Foscam VD1LE Bedienungsanleitung

Foscam Türklingel VD1LE

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Foscam VD1LE (3 Seiten) in der Kategorie Türklingel. Dieser Bedienungsanleitung war für 25 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

V1.1

305503000600

Support email: support@foscam.com

Quick Setup Guide

Video Doorbell

Physical Description

Camera Micro SD Card Slot

Reset

Light sensor

Microphone

Front Panel Rear Panel

Doorbell button

Power Input Port

Type-C Port

Mounting slots

Speaker

Bottom Panel

Security screw hole

Add Device: Connection via the Foscam

App (Recommended)

It is strongly recommended that you complete the "add devices"

process on the Foscam app before the doorbell hardware is installed.

To ensure a smoother video experience on your smart phone, it is recommended that your smart

phone meet the following specications:

iOS: version 11 or higher.

Android: 4.1 or higher, using a device with a Graphics Processing

Unit (GPU).

Before You Get Started

Scan the QR code below to download and install the Foscam APP, and learn how to add the

doorbell to the APP.

Note: For the best experience, please update the APP to the latest version! 3

1. Plug the smaller end of the USB cable into the Type-C port on the back of the Video Doorbell,

and the larger end into a USB wall charger such as your smartphone charger ( powerDC5V 1.0A

output recommended for faster charging). Please wait for a few seconds until you hear “Ready

for WiFi conguration”.

WiFi connection

Conrm

WiFi conne ction

WiFi

2. Make sure that your smart phone is connected to your WiFi router.

Foscam_1

Foscam_2

xxxxx_2.4G

xxxxx_5G

Tips: If you didn’t hear the voice prompt, press and hold reset for about 10 seconds to reset the

camera.

Please note that it is forbidden to connect the doorbell to AC and Type -C power

supply at the same time.

Tips: The camera supports dual-band 2.4GHz and 5GHz WiFi networks, so you can choose the

channel with the stronger signal to use. For example, choose your SSID: XXXXX_2.4G or XXXXX_5G.

3. Open the foscam APP and please sign up for a Foscam account, or sign in if you have one already.

4. After logging into Foscam APP, select “Tap to add a camera” or " " icon on the upper right +

corner, then select " " and scan the QR code that labeled at the bottom of yourScan the QR code

camera.

Scan the QR code, located at

the bottom of your camera

Tap + icon Select ”Scan the QR code”

Tap to add a camera

Add Device

Scan the QR code

Search in LAN

Manually add

Scan QR Code

Mod el : XXX

MAC ID: 000000000000

Username(default): admin

Pass word(default):(blank)

DDNS:XXXXXX.

myfos cam.org

FCC ID:XXXXX

IC:12558A-XX

S/N:FIAI1403000001

UID:XXXXXXXXXXX

FHD Wirele ss IP Came ra

5. In “Add Device”, if you hear " select the checkbox and tap ” continue to Hello Foscam", Next”,

conrm that the device is in the blue ashing state and tap ” In “WiFi connection”, enter Next”.

your WiFi's password and tap " " (see illustrations on next page).Conrm

Heard "Hello Foscam"

and tap "Next"

Conrm

device

ashes blue

I have heard “Hello Foscam”

Add Device

Power the device on until

the device voice prompts

"Hello foscam"

Device flashes blue

Add Device

Conrm that the device is

in the blue ashing state

Enter your WiFi's password

and tap "Conrm"

Wi-Fi connection

The device will added by scanning the QR

code and sound waves.

Foscam_2.4G

2.4GHz / 5.0GHz

WiFi Password

Conrm

6. Please scan the QR code on the doorbell with the smartphone camera, then you will hear a

voice prompt say ”WiFi connecting” Select the checkbox and tap ”. Next”.

Place the QR code directly

in front of the camera

For WiFi configuration, please point the

QR code to the camera direc tly.

WiFi connection

I have heard the voice prompt

“WiFi connecting”

Tick the checkbox and tap “Next”

10~15cm

3.94~5.9in

Tips: Please place the QR code on the phone screen about 10 to 15cm (3.94 to 5.9in) away, and if

you encounter diculties you can try to move the screen slowly around 10 – 15cm (3.94 - 5.9in).

Remove the existing doorbell button near the front door. Pull the two wires out carefully when

removing the old doorbell. Straighten the wire ends if necessary.

What's required: Dual-purpose screwdriver

Dual-purpose screwdriver

(Phillips screwdriver side)

Step 4

After removing the cover of the mechanical chime or digital chime, use the wire connection

terminal with the Power Kit as pictured. After wiring is completed, replace the cover.

