Gant Cameron 1089 Bedienungsanleitung

Gant betrachten Cameron 1089

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Gant Cameron 1089 (1 Seiten) in der Kategorie betrachten. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/1
This documenT is providedas is” w iT houT represen TaTion or war ranT y of any k in d eiT her e xpress or implied.
SpecificationS
Gant id no: 1089
MoveMent no: 0S21
Battery: SR927W
diSpLayS and BUttonS
SettinG tHe tiMe
1. Pull the crown out to position 2.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,
the hands begin to run.
SettinG tHe date
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.*
* If the date is set between the hours of around 9:00 PM and 1:00 AM,
the date may not change on the following day.
3. After the date has been set, push the crown back to the
normal position.
USinG tHe cHronoGrapH
This chronograph is able to measure and display time in 1/1
second units up to a maximum of 59 minutes and 59 seconds.
The chronograph second hand keeps going continuously for
59 minutes 59 seconds after starting the measurement.
MeaSUrinG tiMe witH tHe cHronoGrapH
1. The chronograph can be started and stopped each time
button a is pressed.
2. Pressing button B resets the chronograph and the
chronograph second hand and chronograph minute
hand returns to zero position.
cHronoGrapH reSet
(incL. after repLacinG Battery)
This procedure shoud be performed when the chronograph
second hand does not return to zero position after the
chronograph has been reset, and including after the battery
has been replaced.
1. Pull the crown out to position 2.
2. Press button a to set the chronograph second hand to
the zero position. The chronograph hand can be advanced
rapidly by continuously pressing button a.
3. Once the hand have been zeroed, return the crown to
the normal position.
* Do not push crown to normal position while the chronograph second hand
returns to zero position. It stops on the way when crown is returned to
normal position and its position is recognized as zero position.
c a M e r o n
US er i n S t r U c t i o n S
CROWN
BUTTON A
BUTTON B
24 HOUR HAND
DATE
CHRONOGRAPH
SECOND HAND
1 2
CHRONOGRAPH
MINUTE HAND


Produktspezifikationen

Marke: Gant
Kategorie: betrachten
Modell: Cameron 1089

Brauchst du Hilfe?

Wenn Sie Hilfe mit Gant Cameron 1089 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung betrachten Gant

Bedienungsanleitung betrachten

Neueste Bedienungsanleitung für -Kategorien-