FoodSaver Jar Sealer Bedienungsanleitung


Lesen Sie kostenlos die đź“– deutsche Bedienungsanleitung fĂĽr FoodSaver Jar Sealer (2 Seiten) in der Kategorie Sonstiges/Sonstiges. Dieser Bedienungsanleitung war fĂĽr 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
®
Jar Sealer
Instructions
Vacuum Packaging System
Note: FoodSaver Jar Sealers can only be used with a FoodSaver® appliance that has an Accessory Port.
Please check your QuickStart Guide to see if your machine has one.
1. Place the FoodSaver® appliance on a flat, dry surface and plug the power cord into a standard
electrical outlet.
2. Place the item(s) to be vacuum packaged inside the Mason jar. Leave at least one inch (1”) between
the contents and the rim of the jar.
3. Wipe the rim to ensure it is clean and dry.
4. Place the Mason jar lid on the top of the Mason jar. (You will not need the screw band section of the
Mason jar lid. It is not used when vacuum packaging.) Push down firmly until the Jar Sealer covers the
entire rim of the jar.
5. Insert one end of the Accessory Hose into the Accessory Port on the FoodSaver® appliance.
6. Insert the other end of the Accessory Hose into the hole at the top of the Jar Sealer. Twist the gray tip
of the hose while inserting to ensure a tight fit.
5. Follow the steps for vacuum packaging as outlined in your QuickStart Guide.
Remember to remove the Accessory Hose from the Accessory Port on the appliance before vacuum
packaging in FoodSaver® Bags. Remove the hose by gently twisting the gray fitting while pulling it out.
How to Open a Mason Jar
To open a Mason jar, wedge a spoon between the Mason jar lid and the highest part of the threaded
rim. Twist the spoon gently to release the vacuum. When opened this way, the Mason jar lid can be
reused many times.
Care and Cleaning Instructions
1. FoodSaver® Jar Sealers should be washed in warm water using a mild dishwashing soap. Jar Sealers
are not dishwasher safe.
2. Dry thoroughly before using.
3. FoodSaver® Jar Sealers may not be washed in the dishwasher.
Troubleshooting
If the Mason jar will not vacuum.
1. Make sure the Jar Sealer is centered and pressed firmly over the lid of the Mason jar.
2. Make sure the rubber gasket on the Mason jar lid is free from food materials, crumbs, etc.
3. Make sure the rim of the Mason jar does not have any cracks or scratches. Any gaps can prevent a
vacuum from forming.
4. Make sure the Mason jar is not too full for vacuum packaging. Always leave at least one inch (1”)
between the contents and the lid.
5. Make sure the metal lid of the Mason jar is not bent.
6. Make sure the Accessory Hose is securely inserted into the Accessory Port on the appliance and in the
hole on the Jar Sealer.
Note: To avoid accidents, do not use a knife to remove the Mason jar lid. Also, do not use a bottle opener
to remove the Mason jar lid as it will bend the lid and prevent its reuse. Vacuum packaging is not a
substitute for canning.
If you need assistance:
In the U.S., call Consumer Services at 1-877-777-8042 or email customerservice@foodsaver.com.
In Canada, call 1-877-804-5383.
How to Vacuum Package Using the FoodSaver® Jar Sealer with Mason Jars
Printed in China www.foodsaver.com P.N. 143707
SPR-052110
© 2010 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed by
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.


Produktspezifikationen

Marke: FoodSaver
Kategorie: Sonstiges/Sonstiges
Modell: Jar Sealer

Brauchst du Hilfe?

Wenn Sie Hilfe mit FoodSaver Jar Sealer benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Sonstiges/Sonstiges FoodSaver

Bedienungsanleitung Sonstiges/Sonstiges

Neueste Bedienungsanleitung fĂĽr -Kategorien-