Foster 2945 000 Bedienungsanleitung

Foster SpĆ¼lmaschine 2945 000

Lesen Sie kostenlos die šŸ“– deutsche Bedienungsanleitung fĆ¼r Foster 2945 000 (2 Seiten) in der Kategorie SpĆ¼lmaschine. Dieser Bedienungsanleitung war fĆ¼r 18 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/2
QUICK REFERENCE GUIDE GB
Programme Table
Programme number 1 2 3 4 Reference* 5 6 7 8
Programme name
Cleaning temperature
Degree of Soiling Suitable for
removing the
remnants on the
soiled dishes that
will be kept waiting
in the machine for a
few days, and thus,
for preventing the
bad odor buildup.
Suitable for lightly
soiled daily dishes
that are scraped or
pre-cleaned.
Suitable for dishes
that are not pre-
cleaned but washed
immediately.
Most economical
washing program for
the medium soiled
daily dishes that are
kept waiting.
Daily washing program at
which the medium soiled
dishes that are kept
waiting are cleaned in the
fastest way.
Suitable for heavily soiled
dishes, pots and pans.
Suitable for the dishes
which require extra
hygiene such as articles
for babies. Also suitable
for heavily soiled dishes.
Determines the soiling
degree of the dishes and
sets the temperature
and amount of the
washing water as well
as the washing time
automatically. Suitable for
all types of dishes.
- Few Few Medium Medium High High Medium to high
Detergents
A=25 cmĀ³/15 cmĀ³ B=5 cmĀ³ - A A A+B A+B A+B A+B A
Programme sequence
(without options)
Pre-wash
ā–¼
End
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
End
Pre-wash
ā–¼
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
Pre-wash
ā–¼
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
Pre-wash
ā–¼
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
Pre-wash
ā–¼
Wash
ā–¼
Cold rinse
ā–¼
Hot Rinse
ā–¼
Hot Rinse
ā–¼
Dry
ā–¼
End
The programme
sequence is adjusted to
the amount of soiling
Duration (min) 15 30 71 155 60 136 124 78-156
Water (I) 4 10,2 13,2 13 10,2 14,8 17,8 10,4-14,0
Energy (kWh) - 0,75 0,9 1,09 1,24 1,45 1,97 0,90-1,45
Left-on mode / Off mode (W) *** 0.85 / 0.09
The consumption values shown in the table were determined under standard conditions. Differences may therefore occur under practical conditions.
* Reference programme for testing institutes The tests in accordance with EN 50242 must be carried out with a full water softener salt dispenser and a full rinse aid reservoir, and using the test programme. *** Power
consumption in off-mode and left-on mode are measured according to EN 62301.
ļæ½
! Attention: Please read the operating manual prior to operating the machine for the first time.
Starting your machine
Open the tap.ā€¢ī€€
Plug in to the socket.ā€¢ī€€
Open the door of the dishwasher.ā€¢ī€€
Place the dishes in accordance with the instructions in the ā€¢ī€€
user manual.
Make sure that the upper and lower impellers rotate freely.ā€¢ī€€
Put sufficient amount of detergent in the detergent dispenser ā€¢ī€€
and close its lid.
Make sure that indicators on programme display are ā€¢ī€€
illuminated by pressing On / Off key.
Check if the Salt and Rinse Aid indicators light and add salt ā€¢ī€€
and / or rinse aid if needed.
Since different salt brands in the market have different particle
sizes and since the water hardness may vary, dissolution of
the salt in water may take a couple of hours. Therefore, Salt
Indicator remains on for a while after adding salt into the
machine.
You may use Half Load / Tablet Detergent Key and Time ā€¢ī€€
Delay key features as necessary.
Refer to "Table of Programme Data and Average ā€¢ī€€
Consumption Values" to select a suitable programme.
Select the desired programme with Programme Selection key.ā€¢ī€€
Press Start / Pause / Cancel key to start the programme.ā€¢ī€€
Pay attention not to open the door of the machine when it is
running. If you need to open the door, safety system will stop
your machine. There may be a rush of vapour when you open
the door of your machine; be careful. The programme will
resume running when you close the door.
When the programme you have selected comes to an end, an ā€¢ī€€
audible warning signal with intervals of 8 seconds will warn
you to turn off your machine. This audible signal will warn you
10 times before it turns off.
Open the door of the dishwasher.ā€¢ī€€
Press On / Off key to turn off your machine.ā€¢ī€€
Indicator lights on the programme display will turn off.ā€¢ī€€
Close the tap.ā€¢ī€€
Unplug the machine from the socket.ā€¢ī€€
Leave your dishes in the machine for about 15 minutes after
they are washed in order to have them cooled down. Your
dishes will dry in a shorter time if you leave the door of your
machine ajar during this period. This will increase the drying
effectiveness of your machine.
12
13
Half Load / Tablet
Detergent Key
Programme Selection Key
11 Programme Indicator
9
10
Remaining Time / Time delay
Indicator
Tablet Detergent Indicator
Half Load Indicator
Salt Indicator
On / Off Key
1
2
3
4Start / Pause / Cancel
Indicator
8Rinse Aid indicator
6
7
5
Time Delay Indicator
Start / Pause / Cancel Key
Time Delay Key
- 50Ā°C40Ā°C35Ā°C 60Ā°C 65Ā°C 70Ā°C 40Ā°C - 65Ā°C
Delicate AutoPre-wash 30 Min Eco 60min Daily Intensive
QUICK REFERENCE GUIDE GB
On / Off Key
When you press On / Off key, indicator lights illuminate on the
display for ON position. The lights turn off in OFF position.
Salt level indicator light
When this indicator light comes on, you must
refill special salt (If applicable).
In machines which do not possess an electrical
salt indicator, the salt content can be read on
the container for the salt. When the visual fill
indicator is dark, there is enough salt in the
container.
When the colour is light, open the container and add dishwasher
salt.
Rinse aid level indicator light
If this indicator light comes on, you have to refill
rinse aid (If applicable).
You can also tell whether rinse aid must be
refilled by looking at the rinse aid dispenser.
When the visual fill indicator is dark, there is
enough rinse aid in the dispenser.
When the colour is light, open the dispenser and
refill rinse aid.
Programme Selection Key
Refer to "Table of Programme Data and Average Consumption
Values" to select a programme suitable for your dishes.
Select the desired programme with programme selection key.
ī”
ī‚
ī
ī›
ī•
ī–
ī›
ī”
ī‚
ī
ī•
ī”
ī†
ī
Visual Indicator
Visual Indicator
17 7959 01 00_AC
Half Load / Tablet Detergent Key
Half Load / Tablet Detergent Key allows you to turn on and off the
Half Load and Tablet Detergent functions of your machine.
Half Load Function
If you want to run your machine without loading it completely, place
your dishes into the machine as you desire. Press On / Off key to
turn on your machine. Press the Half Load / Tablet Detergent key
after selecting the desired programme until Half Load Indicator
lights up, then press Start / Pause / Cancel key and close the door
of your machine. With the Half Load option you can use every part
of your lower and upper baskets and you can save from both water
and power.
Tablet Detergent Function
Depending on the hardness level of the tap water, the Tablet
Detergent function allows obtaining a better drying performance
from the multi-purpose detergents such as 2in1, 3in1, 4in1, 5in1,
etc., called as all-in-one detergents. Tablet Detergent Indicator
lights when the Tablet Detergent function is selected.
Salt and Rinse Aid indicators turn off when this function is activated.
Turn on your machine by pressing the On / Off key to use the Tablet
Detergent function. Press the Half Load / Tablet Detergent key after
selecting the desired programme until Half Load Indicator lights up,
then press Start / Pause / Cancel key and close the door of your
machine.
To use the Half Load and Tablet Detergent functions concurrently,
turn on your machine by pressing the On / Off key and then press
the Half Load / Tablet Detergent key until Half Load and Tablet
Detergent Indicators illuminate together.
If you have used the Half Load or Tablet Detergent features
during the last programme you used, Half Load or the Tablet
Detergent function will remain active in the next washing
programme you will select. If you do not want to use these
functions in the new programme you have selected, press
the Half Load / Tablet Detergent key until the indicator of the
relevant function turns off.
Changing Warning Sound Volume
Press and hold Half Load / Tablet Detergent key for 5 seconds until
S:03 appears on the display. Every time you press the Half Load /
Tablet Detergent key, the warning sound level will change as - - Off,
S:01 Low, S:02 Medium, and S:03 High. Turn off your machine
using the On / Off key to save it. Factory setting of your machine is
S:03.
Time Delay
Using the Time Delay key, you may delay the starting time of your
programme up to 9.5 hours with increments of 30 minutes. Press
Start / Pause / Cancel key after setting the Time Delay and close
the door of your machine. Once the time delay is over, the selected
programme will start automatically.
Start / Pause / Cancel Key
When you press the Start / Pause / Cancel key, the washing
programme you have selected will start.
(Start / Pause / Cancel indicator lights in Start mode, and turns off
in Pause mode)
To press the Start / Pause / Cancel key, wait for two seconds
after you turn on the machine by pressing the On / Off key.
Canceling a programme
Press and hold Start / Pause / Cancel key for 3 seconds. Release
the key as the Start / Pause / Cancel indicator starts flashing.
Once you close the door of your machine, draining is completed
in 2 minutes and the machine gives an audible warning when it is
completed.
There might be residues of detergent or rinse aid left in the
machine and / or on the pieces being washed depending on
the step the programme you have cancelled was in.
Changing a Programme
To change your selection after the programme has started:
1. Press Start / Pause / Cancel key to switch your machine in
pause mode.
2. Select the desired programme by pressing the Programme
Selection key.
3. Start the new programme by pressing Start / Pause / Cancel
key again.
The new programme will start from the step where the previous
one has stopped. For example, if the previous programme has
remained in drying step, new one will start from the drying step
as well.
If you want to run the new programme from the very beginning,
first you must cancel the current programme and then select a
new programme.

