Garett Kids Sun Pro 4G Bedienungsanleitung

Garett Smartwatch Kids Sun Pro 4G

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Garett Kids Sun Pro 4G (2 Seiten) in der Kategorie Smartwatch. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
Garett
Kids Sun Pro 4G
User manual
Thank you for purchasing Kids Sun Pro 4G
SAFETY ISSUES
Please read this manual carefully before use and keep it for future
reference. T he manufacturer shall bear no liability for any damage/injuries
caused by improper use. Depending on the smartwatch batch, certain
functions may differ from the functions described in this user manual.
Using this device near medical devices may disrupt their operation. Users
should pay particular attention when using the smartwatch near medical
devices such as pacemakers, hearing aids, and other electronic medical
devices.
Do not dispose of the device in fire. There is a risk of the batteries exploding
and the resulting threat to life and health.
Protect the device from heat sources and direct sunlight.
Do not store the device in damp places or at high temperatures, as this
may cause electric shock or fire.
The device is not resistant to prolonged immersion in water.
Do not swim or dive while wearing the device.
In case of damage/failure, please stop using the product and contact
the Garett service centre. Attempting to repair it yourself may damage
the device and void the warranty.
Clean the device only with a soft, slightly damp cloth. Do not use strong
detergents or any other stimulants to clean the product.
Do not swim while wearing the device. The IP67 standard does
not guarantee that the smartwatch will be waterproof while
swimming. The forces acting on the device while swimming may
cause it to become unsealed and damaged.
1
2
Touchscreen display
1
2
3
4
5
Nano SIM card slot
Touch back button
Photo/video camera
Torch
PRODUCT DESCRIPTION
6
Measuring sensor set
3
4
7
Function button (On/Off/Wake/Lock screen/SOS)
- 2 - - 3 - - 4 - - 5 -
INSTALLATION
Put the watch on your wrist and adjust the strap length so that the device
strap is not too loose.
NANO SIM CARD REQUIREMENTS
1. Nano SIMThe device requires the installation of a card.
2. mustThe SIM card meet the following requirements:
• must be activeThe card (if it is a new card, you will need to activate it on
a mobile phone by making an outgoing call),
• must be topped upThe card (applies to prepaid cards),
• must not have an active PIN codeThe card (to check whether the card
has an active PIN blockade, you must install it in your mobile phone and
check whether a PIN code is required when starting the phone. If so, the
PIN lock is active and will need to be disabled in the phone settings or by
contacting the operator),
• must support 2G/3G/4G operating modes have InternetThe card ,
service enabled have a Number Identification function, and .
SIM cards offered by operators as data-only, e.g. those designed
for tablets, may not function properly in the device.
Since the device uses an internet connection, we recommend purchasing
an internet package from the operator to avoid additional costs. A 1
GB/month package is sufficient. The fees for internet connection, voice
calls and text messages are specified in the price list of your mobile
operator.
INSTALLING THE NANO SIM CARD
1. First, remove the screws securing the Nano
SIM(2) card port cover located on the left side of the
watch.
2. Remove the cap and then place the card in the
port, inserting it according to the illustrative
diagram in the picture, i.e., with the card chip
towards the display and the notched corner of
the card towards the slot.
3. A properly installed SIM card will make a
distinctive "click" sound. Gently push it towards
the slot to the card until you hear a remove "click" .
The mechanism will eject the SIM automatically
card.
4. Replace and screw on the cover, taking care to
ensure the correct fit and location.
STANDARD
SIM
MICRO
SIM
NANO
SIM
V
Install the SIM card when the
device is turned off.
Turning on/off
Press and hold the for approximately function key(7) 3 seconds
to start the device. To switch it off, go to Settings>Off.
If the smartwatch does not start, try charging it.
After starting
The smartwatch is operated via the and a screen touch button,
as well as a .function button
OPERATION
Changing the watch face
Touch and hold the home screen to display the smartwatch face
change menu Swipe right/left. to select the face, and then click
anywhere on the screen to confirm your selection.
Navigation
Swipe right main menuon the home screen to access the . Touch
the screen to enter the selected function. After entering a
function, swiping to the right or tapping the touch return key(3)
allows you to return to the previous screen while pressing the
function key(7) takes you to the main screen.
Swipe left App Market on the home screen to access the , a menu
for installing additional apps on your smartwatch.
Swipe down on the home screen or the menu to access the
settings bar. Allows you to view selected functions of the
smartwatch, and if you swipe to the right, view recent
notifications.
Swipe up on the home screen or menu to access the settings
menu. Allows you to view and quickly change selected
smartwatch functions.
- 6 -
If there is no animation, make sure the watch is connected correctly.
When the battery has completely run out, the animation may take 10-20
