Garret Ace 200 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garret Ace 200 (11 Seiten) in der Kategorie Metalldetektor. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/11
© 2016 Garrett Electronics, Inc. PN 1534100.A.0316
1881 W. State Street
Garland, Texas 75042
USA
Tel: 1.972.494.6151
Email: sales@garrett.com
Fax: 1.972.494.1881
Owner’s Manual
English/Spanish
ACE 200â„¢ 1
TABLE OF CONTENTS
ACE 200 Control Panel ........................................................... 2
Quick Start Guide .................................................................... 3
ACE 200 Contents ................................................................... 4
Detector Assembly .................................................................. 5
Power On/Basic Controls ........................................................ 6
Target Information ................................................................... 7
Audio Features ........................................................................ 8
Selecting Modes (Discrimination Patterns) ............................... 9
Sensitivity ..............................................................................10
Bench Tests ...........................................................................11
Hunting Tips With Your ACE 200 .......................................... 12
Troubleshooting Guide .......................................................... 14
Battery Replacement ............................................................15
Metal Detecting Code of Ethics ............................................16
Cautions ................................................................................. 17
Caring For Your ACE 200 Detector ....................................... 17
ACE 200 Warranty / Service ................................................18
ACE 200 Accessories ............................................................ 19
2Garrett Metal Detectors ACE 200â„¢ 3
QUICK START GUIDE
1. Power ON.
Press and release the ON / OFF Power button. The ACE 200
powers on in the last mode used, automatically adjusts for
ground minerals and is ready to search. The detector
operates with four (4) AA batteries which are already
installed by Garrett. (Factory default mode is Coins.)
2. Select Mode.
Use the Mode button to select a different detection mode,
when desired.
3. Adjust settings.
Adjust Sensitivity setting, if desired.
4. Begin scanning.
Lower the searchcoil to approximately 1 inch above the
ground and scan the coil left and right at approximately
3 ft/second. The coil must be in motion for target
detection.
ACE 200 CONTROL PANEL
Sensitivity
Setting
MODE
Button
selects detection mode (i.e.
discrimination pattern).
Power ON / OFF:
hold 5 seconds for
Factory Reset.
Depth
Indicator
indicates depth
of coin-sized
target.
Mode
Indicator
Target ID Legend
indicates metal types.
Lower Scale
indicates notch
discrimination
pattern.
Target ID Cursor
indicates probable target identity.
SENSITIVITY
Button
increases or decreases
sensitivity.
Digital
Target ID
Low Battery
Level
Indicator


Produktspezifikationen

Marke: Garret
Kategorie: Metalldetektor
Modell: Ace 200

Brauchst du Hilfe?

Wenn Sie Hilfe mit Garret Ace 200 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten