Garmin echoMAP 73dv Bedienungsanleitung
Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garmin echoMAP 73dv (4 Seiten) in der Kategorie Marine. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/4
echoMAP™ 70/90 Series Installation
Instructions
To obtain the best performance and to avoid damage to your
boat, install the device according to these instructions.
Read all installation instructions before proceeding with the
installation. If you experience difficulty during the installation,
contact Garmin® Product Support.
Important Safety Information
WARNING
See the guide in the Important Safety and Product Information
product box for product warnings and other important
information.
When connecting the power cable, do not remove the in-line
fuse holder. To prevent the possibility of injury or product
damage caused by fire or overheating, the appropriate fuse
must be in place as indicated in the product specifications. In
addition, connecting the power cable without the appropriate
fuse in place voids the product warranty.
CAUTION
Always wear safety goggles, ear protection, and a dust mask
when drilling, cutting, or sanding.
NOTICE
When drilling or cutting, always check what is on the opposite
side of the surface.
To obtain the best performance and to avoid damage to your
boat, install the device according to these instructions.
Read all installation instructions before proceeding with the
installation. If you experience difficulty during the installation,
contact Garmin Product Support.
Registering Your Device
Help us better support you by completing our online registration
today.
• Go to .http://my.garmin.com
• Keep the original sales receipt, or a photocopy, in a safe
place.
Contacting Garmin Product Support
• Go to for in-country support www.garmin.com/support
information.
• In the USA, call 913-397-8200 or 1-800-800-1020.
• In the UK, call 0808 238 0000.
• In Europe, call +44 (0) 870 850 1241.
Tools Needed
• Drill and drill bits
• #2 Phillips screwdriver
• Jigsaw or rotary tool
• File and sandpaper
• Marine sealant (optional)
Mounting Considerations
The device can be mounted using the included bracket, or it can
be mounted flush with the dashboard using a flush-mount kit
(may be sold separately).
Before permanently installing any part of your device, you
should plan the installation by determining the location of the
various components.
• The mounting location must provide a clear view of the
screen and access to the keys on the device.
• The mounting location must be sturdy enough to support the
device and the mount.
• The cables must be long enough to connect the components
to each other and to power.
• The cables can be routed under the bail mount or behind the
device.
• To avoid interference with a magnetic compass, the device
should not be installed closer to a compass than the
compass-safe distance value listed in the product
specifications.
Bail Mounting the Device
NOTICE
If you are mounting the bracket on fiberglass with screws, it is
recommended to use a countersink bit to drill a clearance
counterbore through only the top gel-coat layer. This will help to
avoid cracking in the gel-coat layer when the screws are
tightened.
Stainless-steel screws may bind when screwed into fiberglass
and overtightened. It is recommended to apply an anti-seize
lubricant on the screws before installing them.
1Select the mounting hardware appropriate for your mounting
surface and for the bail-mount bracket.
2Using the bail-mount bracket À as a template, mark the pilot
holes through the screw holes Á.
3Using a drill bit appropriate for the mounting hardware, drill
the four pilot holes.
4Using the selected mounting hardware, secure the bail-mount
bracket to the mounting surface.
5Place the device into the cradle Â.
6Install the bail-mount knobs à on the sides of the device.
7Place the cradle in the bail-mount bracket and tighten the
bail-mount knobs.
Flush Mounting the Device
NOTICE
Be careful when cutting the hole to flush mount the device.
There is only a small amount of clearance between the case and
the mounting holes, and cutting the hole too large could
compromise the stability of the device after it is mounted.
Using a metal pry tool such as a screwdriver can damage the
trim caps and the device. Use a plastic pry tool when possible.
A flush-mount template and hardware can be used to mount the
device in your dashboard.
September 2016 Printed in Taiwan 190-01835-12_0A
1Trim the template and make sure it fits in the location where
you want to mount the device.
2Secure the template to the selected mounting location.
3Using a 9.5 mm (3/8 in.) drill bit, drill one or more of the holes
inside the corners of the solid line on the template to prepare
the mounting surface for cutting.