minutes to appear. It is recommended to charge your smartwatch for
about 2 hours before turning it on for the first time.
The charging voltage should not exceed 5V.
The recommended maximum charging current is 1A.
CHARGING
1. The smartwatch charges using the included with the magnetic cable
device.
2. Attach the end of the magnetic cable so that the contacts of the watch
touch the contacts of the charging cable. Then connect the other end of
the cable to the USB port of a computer or a USB power adapter. When it is
connected properly, the charging animation will appear on the watch
screen.
3. Wait until you see ) and GSM coverage (icon - internet connection
(highlighted icon - ) They are necessary for further configuration of the
device. After a minute, and if these values do not appear, make sure that the
SIM card meets all the requirements described above the watch and that
is in a place where it can establish network contact. You should also turn
off ( ) and restart the watch. If you have and Settings>Turn off GSM coverage
still no is available ( ), this could internet connection no icon illuminated
mean that the is not configured correctly, which is done through the APN
watch settings, described further in the section. TROUBLESHOOTING
4. When the internet connection is active, proceed to the next step, i.e.
installing the Garett Tracker app on your phone. The main menu of the
smartwatch is described later in the manual. The device will be fully
functional after of the watch via the registration configurationand Garett
Tracker app.
INSTALLING THE GARETT TRACKER APP
The smartwatch works with your smartphone using the app. Garett Tracker
Before use, you must first download the app from the Google Play Store or
the AppStore and install it on your phone. You can find the app by entering
the name " " in the store search engine or scanning the Garett Tracker
corresponding QR code provided below.
iOSAndroid
Video tutorial – Garett Tracker
How do you use the Garett Tracker app?
If you want to learn more about configuring the device via the Garett
Tracker app, we recommend checking out this video – scan the QR code
or . use the link
https://youtu.be/1VJjvs1raaA
Please remember to grant the app the required consent and
permission before registration to work correctly. If you refuse,
selected functions of the app may not work properly or will be
unavailable.
5.Then enter the verification code from
the image generated on the right.
6.In the last field, enter your password
which, together with the e-mail address,
will be used to log in to the app. The
password may consist of 6-12 characters.
Polish characters and special characters
are not allowed.
7.After filling in all the details, click
Registration.
8.T hen press the button to Add Device
add the watch to the previously created
account.
9.On the next screen, scan the QR code
using the button from the sticker on
the back of the watch ( ) or inREG CODE
GARETT TRACKER APP
After completing the registration and , the adding the device home screen
of the app will be displayed, showing the map with the last watch location.
The bubble over the pin specifying the location displays the source of location
data ( and GPS/LBS/WiFi address), , time of the last location watch battery
level.
NOTE: When using any function of the
Garett Tracker app or trying to
configure the settings, the following
message may appear: "The device is
offline". This means that the
smartwatch has no active internet
connection or is out of network range.
Check whether your SIM card is
properly installed and meets all the
requirements described earlier in the
manual. If the SIM card is properly
installed and meets the criteria
described, the lack of signal may be due
to an incorrect APN configuration. The
way to get the proper APN
configuration is described later in the
manual in the TROUBLESHOOTING
section.
- 7 - - 8 - - 9 - - 10 - - 11 - - 12 - - 13 - - 14 -
To define the area, and then select any location on the map – click +
this will be the . Enter the name and radius of centre of the geofence
the area ( ).max. 2 km
- Locate: Clicking on this icon refreshes the data on the current
location of the watch.
- History: Displays the route travelled by the user of the watch from the
previous days.
- Pop-up menu: T he ability to display and configure selected watch
functions:
- Whitelist: Incoming call filtering – it means that only the numbers
on the Whitelist and that have been previously saved in the phone
book will be able to get through to the watch.
- Timetable: Configure the timetable that can be displayed on the
watch under Learning>Timetable.
- Remote camera: T ake a photo using the watch camera and send it
to the app.
- Activity: Configuration and display of the activities performed by
the watch user, up to several days back.
- Video chat: The ability to make video calls between the
administrator and the associated watch.
Due to the large amount of data transmitted during a video call,
a high-bandwidth internet connection is required. LTE
connection is recommended. In locations with poor mobile
network coverage, such as areas outside cities or towns,
shopping malls or underground car parks, making video calls
may not be possible, or the calls may be of poor quality with
interruptions in video transmission.
- Device lock The ability to restrict the functionalities of the
watch to SOS calls only.
