Fluke iFlex i1730 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fluke iFlex i1730 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 5 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
iFlex-1500-xx
iFlex-3000-xx
iFlex-6000-xx
Thin-Flexi Current Probe
Safety Information
To register your product, or to view, print, or download the latest
manual or manual supplement go to our website: www.fluke.com.
A Warning identifies hazardous conditions and procedures that
are dangerous to the user.
XW Warning
To prevent possible electrical shock, fire, or personal
injury:
Read all safety information before you use the
Product.
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
Comply with local and national safety codes. Use
personal protective equipment (approved rubber
gloves, face protection, and flame-resistant clothes)
to prevent shock and arc blast injury where hazardous
live conductors are exposed.
Do not use the Product around explosive gas, vapor,
or in damp or wet environments.
Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
PN 4272192 (English)
September 2013 Rev. 1, 10/21
©2013-2021 Fluke Corporation. All rights reserved. Specifications are
subject to change without notice. All Product names are trademarks of
their respective companies.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
De-energize the circuit or wear personal protective
equipment in compliance with local requirements
before you apply or remove the Product.
Do not use the Product if it is damaged.
Do not use the Product if it operates incorrectly.
Before each use, examine the Product. Look for cracks
or missing pieces of the clamp housing or output cable
insulation. Also look for loose or weakened
components. Carefully examine the insulation around
the jaws.
Do not use the Flexible Current Probe if it has
damaged insulation, exposed metal, or if the wear
indicator is visible.
Do not use a current measurement as an indication
that a circuit is safe to touch. A voltage measurement
is necessary to know if a circuit is hazardous.
Have an approved technician repair the Product.
Remove the input signals before you clean the
Product.
Specifications
Safety ........................................... IEC 61010-1: Pollution degree 2
IEC 61010-2-032: CAT IV 600 V,
CAT III 1000 V
Temperature
Operating ............................... -20 °C to 70 °C (-4 °F to 158 °F)
Temperature of conductor under
test shall not exceed 80 °C (176 °F)
Storage ................................... -40 °C to 80 °C (-40 °F to 176 °F)
Altitude
Operating ...............................2000 m
Storage ................................... 12 000 m
Symbols
The table below is a list of the symbols that can be used on the
Product or in this document.
Symbol Description
»Consult user documentation.
WWARNING. RISK OF DANGER.
XWARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.
TDouble insulation
¼
Measurement Category II is applicable to test and
measuring circuits connected directly to utilization
points (socket outlets and similar points) of the low
voltage MAINS installation.
½
Measurement Category III is applicable to test and
measuring circuits connected to the distribution
part of the building’s low-voltage MAINS installation.
¾
Measurement Category IV is applicable to test and
measuring circuits connected at the source of the
building’s low-voltage MAINS installation.
PConforms to European Union directives.
~
This product complies with the WEEE Directive
marking requirements. The affixed label indicates
that you must not discard this electrical/electronic
product in domestic household waste. Product
Category: With reference to the equipment types in
the WEEE Directive Annex I, this product is classed
as category 9 "Monitoring and Control
Instrumentation" product. Do not dispose of this
product as unsorted municipal waste.


Produktspezifikationen

Marke: Fluke
Kategorie: Nicht kategorisiert
Modell: iFlex i1730

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fluke iFlex i1730 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Fluke

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-