Fortinet FortiAP 210B Bedienungsanleitung

Fortinet Zugangspunkt FortiAP 210B

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fortinet FortiAP 210B (20 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 26 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/20

FortiAP 210B/220B

QuickStart Guide

October 10, 2013

20-000-127515-20131010

FortiGuard®, are registered trademarks of Fortinet, Inc., and other Fortinet

names herein may also be trademarks of Fortinet. All other product or company

names may be trademarks of their respective owners. Performance metrics

contained herein were attained in internal lab tests under ideal conditions, and

performance may vary. Network variables, different network environments and

other conditions may affect performance results. Nothing herein represents any

binding commitment by Fortinet, and Fortinet disclaims all warranties, whether

express or implied, except to the extent Fortinet enters a binding written contract,

signed by Fortinet’s General Counsel, with a purchaser that expressly warrants

that the identiﬁed product will perform according to the performance metrics

herein. For absolute clarity, any such warranty will be limited to performance in

the same ideal conditions as in Fortinet’s internal lab tests. Fortinet disclaims

in full any guarantees. Fortinet reserves the right to change, modify, transfer, or

otherwise revise this publication without notice, and the most current version of

the publication shall be applicable.

Table of Contents

Package Contents 1

Connecting Your FortiAP Unit 2

Conﬁguring Your FortiAP Unit 3

Technical Speciﬁcations 5

LED Speciﬁcations 6

Cautions and Warnings 7

Documentation and Links 9

Product License Agreement 11

Package Contents

Fortinet’s FortiAP wireless thin access points deliver secure, identity-

driven WiFi client access that creates a fortiﬁed WLAN network that is

centrally managed by a FortiGate or FortiWiFi platform.

Your box contains the following:

FortiAP 210B/220B

QuickStart Guide

Power Cable

Page 1

Note: Accessories may not be exactly as shown.

Power Adapter

FortiAP 210B/220B

QuickStart Guide

Page 3

Conﬁguring Your FortiAP Unit

The FortiAP unit is designed to require no conﬁguration in most networks.

Zero Conﬁguration mode works if the unit is directly connected to the

FortiGate or FortiWiﬁ performing the Wireless LAN Controller (WLC)

functions, or on the same layer-2 network and subnet as the FortiGate or

FortiWiﬁ unit.

If the FortiAP wireless controller’s IP address cannot be determined using

Zero Conﬁguration mode, or if the network uses static IP addresses, it can

be conﬁgured to use a static IP address.

To enable the FortiAP using Zero Conﬁguration:

1. After connecting the FortiAP unit as described in the previous chapter, the

unit goes through its boot procedure and requests an IP address from the

DHCP server.

2. If the IP address is retrieved successfully, the FortiAP enters discovery

mode to locate a FortiGate or FortiWiﬁ wireless controller. The discovery

modes are:

• Broadcast

• Multicast

• DHCP option 138

3. Verify that the FortiAP has successfully connected to the controller.

In the FortiGate Web-based Manager, go to WiFi Controller > Managed

Access Points > Managed FortiAP. A successfully discovered unit displays

an orange circle with a question mark.

4. Select the access point and click .Edit

5. In the ﬁeld, select .State Authorize

6. In the AP Proﬁle ﬁeld, select Change, then select a proﬁle from the list and

click .OK

The conﬁguration is downloaded from the wireless controller to the

FortiAP and the WiFi LED lights up.

Page 4

To enable the FortiAP with a static IP address:

1. Connect the FortiAP device to a separate private switch or hub, or directly

connect it to your management computer via a cross-over cable.

2. Conﬁgure the management computer to be on the same subnet as the

internal interface of the FortiAP unit:

a. Browse to the Network and Sharing Center > Change Adapter

Settings > Local Area Connection Properties > Internet Protocol

Version 4 (TCP/IPv4) Properties.

b. Change the IP address of the management computer to 192.168.1.3

and the netmask to 255.255.255.0.

3. Telnet to IP address 192.168.1.2.

4. Type admin in the Name ﬁeld, leave the Password ﬁeld blank, and press

Enter.

5. Conﬁgure a static IP address for the FortiAP unit and netmask & gateway

information for your network, using the following commands:

cfg -a ADDR_MODE=STATIC

cfg –a AP_IPADDR=xxx.xxx.xxx.xx

cfg –a AP_NETMASK=255.255.255.0

cfg –a IPGW=yyy.yyy.yyy.yyy

cfg –a AC_IPADDR_1=zzz.zzz.zzz.zzz

where xxx is the IP address of the FortiAP unit, yyy is the Gateway IP

address and zzz is the IP address of the FortiGate wireless controller.