- Alarms: View and configure the alarms active on the device
( ).max. 3
- Notifications: History of recent notifications, e.g. SOS calls, low
battery.
- Rewards: Reward system – each reward is one heart. The total
number of rewards is displayed on the home screen of the watch.
- Personal details: The ability to display and configure the user details:
- Profile: Configure the personal details of the account
administrator.
- Device list: The ability to display
and add/edit associated devices.
By clicking on a device name,
you can change its details.
The option allows you to Switch
switch the active device, i.e. the
one being currently tracked.
To remove a watch from the list,
select Edit>Delete.
- Change password: Change the
password used in the app.
- Log out: Log out of the app.
- Change map view: The ability to change the map style.
- Phone location: Indicates the current location of the phone on which
the app is launched.
- Device location: Indicates on the map the location of all associated
devices in the app.
- Switch: Quickly switch between associated devices.
- Settings: The ability to display and configure the functions:
- SOS numbers: Configure SOS
numbers ( ). Pressing and max. 3
holding the SOS button on the
watch will call the first number.
If the call is unsuccessful, the
watch will automatically dial the
second and then the third
number. If the SOS call is
answered by the voicemail
active on one of the SOS
numbers, it will not be redirected to the next number.
Magnetic charging port
Interchangeable strap
8
9
9
8
7
5
6
4G
4G
4G
INITIAL START-UP
1. When the Nano SIM card is installed correctly in the watch and meets all
the requirements described above, start the device by pressing and holding
the function button(7) for approximately 3 seconds.
2. After starting the watch, the home screen will appear, displaying the time
and date. on the main screen or menu will display: Swiping down the
internet connection GSM coverage WiFi signal and battery level, , , .
- internet connection
- GSM coverage
- Wi-Fi coverage
- battery level
69%
REGISTERING IN THE APP
1. Garett T racker Launch the app.
2.When you launch the app, you'll see a where you can log in to login screen
your account (if you've already created one), register a new account, or
change the app's language.
3.To register a new account, click Registration.
4.In the first field, enter your address that will serve as your e-mail login to
the app.
Please remember or note down
the e-mail address and password
used to register the watch,
because the account to which
the device was first assigned is
the administrator's account.
Re-registration will be possible
only after obtaining permission
f rom the administrator or after
contacting our T echnical Support
Department: serwis@garett.pl
13. OKAfter filling in all the details, click ,
and the device and Garett Tracker app
will be fully functional.
To ensure the most accurate location, the smartwatch must be in
an open area, in order to have an accurate and stable GPS signal.
When there is no GPS signal, e.g. because it is inside a building,
the location is determined based on the nearest mobile network
transmitter. In this case, the indicated position of the device may
differ from its physical location.
- Chat: The ability to send short voice
messages ( ), shortmax. 15 seconds
text messages ( ) max. 30 characters
and photos to the watch
- GEO-fence: This function lets you
define the area in which the watch
user may move around. The app will
inform you when the user crosses
the geofence.
www.garett.eu
EN
the watch settings. The code can be also entered manually.
10.Enter the , and it will be displayed as the name of the device device name
associated with your account.
11. relationshipThe next step is to choose your with the user of the
smartwatch.
12.Optionally, enter the phone number of the device, which will facilitate
communication.
In the event of any problems with registration of the device,
please contact our Technical Support Department:
serwis@garett.pl
When configuring the SOS Numbers function – and Voice
monitor – enter the numbers without the country code (if
necessary, add 0048 before the number for PL). Using the "+"
symbol may prevent calls from being made.
depending on the . Click temperature of the measured objects
Reset to reset the results Exit to exit T he measurement or .
results are not stored in the watch memory or transferred to the
Garett T racker application.
- Health: Pulse BloodFunction for measuring health parameters ( ,
Pressure Blood Oxygen begin the measurement, ). Click START to .
The values for all 3 health functions are measured
simultaneously. The result will be displayed on the watch screen
and stored in the Garett Tracker Activity>Blood app under
Pressure/Pulse when the measurement is complete.
in the list view as soon as you select the SMS function.
- Chat: Voice/text messaging function. Displays recent voice notes
and sent from the app to the recent text messages Garett T racker
watch. It is possible to send a voice message f rom the watch. To
send press and hold dictating a voice memo, while a message
( ). the message to the max. 15 seconds Release the button to send
watch administrator. It will appear in the Garett Tracker app under
the tab. Using the button, the user :Chat can send
* emoticon,
* photo taken with camera,
* photo selected from the watch gallery.