You can scan the QR code below to search and watch the power kit installation video.

Video Doorbell Installation

Note:

1. Make sure you have installed the Foscam App, and have scanned the doorbell QR code and

completed the "add device" process in the app before beginning the hardware installation

process.

2. If you choose to use AC power to power the video doorbell, you need to ensure that the

specication of the transformer in your home is 8V~24V AC, the minimum power requirement

is . 8VA

3. If you use DC power to power the video doorbell, you need to prepare a power DC12V~30V

adapter the minimum power requirement is . , 6W

4. If you use Type-C interface to power the video doorbell, you need to prepare a power DC5/1A

adapter the minimum power requirement is ., 5W

Step 1

Ring the existing doorbell, make sure it’s working and locate the place of your existing chimes in

the house.

Step 2

Shut o the master circuit breaker in your house. Turn the lights in your home on / o to make

sure the electricity in your house is properly shut o.

OFF

If you're not comfortable doing it yourself, consult a qualied electrician.

Note: If the process of adding a camera fails, please reset your camera and try adding again

according to the above method.

Camera added successfully

and the name has been set

7. Wait a few seconds until the camera noties you that the “Wireless connection succeeded”,

which means your camera has connected to your WiFi successfully. After, you can set the

camera name and tap “ ” in "Set name" interface.Save

Reset

Set name

Save

Camera added successfully

Please set the camera name:

My Camera

Device white light flashes

Add Device

The Wi-Fi conguration is

complete, and the white

light of the device ashes

Conrm device white light ashes

YouTube

Step 3

Indoor chimes are generally of two types: mechanical, or digital. If you need to use the existing

mechanical chime or digital chime in your home, please install the Power Kit in parallel to the

chime. Power Kit is generally used to solve the problem of abnormal ringing of the chime after the

video doorbell replaces the traditional doorbell buttons.

How to distinguish between Digital Chime and mechanical Chime, please scan the following QR

code to view.

What's required: Dual-purpose screwdriver

Dual-purpose screwdriver

(Phillips screwdriver side)

YouTube

10. After completing the above steps, you can begin installing your camera.

9. Tapping on the play button in the video box will jump to the “Camera Login” setting interface.

For your security, please set a new username and password for your camera before viewing live

video.

Set a new username and password

Camera Login

New camera username

Re-enter new camera

password

New camera password

Tap “ ”

Foscam_camera

Submit

8. In “Select Chime Type”, tap ”Select Chime Type”, and tap ”Next”. In “Select Chime Type”, Select

Chime Type and tap " " or " " or " " (Please select the type of Mechanical chime Digital chime None

your existing chime).

Tap Select Chime Type

Select Chime Type

The video doorbell can work

with your existing Mechanical

chime or Digital chime. Please

select the type of your existing

chime after watching the video

with a description on this

subject.

Mechanical chime

Select Chime Type

Mechanica Chimel Digtal Chimel

Digital chime

None

Select the type of

your existing chime

Note: Please carefully conrm the existing chime type in your home. If the chime type is selected

incorrectly, the transformer and chime at home will be damaged, causing the doorbell and chime

to not work properly. Generally, a mechanical chime refers to the ringing sound made by striking a

metal with a metal striker, while digital chime refers to the ringing sound made by playing music

through a speaker.

If you are still not sure, please watch the chime type description video carefully, or consult our

customer service sta.

Bypass Model: If you don’t want to use the existing chime, you can switch the cable on the Power

kit to the bypass interface, and then connect it in parallel to the existing chime. This will

short-circuit the chime at your home. You can choose to add WiFi chime,realize the function

of chime. If you choose to use the Power Kit by pass mode, be sure to set the chime type to

"None" in your APP to avoid damaging the transformer.

FRONTTRANSREAR

Remove the cover

Replace the cover

Bypass Mode

APP add doorbell

instruction video

YouTube

Download the

Foscam APP

What’s in the Box

1 x

Type-c cable

1 x 5° Vertical angle bracket

1 x 15° Horizontal angle bracket

1 x

Power Kit

1 x Video Doorbell

1 x Mounting bracket

2 x

Wire Nuts

1 x

Silicone Plug

1 x

Dual-purpose screwdriver

1 x

Drill Hole

Position Template

1 x Thick mounting bracket

2 x

Wire Extenders

1 x Quick Setup Guide

1 x

Expansion Screws

Quick Setup Guide

Video Doorbell

Step 7

Video Doorbell

Door Video Doorbell Door

Optional: Use the 15° mounting bracket or 5° mounting bracket as a supplementary mounting

bracket if you wish to adjust the doorbell camera's eld of view to cover more of one side.

www.foscam.com

CE Certificate statement Website:

https://www.foscam.com/company/ce-certificate.html

Exporter and Importer Information Opened to Public:

https://www.foscam.com/company/open-information.html

Due to product upgrades and other reasons, this guide may be slow to update, resulting in slight inconsistencies

with the ocial website information. Please take the ocial website (www.foscam.com) information as the

current standard.