6. Save the conﬁguration by typing the following command:

cfg –c

7. Unplug the FortiAP unit and plug it back in order for the conﬁguration to

take effect.

8. Move the FortiAP to the intended deployment location and connect the

Ethernet cable as described in the Connecting chapter.

9. Log in to the FortiGate controller Web-based Manager, and go to

WiFi Controller > Managed Access Points > Managed FortiAP. A

successfully discovered unit displays an orange circle with a question

mark in the Status column.

10. Select the access point and click .Edit

11. In the ﬁeld, select .State Authorize

12. In the dialog box, select . Leave the Edit FortiAP Enable Wireless Radio

remaining settings at their default values. The conﬁguration is downloaded

from the FortiGate unit to the FortiAP device.

For more information, see the , available Deploying Wireless Networks Guide

on Fortinet’s technical documentation website, .http://docs.fortinet.com

Technical Speciﬁcations

Page 5

# Interface Type Description

1 USB USB-A For future use.

2 Console RJ-45 Optional serial connection to the

Management Computer. Also gives access to

the CLI.

3 Ethernet port RJ-45 Gigabit Ethernet port with PoE support up to

15.4W, IEEE 802.3af.

4 Power

Connection

12V DC, 1.5A, center positive

100-240V AC, 0.6A, 50-60Hz adapter

5 Kensington

Security Slot

Anti-theft security slot for attaching a

lock-and-cable apparatus.

Hardware Speciﬁcation Description

Optional PoE Injector Fortinet PoE Injector: GPI-115 and

FortiSwitch products with PoE support.

Number of radios FortiAP 210B: 1

FortiAP 220B: 2

Frequency Bands (GHz) 802.11a/n: 5.150–5.250, 5.250–5.350,

5.470–5.725, 5.725–5.850

802.11b/g/n: 2.400–2.483

Indoor/Outdoor Deployment Indoor Only

USB

CONSOLE ETH PoE -48V

DC 12V, 1.5A

1 2 3 4 5

LED Speciﬁcations

Page 6

# LED State Description

1 WiFi 1

Green Wireless radio 1 is enabled.

Flashing Green Wireless activity.

Off Wireless radio 1 is disabled or off.

2WiFi 2

(FortiAP 220B Only)

Green Wireless radio 1 is enabled.

Flashing Green Wireless activity.

Off Wireless radio 1 is disabled or off.

3 WiFi 3 Not in use.

4 Ethernet

Green Port is transmitting and receiving data.

Flashing Green Port is connected at 1Gbps.

Amber Port is connected at 10/100Mbps.

Off Port is not connected.

5 Mode Green One or more radios is in Monitor mode.

Off No mode selected.

6 Status

Green The device is being managed by a

controller.

Flashing Amber The network connection has been lost.

Amber The controller has been found, but the

device is not being managed.

Off A controller has not been found.

7 Power

Green The unit is on.

Flashing Green The unit is booting up.

Off The unit is off.

1 2 3 4 6 75

Produktspezifikationen

Marke:	Fortinet
Kategorie:	Zugangspunkt
Modell:	FortiAP 210B
Breite:	145 mm
Tiefe:	267 mm
Gewicht:	675 g
AC-Netzadapter:	Ja
Mitgelieferte Kabel:	AC
Produktfarbe:	Weiß
Höhe:	44 mm
Gleichstrom-Anschluss (DC):	Ja
Antennentyp:	Extern
Betriebstemperatur:	-20 - 60 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Paketgewicht:	1235 g
Netzstandard:	IEEE 802.11b,IEEE 802.11e,IEEE 802.11g,IEEE 802.11h,IEEE 802.11i,IEEE 802.11n,IEEE 802.1x,IEEE 802.3,IEEE 802.3u
Unterstützte Sicherheitsalgorithmen:	802.1x RADIUS,EAP,EAP-TLS,EAP-TTLS,PEAP,SSID
Schnellstartübersicht:	Ja
Power over Ethernet (PoE):	Ja
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	2
Maximale Datenübertragungsrate:	- Mbit/s
Ethernet LAN Datentransferraten:	10,100 Mbit/s
2,4 GHz:	Ja
Zahl der Benutzer:	- Benutzer
Durchsatz-Datenrate:	150 Mbit/s
Anzahl Kanäle:	- Kanäle
WAN Port:	Ethernet (RJ-45)
Antenne Zunahmeniveau (max):	6 dBi
Anzahl der Antennen:	1
Stromversorgung:	12.9 W
Eingebaut:	Nein
LED-Anzeigen:	Ja
Temperaturbereich bei Lagerung:	-20 - 70 °C
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
Montageset:	Ja