Clicking start a video call.will
- Call history: Call history function. The possibility of displaying the
exact date and time of the last voice calls.
- Video call: Video calls function. Possibility of making video calls
between the administrator and the associated watch. Group chat
also available. Select a person and to start. You can confirm the call
terminate the call by pressing the red phone icon function or the
button(7). Incoming calls are answered with the green phone icon
and similarly rejected with the or the .red function key
Due to the large amount of data transferred during a video call, a
high-speed internet connection is required, so an LTE or WiFi
connection is recommended. For locations with poor mobile
network coverage, such as out-of-town areas, shopping malls or
underground car parks, it may not be possible to make a video
call or it will be of poor quality with interruptions in video
transmission.
- Camera: Camera function. Take photos with the watch's built-in
camera. To take a photo, click . The photo will be saved in the
device's gallery send. It is possible to a photo to the watch
administrator from the Smartwatch - , then select a Gallery click
photo from the gallery and down to . It will appear in hold it send
the app under the tab.Garett T racker Remote Camera
- Watch finder: T he ability to
search for your watch – this
function triggers an audible
alarm.
- Turn off watch: Turn off the
watch remotely.
- Restart watch: Restart the
smartwatch.
- Restore factory settings: The
ability to reset the watch to
factory settings.
- Delete account: Send a request
to delete the account from the
app server. The account should
be deleted within one hour.
Log out: Log out of the app.
The SOS function is active only when the watch is within range of
the network, has an internet connection, and the account is
sufficiently topped up.
- Voice monitoring: Remote voice monitoring. Enter a phone
number to activate the function. The watch will automatically call
back the phone number entered within 30 seconds. The watch
- Night-time battery saving mode: Ability to activate/deactivate the
battery saving mode, which limits the network functions of the
watch between 22:00 and 6:00 (extends the operating time of the
watch).
- SMS messages: The ability to read SMS messages sent to the
number on the watch.
- Body temperature: Ability to perform a remote temperature
measurement (automatic or unitary - at a set time), display the
measurement history change the temperature unit or .
Additionally, the administrator will receive an when SMS message
the measured temperature value exceeds the set range with the
SMS notification function.
- Operating modes: Select the refresh frequency of the watch
location:
* Tracking mode - refreshing every 1 minute (shortens the running
time of the watch),
* Normal mode - refresh every 10 minutes,
* Battery saving mode - refreshes every hour,
* Sleep mode - manual positioning.
- SMS notifications: On/Off and
configuration of SMS
notifications to the specified
phone number.
- Family members: List of
administrators who can manage
the watch.
- Phone book: The ability to add
contacts, which will be displayed
in the phone book of the watch.
- Wi-Fi settings: Configure the
Wi-Fi network that the watch
connects to automatically,
without entering a password.
- Time zone: Configure the time zone of the watch
(PL: East: GMT +1:00).
- Language: The option to change the language of the smartwatch.
- Management:
* Numeric keypad: Enable/disable the numeric keypad function on
the watch. Turning on this function allows the watch user to dial
and make a call to any number (including those not entered in the
phone book). If you do not want the watch user to be able to
contact numbers not entered in the phone book, turn this
function off.
* GPS positioning: Option to enable/disable the watch's positioning
function via GPS.
- Power plan: Schedule your watch to turn on or off.
- LBS: T he ability to turn on/off the tracking function of the watch
based on the nearest mobile network transmitter, in the event that
the watch loses GPS signal.
Depending on your device model, the above-described functions
of the Garett Tracker application may vary. In case of any
problems, don't hesitate to contact our Technical Support
Department: serwis@garett.pl
- 15 - - 16 - - 17 - - 18 - - 19 - - 20 - - 21 -
TECHNICAL SPECIFICATIONS
GSM module:
2G / 3G / 4G
Processor:
SL8521E
Battery:
800 mAh
Display:
IPS 1,3″
Face dimensions:
47 x 41 x 15,7 mm
Water resistance:
IP67
Dedicated app:
Garett Tracker
Warranty:
24 months
Interchangeable strap
Weight:
max. 58 g
More information about this device is available at www.garett.pl. Visit our
website to see more products and accessories.
- 24 - - 25 -- 22 - - 23 -
Depending on the software version of your device, the
smartwatch functions described above may vary. In the event of
any problems, don't hesitate to contact our Technical Support
Department: serwis@garett.pl
Once you have received the correct answer, move on to APN settings:
Step 1: Go to APN settings:
Settings > Mobile networks > APN
Step 2: internetOnce in the APN settings, select the first item described as
and then the option.Edit
Step 3: EditBy selecting on the watch screen, you will see a list of the
device's . Depending on the operator of the SIM card in the APN settings
