Furuno BBWX2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Furuno BBWX2 (15 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 29 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/15
U.S.A.
INSTALLATION GUIDE
BBWX2
SATELLITE RECEIVER/SWITCH
WX2-012-551
www.furunousa.com
Please place the ESN sticker provided in the box below
This ESN number is required to activate SIRIUS weather and audio services.
Sirius Weather Receiver
P/N: BBWX2
ESN: 012345678912
U.S.A
.
Made in China
S/N: 12345MMDDYYNNNN
U.S.A
.
BBWX2 INSTALLATION GUIDE
Page 2 of 15
Do not open the enclosure
unless totally familiar
with electrical circuits.
Only qualified personnel
should work inside the
equipment.
Observe the following compass safe
distances to prevent interference to a
magnetic compass:
Standard
Compass
Steering
Compass
BBWX2 0.8m 0.5m
Do not install the unit where it may get
wet from rain or water splash.
Water in the unit can result in fire,
electrical shock or damage the equipment.
Use only the specific power cable.
Fire or damage to the equipment can
result if a different cable is used.
Do not disassemble or modify the
equipment.
Fire, electrical shock or serious injury can
result.
U.S.A
.
BBWX2 INSTALLATION GUIDE
Page 3 of 15
Table of Contents
1.0 Preface ....................................................................................................... 4
1.1 Disclaimer ................................................................................................ 4
2.0 Introduction ............................................................................................... 5
2.1 System Configuration ............................................................................. 5
2.2 Receiver/Switch Specifications ............................................................... 6
2.3 Equipment List ........................................................................................ 6
3.0 BBWX2 Installation ................................................................................... 7
3.1 Mounting Considerations ......................................................................... 7
3.2 Mounting the Antenna ............................................................................. 8
3.3 Cabling .................................................................................................... 8
3.4 Turning Power ON, LED function .......................................................... 10
4.0 Sirius Activation ..................................................................................... 11
5.0 BBWX2 Operation ................................................................................... 12
5.1 Connecting to and configuring the NavNet 3D MFD (display) ............... 12
5.2 Connecting to and configuring the NavNet vx2 (display) ....................... 13
5.3 Power synchronization .......................................................................... 14
5.4 Troubleshooting ..................................................................................... 15
5.4 General Maintenance ............................................................................ 15


Produktspezifikationen

Marke: Furuno
Kategorie: Nicht kategorisiert
Modell: BBWX2

Brauchst du Hilfe?

Wenn Sie Hilfe mit Furuno BBWX2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Furuno

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-