Fluke 80i-2010s Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fluke 80i-2010s (8 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
PN 5130594 June 2019
©2019 Fluke Corporation.
All rights reserved. Specifications are subject to change without notification.
All product names are trademarks of their respective companies.
80i-2010s
AC/DC Current Clamp
Instructions
Introduction
Use the Fluke 80i-2010s AC/DC Current Clamp (the Clamp or Product)
with oscilloscopes and digital multimeters and power analyzers for
accurate non-intrusive measurements of ac, dc, and complex waveform
currents.
Using advanced Hall Effect technology, the Clamp can accurately
measure currents up to 2000 A RMS. These features make it a powerful
tool for use in inverters, switch mode power supplies, industrial
controllers, automotive diagnostics, and other applications requiring
current measurements and/or waveform analysis.
Table 1 shows the Clamp.
How to Contact Fluke
To contact Fluke, call one of the following telephone numbers:
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-6714-3114
Singapore: +65-6799-5566
China: +86-400-921-0835
Brazil: +55-11-3530-8901
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.
Go to www.fluke.com to register your product and find more information.
Safety
A Warning identifies conditions and procedures that are dangerous to the
user.
XW Warning
To prevent possible electrical shock, fire, or personal injury:
Read all safety information before you use the Product.
Use the Product only as specified, or the protection
supplied by the Product can be compromised.
Comply with local and national safety codes. Use personal
protective equipment (approved rubber gloves, face
protection, and flame-resistant clothes) to prevent shock
and arc blast injury where hazardous live conductors are
exposed.
Do not use the Product around explosive gas, vapor, or in
damp or wet environments.
Examine the case before you use the Product. Look for
cracks or missing plastic. Carefully look at the insulation
around the terminals.
Table 1. 80i-2010s AC/DC Current Clamp
Item Description Item Description
Tactile Barrier DJaws
Zero Adjust EBattery Cover
Fastener
ON/OFF FBattery Cover
2
3
4
1
6
5
Use Product-approved measurement category (CAT),
voltage, and amperage rated accessories (probes, test
leads, and adapters) for all measurements.
Do not use test leads if they are damaged. Examine the
test leads for damaged insulation and measure a known
voltage.
Before each use, examine the Product. Look for cracks or
missing pieces of the clamp housing or output cable
insulation. Also look for loose or weakened components.
Carefully examine the insulation around the jaws.
Hold the Product behind the tactile barrier. See of
Table 1.
Do not use the Product if it is damaged.
Do not use the Product if it operates incorrectly.
The battery door must be closed and locked before you
operate the Product.
Remove all probes, test leads, and accessories before the
battery door is opened.
Do not work alone.
Do not exceed the Measurement Category (CAT) rating of
the lowest rated individual component of a Product,
probe, or accessory.
Do not touch voltages >30 V ac rms, 42 V ac peak, or
60 V dc.
Have an approved technician repair the Product.
Table 2 shows symbols that can be used on the Product or in this
document.
Table 2. Symbols
Symbol Definition
WWARNING - RISK OF DANGER.
XWARNING. HAZARDOUS VOLTAGE. Risk of electric
shock.
Consult user documentation.
TDouble Insulated
,Application around and removal from uninsulated
hazardous live conductors is permitted.
Battery
)Certified by CSA Group to North American safety
standards.


Produktspezifikationen

Marke: Fluke
Kategorie: Nicht kategorisiert
Modell: 80i-2010s

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fluke 80i-2010s benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Fluke

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-