Manufacturer: Shenzhen Foscam Intelligent Technology Co., Ltd

Addr: Room 901-902, Building 1B, Xingke 1st Street, Shenzhen International Innovation

Valley, Nanshan Dist., Shenzhen, 518055, China

Support email: support@foscam.com

Video Doorbell Door

5°

15°

Step 8

Lead the two existing doorbell wires through the central square hole on the bracket before you

start mounting.

Insert the two provided screws through the screw holes, or through the 5° Vertical angle bracket /

15° Horizontal angle bracket / Thick mounting bracket, install the mounting bracket to the 5° （

Vertical angle bracket / 15° Horizontal angle bracket ), and fasten the screws tightly.

What is required: Mounting Bracket / Screw Packs / 5° Vertical angle bracket(Optional) /

15° Horizontal angle bracket (optional) / Dual-purpose screwdriver

With 5° Vertical angle bracket

Optional Install B Optional Install C

Wall Wall5° Vertical

angle

bracket

Mounting

Bracket 15°

Horizontal

angle bracket

Mounting

Bracket

35mm(1.38’’)

Mounting Screws

35mm(1.38’’)

Mounting Screws

With 15° Horizontal angle bracket

Without angle bracket

Mounting

Bracket

Wall

Optional Install A

22mm(0.87’’)

Mounting Screws

Step 9

Connect the wires to the two terminals at the back of the doorbell, then tighten the terminal

screws. Wire can connect to any terminal as the electric current is alternating current.

Note: To prevent short-circuit, make sure the wires are not touching each other after connecting

them to the terminals. If the wires are too short, use the extension wires and wire nuts provided

to make them longer. Use electrical wiring tape to secure the connection if the wall doesn't have

space for wire nuts.

What are required: Extension Wires and Wire Nuts (Optional) / Video doorbell /

Philips-Head Screwdriver

Wall Wall

15°

Vertical

angle

bracket

Mounting

Bracket

5°

Horizontal

angle

bracket

Thick mounting bracket

45mm(1.77’’)

Mounting Screws

22mm(0.87’’)

Mounting Screws

Optional Install D Optional Install E

With 5° Vertical angle bracket and

15° Horizontal angle bracket

With Thick mounting bracket

This installation method can be used for

Type-c cable for DC power supply

Extension Wires and

Wire Nuts (Optional)

Dual-purpose

screwdriver (Phillips

screwdriver side)

Please note that it is forbidden

to connect the doorbell to AC

and Type -C power supply at

the same time.

Hook the doorbell on top of the mounting bracket and then snap the doorbell bottom to the

bracket. You may hear a "click" sound.

Step 10

Step 11

Switch the master circuit breaker in your house back to ON.

Press the doorbell to test the chime connection.

Did your doorbell chime? If yes, it’s working! If no, check that wires are secure.

Open the foscam APP again and check if you can view live video.

Foscam_camera

If not, please remove the doorbell and press the reset button to re-add it in the app.

Step 12

Reset

Use the included screwdriver to tighten the anti-theft screw.

Step 13

What's required: Dual-purpose screwdriver

Dual-purpose screwdriver

(Torx screwdriver side)

Foscam VMS

Foscam VMS is a new tool for PCs. It does not require plug-ins and is compatible with Windows &

Mac, supporting all Foscam HD cameras and up to 36 cameras at the same time. If you would like

to manage multiple cameras, we suggest you install Foscam VMS. You can download the “Foscam

VMS ” Windows version from foscam.com/vms, and can download the "Foscam VMS" Mac version

from the APP store: https://apps.apple.com/cn/app/foscamvms/id1521202507?mt=12

Add the IP Camera

1. Run Foscam VMS, then create a local administrator account and login.

2. Tap the "+" icon on the Foscam VMS and follow the setup wizard to add your camera.

Please visit to view the user manual and for additional detailed steps.foscam.com/downloads

Note: For the best experience, please update Foscam VMS to the latest version!

Other Ways to Access Your Doorbell

Doorbell Username & Password

Important Notice

The doorbell username & password are used to access and manage your doorbell. Having a strong

password can signicantly improve the security of your doorbell.