Produktspezifikationen

Marke: Foster
Kategorie: SpĆ¼lmaschine
Modell: 2945 000

Brauchst du Hilfe?

Wenn Sie Hilfe mit Foster 2945 000 benƶtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung SpĆ¼lmaschine Foster

Foster

Foster 2945 000 Bedienungsanleitung

29 August 2024

Bedienungsanleitung SpĆ¼lmaschine

Neueste Bedienungsanleitung fĆ¼r -Kategorien-

Siemens

Siemens 15 Bedienungsanleitung

12 Dezember 2023
Exquisit

Exquisit EGSP130-E Bedienungsanleitung

11 Mai 2024
BEKO

BEKO BDFN26530B Bedienungsanleitung

4 Dezember 2024
BEKO

BEKO BDEN38560CHPA Bedienungsanleitung

4 Dezember 2024
BEKO

BEKO BDIN16520Q Bedienungsanleitung

4 Dezember 2024
BEKO

BEKO BDFN15421W Bedienungsanleitung

4 Dezember 2024
BEKO

BEKO BDIN15320 Bedienungsanleitung

4 Dezember 2024
BEKO

BEKO BDFS15020B Bedienungsanleitung

4 Dezember 2024
BEKO

BEKO BDFS15020S Bedienungsanleitung

4 Dezember 2024
BEKO

BEKO BDFN15421S Bedienungsanleitung

4 Dezember 2024