4Using a jigsaw or rotary cutting tool, cut the mounting surface
along the inside of the solid line indicated on the template.
5Place the device into the cutout to test the fit.
6If necessary, use a file and sandpaper to refine the size of
the hole.
7NOTE: Not all devices have trim caps.
Using a pry tool such as a flat piece of plastic or a
screwdriver, carefully pry up the corners of the trim caps À
and slide the pry tool to the center
Á to remove the trim caps.
8Ensure the mounting holes on the device line up with the pilot
holes on the template.
9If the mounting holes on the device do not line up, mark the
new pilot-hole locations.
10 Using a 3.2 mm (1/8 in.) drill bit, drill the pilot holes.
11 Remove the template from the mounting surface.
12 If you will not have access to the back of the device after you
mount it, connect all necessary cables to the device before
placing it into the cutout.
NOTE: To prevent corrosion of the metal contacts, cover
unused connectors with weather caps.
13 Install the rubber gasket pieces on the back of the device.
The pieces of the rubber gasket have adhesive on the back.
Make sure you remove the protective liner before installing
them on the device.
14 Place the device into the cradle.
15 Securely connect each cable to a port on the cradle.
16 Place the locking bracket over the cables.
17 Place the device into the cutout.
18 Secure the device to the mounting surface using the included
screws.
19 Install the trim caps by snapping them in place around the
edges of the device.
Wiring Harness
• The wiring harness connects the device to power and NMEA
®
0183 devices.
• The device has one internal NMEA 0183 port that is used to
connect to NMEA 0183 compliant devices.
• If it is necessary to extend the power and ground wires, you
must use .82 mm2 (18 AWG) or larger wire.
• If it is necessary to extend the NMEA 0183 or alarm wires,
you must use .33 mm2 (22 AWG) wire.
Item Wire Function Wire Color
ÀNMEA 0183 internal port Rx (in) Brown
ÁNMEA 0183 internal port Tx (out) Blue
ÂGround (power and NMEA 0183) Black
ÃPower Red
Connecting the Wiring Harness to Power
1Route the wiring harness to the power source and to the
device.
2Connect the red wire to the positive (+) battery terminal, and
connect the black wire to the negative (-) battery terminal.
NMEA 0183 Connection Considerations
• The installation instructions provided with your NMEA 0183
compatible device should contain the information you need to
identify the transmitting (Tx) and receiving (Rx) A (+) and B
(-) wires.
NMEA 0183 Connection Diagram
+-
Item Description
À12 Vdc power source
ÁWiring harness
ÂNMEA 0183 compliant device
Item Garmin Wire
Function
Garmin Wire
Color
NMEA 0183 Device Wire
Function
ÊPower Red Power
ËGround Black Data ground
ÌTx/Rx Tx/Rx/B (-)
ÍTx Blue Rx/A (+)
ÎRx Brown Tx/A (+)
Installing the Cables and Connectors
Wiring to Power
1Route the power cable from the swivel mount to the boat
battery or fuse block.
2If necessary, extend the wires using .82 mm
2 (18 AWG) or
larger wire.
3Connect the red wire to the positive terminal on the battery or
fuse block, and connect the black wire to the negative
terminal.
2 echoMAP 70/90 Series Installation Instructions
Connecting the Device to a Transducer
NOTE: The device goes into simulator mode if the connection is
not secure between the device and transducer.
This chartplotter is compatible with the included Garmin
ClearVü™ transducer as well as a range of accessory
transducers including Garmin GT transducers, which are
available at . Go to or contact www.garmin.com www.garmin.com
your local Garmin dealer to determine the appropriate type of
transducer for your needs.
1Follow the instructions provided with your transducer to
correctly install it on your boat.
2Route the transducer cable to the back of your device, away
from sources of electrical interference.
3Connect the transducer cable to the appropriate port on your
device.
Connecting the Cables to the Cradle
The connectors on the cables are keyed to fit only in the correct
ports on the device or cradle. The connected cables are held in
place by a locking bracket.
1Remove the cable locking bracket from the cradle.