If you have forgotten either of them, please press the "Reset" button and hold it for more than 10

seconds while the doorbell is powered on. After hearing the voice prompt, release the button. The

doorbell will automatically reboot and the default settings will be restored.

You can then reconnect the camera by following this Quick Setup Guide.

Your Foscam Cloud service account and password may be used to access both the Foscam App

and the Foscam Cloud service website. Therefore, you can register your account username &

password on either one.

Foscam Cloud Service Account Username & Password

StorageMedia

Your doorbell supports cloud, NVR (Network Video Recorder), and Micro SD card (supports

FAT-32 and ex-FAT format) storage formats. If you wish to record and play back large amounts of

video, we recommend using a Foscam NVR device as well.

Firmware Upgrades

You can upgrade the rmware of your camera with the Foscam App by using the new

“One-Key-Online Upgrade” feature (Open the Foscam App and Login to the camera, select

“Settings” > “Firmware Upgrade”).

You also can download the latest version to upgrade your camera from our ocial website

foscam.com/upgrades.

Safety Tips

Please ensure that the proper power supply is used before using the doorbell.

Please install the doorbell and bracket securely using the screws provided.

Please use this product within the temperature range -4°F~122°F (-20 ~50 ). When the ℃ ℃

ambient temperature is too high or too low, it may cause product failure.

To avoid the risk of re or electric shock, please keep your camera in a cool, dry place.

Please keep the doorbell out of reach of small children.

This product is not a toy; children should use the product under adult supervision.

Change your default port to a greater range to help ensure the safety of your connection. How

to change the default port: please visit to view the user manual.foscam.com/downloads

Check the logs of your Foscam doorbell frequently. Foscam doorbell have embedded logs

telling you which IP addresses are accessing the doorbell.

WLAN frequency range: 2412MHz - 2472MHz and 5725MHz - 5850MHz

Maximum transmission power: < 16dBm

Wireless Standard: IEEE802.11b/g/n (2.4GHz)

IEEE802.11a/n/ac (5GHz)

Power Supply: DC 5V 1.0A 5W or AC 8~24V

Product Performance

Technical Support

If you have problems with your Foscam device, please contact the reseller you purchased from,

or you can e-mail the company headquarters technical support team :support@foscam.com

Your valuable comments and suggestions on improving Foscam products are welcomed!

Foscam APP Installation video

on YouTuBe

FAQ

YouT ube

Step 6

Use the provided wall anchors if installing in materials such as stucco, brick, or concrete. If installing

into a wooden doorframe, there is no need to use the wall anchors.

Anchors

Step 5

Determine the mounting position of the doorbell. First check if you can reuse the existing holes in

the wall. Use the drill hole position template to mark the screw holes in the area where the

existing doorbell button was located. Place the drill hole position template at least 1.5m (59") high

from the ground to ensure that the height of the installed doorbell will be suitable, and then drill

the holes (use PH2 drill bit).

1.8m(71in)

1.5m (59in)

0.3m

(12in)

(39.3in)

Drill Hole Position

Template

Power Drill with

PH2 Drill Bit

Mounting Bracket

15° Horizontal angle

bracket(Optional)

5° Vertical angle

bracket(Optional)

Thick mounting

bracket

Screw Packs(Anchors

are optional)

Dual-purpose

screwdriver (Phillips

screwdriver side)

Video Doorbell

Produktspezifikationen

Marke:	Foscam
Kategorie:	Türklingel
Modell:	VD1LE

Brauchst du Hilfe?

Wenn Sie Hilfe mit Foscam VD1LE benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Türklingel Foscam

Foscam VD1LE Bedienungsanleitung

12 Juli 2024

Bedienungsanleitung Türklingel

Neueste Bedienungsanleitung für -Kategorien-

Panasonic VL-VM902EX Bedienungsanleitung

12 Oktober 2024

Byron BY236E Bedienungsanleitung

9 Oktober 2024

Byron B432E Bedienungsanleitung

5 Oktober 2024

Byron DBY-23512 Bedienungsanleitung

4 Oktober 2024

EnVivo 1348 Bedienungsanleitung

3 Oktober 2024

Byron 10.015.46 Bedienungsanleitung

2 Oktober 2024

Fagor 3CFT-605N Bedienungsanleitung

2 Oktober 2024

HQ EL-WDB101 Bedienungsanleitung

2 Oktober 2024

Elro DB210 Bedienungsanleitung

2 Oktober 2024

Belkin Wemo Smart Video Doorbell Bedienungsanleitung

2 Oktober 2024