Fosi Audio M02 Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fosi Audio M02 (5 Seiten) in der Kategorie Receiver. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/5
Thank you very much for choosing our products! Please read this manual
carefully before using the product.
100W
100W
100W
100W 100W Front & back sur
Front & back sur
Front & back sur
Front & back surFront & back surface interface in
face interface in
face interface in
face interface inface interface instruction
struction
struction
structionstruction:
:
:
: :
3
3
3
33 :
:
:
: :
00W Front & back surface interface instruction
00W Front & back surface interface instruction
00W Front & back surface interface instruction
00W Front & back surface interface instruction00W Front & back surface interface instruction
1 Turn on/Off …………………………
2 Power Light …………………………
3 Full frequency/bass working mode switcher …………………………
4 Bass cutoff frequency control knob (the knob only works in bass mode) …………………………
5 Volume knob (increase clockwise and decrease counterclockwise) …………………………
6 Audio input interface (for example, CD, DAC decoder, mobile phone, TV, …………………………
red to right channel input, white to left channel input)
7 Subwoofer output (Connect the active subwoofer ………………………… ,Synchronous output with
power amplifier)
8 Speaker interface (red positive terminal, black negative terminal …………………………
9 Power interface (DC power shall not exceed ………………………… 35V)
Operat
Operat
Operat
OperatOperation Steps
ion Steps
ion Steps
ion Stepsion Steps
:
:
:
::
1 Make sure the VOL button to the minimum
2 Connect the speaker according to the rear board interface, and distinguish the positive and
negative poles
3 Connect the audio source you want to use
4 Connect the power
5 Select the required working mode (PBTL or SUB)
6 Press the switch
7 Turn the knob clockwise to select the required volume.
8 Under SUB operating mode, the bass cutoff frequency can be changed by adjusting the SUB FREQ
knob
9 The gain parameters of the switch with gain adjustment can be selected according to the
following parameters
100W
100W
100W
100W 100W Specification:
Specification:
Specification:
Specification:Specification:
Max Power
100W*1 2 Ω
Full frequency response
20Hz-20kHz( 3dB) ±
The speaker matches the
impedance
2-8 Ω
THD
Output 1W @ 0.03%
Working Voltage
DC12-24V
SNR
≥106dB
Input sensitivity
0.775V
Product Dimension
L118.5*W98*H33MM
Bass cutoff frequency
range adjustment
40-300Hz
Weight
0.36kG
Slope of bass attenuation
-12dB Slope
Package Size
L257*W215*H65MM
3
3
3
33 Specificat
Specificat
Specificat
SpecificatSpecification:
ion:
ion:
ion: ion:
00W
00W
00W
00W 00W
Max Power
300W*1 2 Ω
Full frequency response
20Hz-20kHz( 3dB) ±
The speaker matches the
impedance
2-8 Ω
THD
Output 1W @ 0.03%
Working Voltage
DC 3524- V
SNR
≥106dB
Input sensitivity
0.775V
Product Dimension
L120 117.5*H36 *W MM
Bass cutoff frequency
range adjustment
40-300Hz
Weight
0. kG5
Slope of bass attenuation
-12dB Slope
Package Size
L257*W215*H65MM
Freque
Freque
Freque
FrequeFrequently Asked Quest
ntly Asked Quest
ntly Asked Quest
ntly Asked Questntly Asked Questions:
ions:
ions:
ions:ions:
Q: Al
Q: Al
Q: Al
Q: AlQ: All cables a
l cables a
l cables a
l cables al cables are connec
re connec
re connec
re connecre connected, b
ted, b
ted, b
ted, bted, but no so
ut no so
ut no so
ut no sout no sound outpu
und outpu
und outpu
und outpuund output?
t?
t?
t? t?
A:
1. Check if the POWER indicator is on, and turn on the POWER if it is not on. When the indicator
light is still not on after turn on the power, you can find a laptop power and connect to test
whether it is the machine fault or a power failure.

Produktspezifikationen

Marke: Fosi Audio
Kategorie: Receiver
Modell: M02

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fosi Audio M02 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Receiver Fosi Audio

Bedienungsanleitung Receiver

Neueste Bedienungsanleitung für -Kategorien-