watch, set them according to the instructions below (the change applies
only to the values described below, the others unchanged):
Operator APN Name Password
internet
virgin-internet
plus
internet
leave 'not set'
leave 'not set'
leave 'not set'
internet
leave 'not set'
leave 'not set'
leave 'not set'
internet
5. Calling the watch is impossible – busy signal or user unavailable:
* is topped upCheck whether the number you are calling from ,
* s blockedCheck that neither your number nor the number on the watch i
or restricted,
* Whitelist option is turned on if your number is notCheck whether the (
saved in the phone book and the Whitelist is on, the watch will reject
the call).
6. Calling f rom the watch is impossible:
* GSM signal icon – Check whether the watch has a ( ),
* meets all the requirementsCheck whether the SIM card (described at the
beginning of the manual).
* numeric keypad function is turned on that there areCheck that the or
contacts saved in the phone book of the watch.
7. During calls, you cannot hear the other person in the smartwatch
speaker:
* Check that the speaker on the watch (you can has not been muted adjust
the sound volume in the watch settings).
8. Short battery life:
* the watch charging time was not too shortCheck that (the
recommended charging time is ),approx. 2 hours
* Normal modeCheck the current operating mode on the device ( or
Battery saving mode are the recommended options).
- Phone: Numeric keypad function. Allows you to dial any number
( ) using the keypad and even outside the phonebook make a call -
button can be deactivated via the Garett . The Phone function
Tracker application Management>Numeric keypad under .
MAIN MENU
- Contacts: Phonebook function. View contacts previously saved via
the application. or Garett T racker Select a number from the list
click enter the number start a call terminate , to and . You can the
call by pressing or the . the red phone icon function button(7)
Incoming calls are with the and answered green phone icon
similarly rejected with the red function key or the . Activating the
numerical keypad clicking on during the call is possible by .
- Settings:
* Mobile networks: Configure network settings (VoLTE, APN, data
roaming),
* WiFi: WiFi settings,
* Bluetooth: Bluetooth settings (Bluetooth headphones can be
paired),
* Lock: Smartwatch lock settings,
* Volume: Adjust the volume of the watch (multimedia, alarm clock,
ringtone),
* Ringtone: Ringtone settings for notifications and incoming calls,
* Brightness: Adjusts the brightness level of the display,
* Torch: Torch function in the watch,
* Menu style: Change the style of the main menu,
* Theme: Change the theme (background) of the main menu,
* Sleep: Configuration of screen blanking time (from 5 seconds to 30
minutes),
* Restart: Restart your watch,
* Turn off: Turn off the device,
* Tools: Additional functions for managing the device memory
(clearing and viewing data on the watch),
* More: Device information (water removal, device information, SIM
lock settings, date/time and language settings).
- SMS: SMS function. Allows you to send/receive SMS messages.
Tap , to start creating a . Enter your new message phone number
or and select a from the click previously saved contact Garett
Tracker application the first field second field in . In the , enter the
content of the message you want to forward. Press the return
touch button(3) exit the keyboard view Click to when finished. ,
to send your message Messages sent/received will be available.
- Gallery: The watch's gallery function. Possibility of viewing, deleting
and sending photos. To delete, . To and press send, press hold the
photo, then give permission for the photo to be transferred. It will
appear in the Garett Tracker Remote Cameraapp under the tab.
- Learning:
* Game: A simple maths game.
* Timetable: GarettAbility to view a pre-configured timetable in the
Tracker app.
- Pedometer: Pedometer function. Displays the number of steps you
have taken. Option to enable/disable Garett this function in the
Tracker app under .Activity>Pedometer>Measurement
- App Store: Ability to install additional features on the watch.
- QR Code: REG CODE QR code to download theDisplays the and
Garett T racker app.
- Alarm: Possibility of viewing a pre-configured alarm clock in the
Garett Tracker app.
- Stopwatch: Stopwatch function.
- Lock:
* Screen lock: PIN code password Possibility of adding a or as a
screen lock. Enter your PIN/password repeat it confirm, , and then
to add a new lock. The entered data will be required each time you
try to unlock your watch. This function protects against
unauthorised access to the smartwatch - Level I.
* FaceUnlock: Face unlock function + PIN/password. Enter the
PIN/password to activate the function repeat confirm, and . Then
scan your face it appears automatically in the add face menu (
after entering and confirming your PIN/password). Hold the
watch in according to the messages front of your face and move it
displayed on the smartwatch until the scanning is complete
( ). The image of the scanned face will be used to unlock the 100%
screen. This function protects against unauthorised access to the
smartwatch - Level II.
FaceUnlock enhanced can be with an additional feature -
EyeUnlock single eye blink It . It is an unlocking function using a .
prevents unlocking using e.g. a photo. To activate the feature, go to
