornuis Caple
- Fornuis Neff
- Fornuis Nordmende
- Fornuis PKM
- Fornuis Privileg
- Fornuis Progress
- Fornuis Rex
- Fornuis Rommer
- Fornuis ETNA
- Fornuis Scholtès
- Fornuis Frigidaire
- Fornuis Svan
- Fornuis Techwood
- Fornuis Thor
- Fornuis V-ZUG
- Fornuis Vestel
- Fornuis Vestfrost
- Fornuis Junker
- Fornuis Zanker
- Fornuis Kaiser
- Fornuis Zanussi
- Fornuis Zanussi-Electrolux
- Fornuis KKT Kolbe
- Fornuis Zerowatt
- Fornuis Leonard
- Fornuis M-System
- Fornuis Monogram
- Fornuis Oranier
- Fornuis Pelgrim
- Fornuis Philco
- Fornuis Respekta
- Fornuis Rosières
- Fornuis Thermador
- Fornuis Viva
- Fornuis Eurom
- Fornuis Altus
- Fornuis Arçelik
- Fornuis Continental Edison
- Fornuis Hyundai
- Fornuis Kernau
- Fornuis Orava
- Fornuis Tesla
- Fornuis Livoo
- Fornuis Imperial
- Fornuis Liebherr
- Fornuis Elica
- Fornuis Bimar
- Fornuis Sencor
- Fornuis DeLonghi
- Fornuis Biltema
- Fornuis Element
- Fornuis Eico
- Fornuis Ariete
- Fornuis Efbe-Schott
- Fornuis Franke
- Fornuis Kalorik
- Fornuis Optimum
- Fornuis Scarlett
- Fornuis Tripp Lite
- Fornuis Cecotec
- Fornuis Zephir
- Fornuis Husqvarna
- Fornuis Wolkenstein
- Fornuis Gemini
- Fornuis Frilec
- Fornuis Foster
- Fornuis Opera
- Fornuis Atlas
- Fornuis Silverline
- Fornuis Cramer
- Fornuis Binatone
- Fornuis Novy
- Fornuis Airforce
- Fornuis Airlux
- Fornuis Cata
- Fornuis Cylinda
- Fornuis De Dietrich
- Fornuis Dominox
- Fornuis Elba
- Fornuis Falcon
- Fornuis Falmec
- Fornuis Faure
- Fornuis Hansa
- Fornuis Leisure
- Fornuis Lofra
- Fornuis MPM
- Fornuis Nodor
- Fornuis Stoves
- Fornuis Thermex
- Fornuis UPO
- Fornuis Friac
- Fornuis Logik
- Fornuis Team
- Fornuis GYS
- Fornuis Veripart
- Fornuis Thetford
- Fornuis Dacor
- Fornuis Champion
- Fornuis Campart
- Fornuis Campingaz
- Fornuis Americana
- Fornuis Bluesky
- Fornuis Heller
- Fornuis Orima
- Fornuis Proline
- Fornuis Dimplex
- Fornuis Faber
- Fornuis Kayoba
- Fornuis Matrix
- Fornuis Cambridge
- Fornuis Mora
- Fornuis Westinghouse
- Fornuis Eccotemp
- Fornuis Wolf
- Fornuis Amana
- Fornuis Arthur Martin-Electrolux
- Fornuis Euromaid
- Fornuis Gram
- Fornuis NextBase
- Fornuis Vivax
- Fornuis Omega
- Fornuis Profilo
- Fornuis Sauber
- Fornuis Zelmer
- Fornuis Kleenmaid
- Fornuis Lamona
- Fornuis Limit
- Fornuis Meireles
- Fornuis Vitrokitchen
- Fornuis Breville
- Fornuis Kogan
- Fornuis Navitel
- Fornuis Benavent
- Fornuis Edy
- Fornuis Hoover-Helkama
- Fornuis New Pol
- Fornuis BORA
- Fornuis Zenith
- Fornuis Insignia
- Fornuis Cosmo
- Fornuis Crosley
- Fornuis Xblitz
- Fornuis Danby
- Fornuis Viking
- Fornuis Vedette
- Fornuis Sogo
- Fornuis Tracer
