Fluke 805 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fluke 805 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
SAVE
90˚
www.fluke.com
805/805 FC
Power on/off
Measure
Quick Reference Guide
PN 4045074 May 2012, Rev.2, 12/14
© 2012-2014 Fluke Corporation. All rights reserved.
Vibration Severity Per ISO 10816-1
Green Off
Green On
Push the sensor tip onto the test
surface, on solid metal, as close
as possible to the bearing. Apply
the compression force until
green LED is off.
Green Off
Data measurement
is complete.
Red On
Error, insufcient
force or time
duration, no data
measurement.
Crest Factor + (CF+)
LCD
Sensor Placement
Trending
Status LED
The Meter operates with a proprietary algorithm called Crest Factor + (CF+). To
make interpretation easy for the user, the CF+ value shows a severity range. The
higher the CF+ value is, the more the bearing damage.
The CF+ value shows for each measurement in the Bearing eld on the Meter
display. Push and to toggle between the CF+ value and the high frequency  
vibration level in units of acceleration.
Navigation
Enter
Save
Setup
Connector cover
Memory
Flashlight
on/off
Backlight
on/off
Vibration sensor
IR temperature
sensor
Flashlight
USB
port External
sensor port
Audio port (805 only)
Measurement Tips
LED Status
Push before you
apply the Meter to the test
surface.
For the best measurements, use these guidelines:
Push and position the Meter perpendicular to the test surface.
Push the sensor tip onto the test surface, on solid metal, and as close to the bearing as possible
until the green LED turns on.
Hold Meter in position with a consistent force until the green LED turns off. The test results show
on the display.
Machine Class I
Small
Machines
Class II
Medium
Machines
Class III
Large Rigid
Foundation
Class IV
Large Soft
Foundation
Vibration Velocity Vrms
in/s mm/s
0.01 0.28
0.02 0.45
0.03 0.71 GOOD
0.04 1.12
0.07 1.80
0.11 2.80 SATISFACTORY
0.18 4.50
0.28 7.10 UNSATISFACTORY
0.44 11.20
0.70 18.00
1.10 28.00 UNACCEPTABLE
1.77 45.90
Severity Scale
No repair action is recommended.
No immediate repair action is required. Increase the frequency
of measurements and monitor the condition of the machine.
Have a knowledgeable vibration technician conduct
more advanced tests at the earliest opportunity. Consider
maintenance action at the next planned downtime or
maintenance period.
Have a knowledgeable vibration technician conduct more
advanced tests as soon as possible. Consider immediate
shutdown of the machine to make repairs and prevent failure.
Meter Display
High Frequency
4,000 Hz to 20,000 Hz
Overall Vibration
Frequency Range:
10 Hz to 1,000 Hz
Temperature
-20 C to 200 C
Bearing Vibration
(CF+)
Overall Vibration
IR Temperature
Data Transfer
Export Data
A custom Microsoft Excel template helps you to evaluate the measurements. To
download the Trending template, go to www.uke.com. See Export Data in the Users
Manual for more information about the template and measurement plots.
See the Users Manual for important safety information and a complete list of warnings for this
product. To download the Users Manual, go to www.uke.com.
Navigation Setup Menu
Units
Time
Date
Quick Measurement
Safety and Warranty
 Warning
To prevent possible electrical shock, re, or personal injury:
Carefully read all instructions.
Do not touch hazardous voltages with the Product. These voltages could cause injury
or death.
Use the Product only as specied, or the protection supplied by the product can be
compromised.
Examine the case before you use the Product. Look for cracks or missing plastic.
Make sure the battery is securely in position before operation.
Do not use the Product around explosive gas, vapor, or in damp or wet environments.
Comply with local and national safety codes. Use personal protective equipment
(approved rubber gloves, face protection, and ame-resistant clothes) to prevent shock
and arc blast injury where hazardous live conductors are exposed.
To prevent personal injury from the infrared thermometer:
See emissivity information for actual temperatures. Reective objects result in lower
than actual temperature measurements. These objects pose a burn hazard.
To prevent personal injury when near rotating equipment:
Use caution around rotating equipment.
Keep cords and straps contained.
LIMITED WARRANTY AND LIMITATION OF LIABILITY
This Fluke product will be free from defects in material and workmanship for one year from the
date of purchase. This warranty does not cover fuses, disposable batteries, or damage from
accident, neglect, misuse, alteration, contamination, or abnormal conditions of operation or
handling. Resellers are not authorized to extend any other warranty on Fluke’s behalf. To obtain
service during the warranty period, contact your nearest Fluke authorized service center to obtain
return authorization information, then send the product to that Service Center with a description of
the problem.
THIS WARRANTY IS YOUR ONLY REMEDY. NO OTHER WARRANTIES, SUCH AS FITNESS
FOR A PARTICULAR PURPOSE, ARE EXPRESSED OR IMPLIED. FLUKE IS NOT LIABLE
FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES,
ARISING FROM ANY CAUSE OR THEORY. Since some states or countries do not allow the
exclusion or limitation of an implied warranty or of incidental or consequential damages, this
limitation of liability may not apply to you.
Fluke Corporation Fluke Europe B.V.
P.O. Box 9090 P.O. Box 1186
Everett, WA 98206-9090 5602 BD Eindhoven
U.S.A. The Netherlands
11/99
Before You Start
For general operation:
Moves the cursor
through the menu
options and edits the
options
Opens next menu or
sets the selection
Updates the
Meter with a new
selection setting
Recalls the previous
menu
Each menu has navigation hints for its content at the bottom of the screen.
Battery
Before the Meter operates for the rst
time, install the new batteries included
with the shipment.
Note
Set the battery type in the Device
Settings menu.
The Meter does not include a
rechargeable function. shows on the
display when battery power is low. Replace
the batteries before you continue to use the
Meter.
Meter Conguration Measurements
Auto Save Measurement
Save to Existing Setup
Create New Setup
General Specications
Operating Temperature -20
C to 50 C (-4 F to 122 F)
Storage Temperature -20
C to 60 C (-4 F to 140 F)
Operating/Storage Altitude Sea Level to 3,048 meters (10,000 feet)
For a complete list of specications see the Users Manual.
Note
Fluke ConnectTM
must be enabled.
Note
Fluke ConnectTM
must be enabled.
12 hr / 24 hr
hr / min / sec
am / pm
MM/DD/YYYY
DD/MM/YYYY
Month
Day
Year


Produktspezifikationen

Marke: Fluke
Kategorie: Nicht kategorisiert
Modell: 805

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fluke 805 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Fluke

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-