FaceUnlock settings EyeUnlock no need to scan your and select (
face again). Once approved, unlocking the screen using your face
will only be possible after blinking your eyes. This function protects
against unauthorised access to the smartwatch - Level III.
- Music: Start/Stop NextMusic player function. Controlled: - , - ,
- . . Using , you can Back Press to display a list of all songs
perform the following actions:
* Share: Send a song to another device using a Bluetooth
connection,
* Set as ringer: Set the song as the incoming call sound,
* Delete: Deletes the selected song,
* Repeat: Loop playback of one or more songs,
* Random: Play all songs on the smartwatch randomly.
- Video: Watch video gallery function. Possibility of viewing deleting
and uploading videos. Select a video to . , to start playing Click
send to the watch administrator send via Bluetooth, click , to .
- Dictaphone: Voice recorder function. ,Press to start recording
then , to or .pause stop
- Camcorder: Camera function. Record video with the watch's built-in
camera. To , . The video will be saved in the start recording click
device gallery (Video).
- Thermometer: Thermometer function. Allows you to take
temperature measurements, and change the unit view recent
measurements Two modes. are available:
* Wrist: Start start Click to a quick measurement of your current
body temperature. When the , you will measurement is complete
hear a ; the result will be displayed on the watch screen (beep also
available under the History button Garett ) and saved in the
Tracker app under .Settings>Body Temperature
* Real-time measurement: Automatic continuous measurement
function. The temperature reading will change constantly
Step 4: In order to approve the changes, complete the APN configuration by
clicking on the word in the left bottom corner and then on the Options
bottom panel on the icon.Save
4. Inaccurate GPS location:
* GPS signal icon – Check whether the watch has a ( ),
* if the watch loses GPS signal, e.g.The watch must be in an open area (
because it is inside a building, the location is determined based on the
nearest mobile network transmitter).
- 26 - - 27 -
TROUBLESHOOTING
1. The device does not turn on:
* Connect the device to a wall charger for ,approx. 2 hours
* are workingCheck whether the charging cable and charger ,
* is properly connectedCheck whether the device .
2. No GSM signal (icon – ):
* SIM card format is correctCheck whether the ,
* is inserted properly in the slotCheck whether the SIM card (as specified
at the beginning of the manual),
* SIM card meets all the requirementsCheck whether the (described at
the beginning of the manual).
* Turn the device off on again and ,
* Check whether the watch works .with another SIM card
3. No internet connection (no icon – or the following message in the
Garett T racker app: "The device is offline"):
* SIM card meets all the requirementsCheck whether the (described at
the beginning of the manual).
* APN configurationEnter the :
Send a from any mobile phone to the number on the watch text message
(the SIM card must be inserted and the watch must be on; the message
is case-sensitive):
Content of the first text message:
pw,123456,ts#
After a while, you should receive a response to your phone containing
detailed information about the watch, i.e. the software version, ID, IMEI, IP
address and other information. For the watch to work properly, the ip_url
field must contain:
ip_url:52.28.132.157; port:8001;
If the ip_url field differs from the example provided, please
contact our Technical Support Department: serwis@garett.pl
WARRANTY/CLAIMS
The product is covered by a 24-month manufacturer's warranty. The warranty
does not cover: defects and damage caused by the user or as a result of
improper use (misuse), mechanical damage and damage resulting from
using accessories and/or consumables other than those provided with the
device. When lodging a complaint, fill in the warranty card supplied with the
device and send the device accompanied with proof of purchase to the
address of the service centre provided on the warranty card.
Contact details are available on the website:
www.garett.eu
Manufacturer:
GARETT sp. z o.o.
Targowa 18/1413
25 - 520 Kielce
www.garett.eu
As indicated by the marking on the product or in the related content, the
device should not be disposed of with other household waste after the end of
its service life. To avoid harm to the environment and human health as a
result of uncontrolled waste disposal, please separate the product from other
types of waste and recycle responsibly in order to promote reuse of material
resources as a regular practice. For information about where and how to
recycle this product in a way that is safe for the environment, household users
should contact the retail outlet at which they purchased the product, or local
authorities. Business users should contact their supplier and check the terms
of the purchase agreement. Do not dispose of the product with other
commercial waste.
Proper disposal of the
product (waste electric
and electronic equipment)
Made in P.R.C.
v. 1/22
Find us on:
www.garett.eu
In the event of any problems with using the device, we encourage
you to visit the Technical Support section on our website (scan
the QR code/use the link) or contact the Technical Support
Department: serwis@garett.pl
https://garett.com.pl/pl/i/Pomoc-techniczna/145