- Fornuis Ariston Thermo
- Fornuis Mellerware
- Fornuis Proctor Silex
- Fornuis Signature
- Fornuis RCA
- Fornuis Bellini
- Fornuis Swan
- Fornuis AYA
- Fornuis Fisher & Paykel
- Fornuis Esatto
- Fornuis Drew & Cole
- Fornuis Orbegozo
- Fornuis Napoleon
- Fornuis Ilve
- Fornuis Furrion
- Fornuis Izzy
- Fornuis CDA
- Fornuis Flavel
- Fornuis Saturn
- Fornuis Cadac
- Fornuis Eurochef
- Fornuis Berg
- Fornuis Defy
- Fornuis Duronic
- Fornuis Edilkamin
- Fornuis Emax
- Fornuis Firefriend
- Fornuis Fratelli Onofri
- Fornuis ILive
- Fornuis Jocel
- Fornuis Kenmore
- Fornuis La Germania
- Fornuis Lacanche
- Fornuis Landmann
- Fornuis Magic Chef
- Fornuis Marynen
- Fornuis Rangemaster
- Fornuis Roadeyes
- Fornuis Salton
- Fornuis Sirius
- Fornuis Solitaire
- Fornuis SPT
- Fornuis Technika
- Fornuis Tecnolux
- Fornuis Weasy
- Fornuis WLA
- Fornuis BLANCO
- Fornuis Parmco
- Fornuis Hatco
- Fornuis Melchioni
- Fornuis Barbecook
- Fornuis Avanti
- Fornuis Kunft
- Fornuis Kucht
- Fornuis Roller Grill
- Fornuis Becken
- Fornuis Wells
- Fornuis Nevir
- Fornuis JennAir
- Fornuis Rinnai
- Fornuis Winia
- Fornuis BlueStar
- Fornuis Romo
- Fornuis Girmi
- Fornuis Ravanson
- Fornuis Fulgor Milano
- Fornuis German Pool
- Fornuis ZLine
- Fornuis K&H
- Fornuis Creda
- Fornuis Arctic Cooling
- Fornuis Zavor
- Fornuis Barazza
- Fornuis Artusi
- Fornuis MSR
- Fornuis Vulcan
- Fornuis Glem Gas
- Fornuis Nemco
- Fornuis Nesco
- Fornuis Nutrichef
- Fornuis Cuckoo
- Fornuis Sôlt
- Fornuis Blodgett
- Fornuis Chef
- Fornuis APW Wyott
- Fornuis Khind
- Fornuis Hestan
- Fornuis Koblenz
- Fornuis Promis
- Fornuis Hiberg
- Fornuis Spring USA
- Fornuis Gasmate
- Fornuis Companion
- Fornuis LERAN
- Fornuis Belling
- Fornuis Cookology
- Fornuis Summit
- Fornuis Forge Adour
- Fornuis Brastemp
- Fornuis ARC
- Fornuis Consul
- Fornuis Linarie
- Fornuis YUNA
- Fornuis Mabe
- Fornuis Coyote
- Fornuis Lafe
- Fornuis Atosa
- Fornuis Fiap
- Fornuis Esmaltec
- Fornuis DPM
- Fornuis Euro Appliances
- Fornuis InAlto
- Fornuis Backyard Pro
- Fornuis Capital
- Fornuis Apelson
- Fornuis PITT
- Fornuis Electroline
- Fornuis Germanica
- Fornuis Café
- Fornuis Porter & Charles
- Fornuis Ribimex
- Fornuis Aga
- Fornuis Jenn-Air
- Fornuis New World
- Fornuis Brixton
- Fornuis Belion
- Fornuis Tisira
- Fornuis Verona
- Fornuis Simfer
- Fornuis Adora
- Fornuis Triomph
- Fornuis KB Elements
- Fornuis Pando
- Fornuis Wiggo
- Fornuis Nestor Martin-Electrolux
- Fornuis Kluge
- Fornuis Imarflex
- Fornuis Mayer
- Fornuis Acros
- Fornuis HomeCraft
- Fornuis La Cornue
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024
5 Oktober 2024