FLIR T4350BN Bedienungsanleitung

FLIR Überwachungskamera T4350BN

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für FLIR T4350BN (1 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/1
PACKAGE CONTENTS: Installing the Camera Adjusting the Camera
AA
Thermal Mini Bullet Camera
T4325BN / T4350BN SERIES
Quick Connection Guide
B
B
• Use an appropriate low voltage power cable to prevent fire or electrical shock.
• Make sure to install the camera in an area that can support the camera
weight.
• There are no user serviceable parts inside the camera. Please do not
disassemble the camera.
• Be careful not to leave fingerprints on the camera’s infared optics. Clean only
with low pressure fresh water and a lens cloth.
• Camera is rated for outdoor use (IP66), but is not intended for submersion in
water.
• If using DC power, make sure to follow the correct polarity as marked on the
power cable.
Ethernet Port: Connect the camera to a FLIR NVR or a router or switch
on your network using Cat5e or better Ethernet cable (not included). PoE
Class 3 supported.
Power Input: Connect a 12V DC power source if you are not using PoE.
Video Out (BNC): Analog video ouput to a test monitor (optional).
Ethernet Port: Not used.
Power Input: Connect a 12V DC power source (300mA or higher).
Video Out (BNC): Connect the camera to an analog DVR.
Ethernet Port: Install the MPX Terminator.
When you power up the camera with the
MPX Terminator installed, the camera operates as an MPX camera.
Power Input: Connect a 12V DC power source (300mA or higher).
Video Out (BNC): Connect the camera to a FLIR MPX DVR. Video and
MPX camera control are supported over a standard coaxial cable.
Safety PrecautionsWeights & Dimensions
C
C
Connecting the Camera
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated
in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case
the user will be required to correct the interference at his own expense.
FCC Notice
1 2 3
Information in this document is subject to change
without notice. As our products are subject to continuous
improvement, FLIR Systems, Inc. and our subsidiaries reserve
the right to modify product design, specifications and
prices, without notice and without incurring any obligation.
E&OE © 2015 FLIR Systems, Inc. All rights reserved.
T4325BN_T4350BN_SERIES_QCG_EN_R1
D
D
Use the included mounting template to mark holes
for the screws.
Drill holes for the mounting screws.
Connect cables as shown in the section “Connecting
the Camera”.
Mount the camera to the surface using the included
mounting screws (4x).
NOTE: Use the included drywall anchors if installing
into drywall.
1 x IP Bullet Camera 1 x Mounting Template
Quick Start Guides
1 x Allen Key 1 x RJ45 Waterproof Cap
1 x MPX Terminator
4 x Mounting Screws 4 x Drywall Anchors 2 x Allen Set Screws
Use a Phillips head screwdriver (not included) to
loosen the adjustment screw on the camera stand.
IP / PoE
MPX
Analog
Move the camera to the desired position. Tighten the
adjustment screw when finished.
Insert the included Allen set screws (2x).
Tighten the Allen set screws with the included Allen
key.
3.1” / 78mm
0.95lbs / 0.43kg
Weight
6.8” /
173mm
2.8” /
72mm
Drywall anchors (4x)
Mounting screws (4x)
Mounting template
Adjustment screw
Allen set screws (2x)
1.
1.
1.
2.
2.
2.
3.
3.
3.
A
B
C
For support, visit
Latest software and manuals available on
www.flir.com/security/support
www.flir.com/security/support
12V DC Power Input Polarity
123

Produktspezifikationen

Marke: FLIR
Kategorie: Überwachungskamera
Modell: T4350BN

Brauchst du Hilfe?

Wenn Sie Hilfe mit FLIR T4350BN benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Überwachungskamera FLIR

FLIR

FLIR Pinnacle DPD24DLR Bedienungsanleitung

2 Oktober 2024
FLIR

FLIR M42046 Bedienungsanleitung

14 September 2024
FLIR

FLIR PT-117 Bedienungsanleitung

9 September 2024
FLIR

FLIR M421612 Bedienungsanleitung

9 September 2024
FLIR

FLIR Saros DH-390 Bedienungsanleitung

4 September 2024
FLIR

FLIR T4350BN Bedienungsanleitung

3 September 2024
FLIR

FLIR G300 pt Bedienungsanleitung

19 August 2024
FLIR

FLIR M364 Bedienungsanleitung

17 August 2024
FLIR

FLIR M324CS Bedienungsanleitung

16 August 2024
FLIR

FLIR DNR7086 Bedienungsanleitung

16 August 2024

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-

Trebs

Trebs CCD-401C Bedienungsanleitung

15 Oktober 2024
D-Link

D-Link DCS-7510 Bedienungsanleitung

15 Oktober 2024
Foscam

Foscam FI9900EP Bedienungsanleitung

14 Oktober 2024
Alecto

Alecto DVC-215IP Bedienungsanleitung

14 Oktober 2024
Hikvision

Hikvision DS-2CD2326G2-IU Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Bedienungsanleitung

13 Oktober 2024
Hikvision

Hikvision DS-2CD7A26G0-IZ(H)SY Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2CE79DF8T-AZE Bedienungsanleitung

11 Oktober 2024
Hikvision

Hikvision DS-2XM6726G0-I(D)(S)(M)(/ND) Bedienungsanleitung

11 Oktober 2024