Produktspezifikationen

Marke: Garett
Kategorie: Smartwatch
Modell: Kids Sun Pro 4G

Brauchst du Hilfe?

Wenn Sie Hilfe mit Garett Kids Sun Pro 4G benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Smartwatch Garett

Garett

Garett Kids Sun Pro 4G Bedienungsanleitung

15 Juli 2024

Bedienungsanleitung Smartwatch

Neueste Bedienungsanleitung für -Kategorien-

Bauhn

Bauhn ADMSW-0424-S Bedienungsanleitung

15 Oktober 2024
Bauhn

Bauhn AFTWS-0824 Bedienungsanleitung

15 Oktober 2024
Bauhn

Bauhn ADMSW-0424-R Bedienungsanleitung

15 Oktober 2024
Garmin

Garmin Fenix 8 Bedienungsanleitung

3 Oktober 2024
Blaupunkt

Blaupunkt BLP5200 Bedienungsanleitung

3 Oktober 2024
Garmin

Garmin Vivofit 3 XL Bedienungsanleitung

1 Oktober 2024
MyPhone

MyPhone Watch Tool Bedienungsanleitung

30 September 2024
Kogan

Kogan KAAP2WTCNVA Bedienungsanleitung

27 September 2024
Kogan

Kogan KAAP3WTCTPA Bedienungsanleitung

27 September 2024
Valante

Valante Smartwatch S2+ Bedienungsanleitung

23 September 2024