2Compare the divots À on each cable connector to the keying
on each port to determine which cable corresponds to each
port.
3Securely connect each cable to a port.
4Place the locking bracket Á over the cables and slide the
bracket down to lock the cables in place.
There is an audible click when the locking bracket is installed
correctly.
Installing the Device in the Cradle
If your device uses a cradle and you have connected the cables
to the cradle, you can quickly place the device in the cradle
without plugging in any cables.
1Place the base of the device in the bottom of the cradle.
2Tilt the device toward the cradle until it fastens in place.
There is an audible click when the device is secured in the
cradle.
Removing the Device from the Cradle
1Press the release lever À on the cradle until the device is
released.
2Tilt the device forward, and lift it out of the cradle.
Updating the Device Software
Before you can update the software, you must obtain a
software-update memory card or load the latest software onto a
memory card.
1Turn on the chartplotter.
2After the home screen appears, insert the memory card into
the card slot.
NOTE: In order for the software update instructions to
appear, the device must be fully booted before the card is
inserted.
3Follow the on-screen instructions.
4Wait several minutes while the software update process
completes.
The device returns to normal operation after the software
update process is complete.
5Remove the memory card.
NOTE: If the memory card is removed before the device
restarts fully, the software update is not complete.
Specifications
Device Specification Measurement
echoMAP 70 Dimensions (W x H x D) 25 x 13.9 x 5.1 cm (9.8 x 5.5 x
2 in.)
Display size (W x H) 15.2 x 9.1 cm (6.0 x 3.6 in.)
Weight 0.77 kg (1.7 lbs.)
Power input From 10 to 18 Vdc
Max. power usage 17 W
Compass-safe distance 65 cm (25.6 in.)
echoMAP 90 Dimensions (W x H x D) 28.8 x 16.3 x 5.1 cm (11.3 x 6.4
x 2 in.)
Display size (W x H) 19.8 x 11.2 cm (4.4 x 7.8 in.)
Weight 1 kg (2.3 lbs.)
Power input From 10 to 20 Vdc
Max. power usage 20 W
Compass-safe distance 55 cm (21.7 in.)
All Models Temperature range From -15 to 55°C (from 5 to
131°F)
Material Polycarbonate plastic
Water rating* IEC 60529 IPX7
Transmit power (RMS)** 500 W
echoMAP 70/90 Series Installation Instructions 3
Produktspezifikationen
| Marke: | Garmin |
| Kategorie: | Marine |
| Modell: | echoMAP 73dv |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Garmin echoMAP 73dv benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Marine Garmin
5 August 2024
7 Juli 2024
6 Juli 2024
6 Juli 2024
5 Juli 2024
5 Juli 2024
4 Juli 2024
4 Juli 2024
4 Juli 2024
3 Juli 2024
Bedienungsanleitung Marine
- Marine Humminbird
- Marine Kenwood
- Marine Silva
- Marine Furuno
- Marine Lowrance
- Marine Simrad
- Marine Icom
- Marine President
- Marine Rockford Fosgate
- Marine Klarfit
- Marine IVT
- Marine Navionics
- Marine Dickinson Marine
- Marine Digital Yacht
- Marine Eagle
- Marine Easy
- Marine Echotec
- Marine Efoy
- Marine Fastnet
- Marine Fusion
- Marine Geonav
- Marine Interphase
- Marine Katadyn
- Marine KVH
- Marine Lofrans
- Marine Lorenz
- Marine Nasa
- Marine Navico
- Marine Nordwest-funk
- Marine Plastimo
- Marine Polmar
- Marine Raymarine
- Marine Raytheon
- Marine Sailtron
- Marine SEAFARER
- Marine Standard Horizon
- Marine WEST SYSTEM
- Marine AdvanSea
- Marine Alphatron
- Marine BandG
Neueste Bedienungsanleitung für -Kategorien-
5 Oktober 2024
24 September 2024
22 September 2024
21 September 2024
18 September 2024
27 August 2024
27 August 2024
27 August 2024
27 August 2024
26 August 2024