FLIR Summit DBV54TL Bedienungsanleitung

FLIR Überwachungskamera Summit DBV54TL

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für FLIR Summit DBV54TL (4 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 7 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Product Information
User Manuals Quick Start Guides
Specification Sheets
WARNING - A REGULATED UL / CSA APPROVED 12V DC power
supply is REQUIRED for use with this camera. Use of a non-regulated,
non-conforming power supply can damage this product and voids the
warranty.
Video Tutorials & DemosLatest News
Contents
700TVL VARIFOCAL
OUTDOOR IR DOME CAMERA
MODEL: DBV54TL
QUICK START GUIDE
English Version 1.0
www.flirsecurity.com/pro
IT’S ALL ON THE WEB!
www.flirsecurity.com/pro
VISIT
FLIR Systems, Inc.
Copyright © 2014
As our products are subject to continuous improvement, FLIR Systems,
Inc. reserves the right to modify product design, specifications and
prices, without notice and without incurring any obligation. E&OE
1 x Weatherproof IR Dome
Camera with Varifocal Lens
1 x Allen Key
Features
Safety Precautions
Use an appropriate low voltage power cable to prevent fire or
electrical shock.
Make sure to install the camera in an area that can support
the camera weight.
There are no user serviceable parts inside the camera. Please
do not disassemble the camera.
Do not clean the lens cover with an abrasive cleaning material.
Please use a soft cloth to clean the lens cover.
700 TVL Resolution, 1/3” 960H Image Sensor
True Day / Night with Mechanical ICR
2.8-12mm Varifocal Lens
Cold Climate Capability (Operates to -22°F/ -30°C)
90ft 27m IR Night Vision* ( )
IP66 Weatherproof Rating**
3 Axis Design for Wall / Ceiling Mount
External Zoom / Focus Adjustment
12V DC Operation
* IR Illumination range under ideal conditions. Objects at or beyond
this range may be partially or completely obscured, depending on the
camera application
** Not intended for submersion in water. Installation in a sheltered
area is recommended.
2 x Rubber Weatherproofing Plugs
4 x Mounting Screws
4 x Drywall Anchors
ZOOM
FOCUS
Camera Base
4. Insert rubber weatherproofing plugs
(2x) firmly into the ZOOM and FOCUS
screw-holes to ensure a weatherproof
seal.
Ensure that both the
ZOOM and FOCUS
screw-holes are covered.
Installing the Camera
ATTENTION - Test the camera prior to selecting a permanent
mounting location by temporarily connecting the camera(s) and
cables to the DVR.
Image Sensor 1/3” 960H Image Sensor
Video Format NTSC
Effective Pixels H: 960 V: 480
Horizontal Resolution 700 TVL
Scan System 2:1 Interlace
Sync System Internal
S / N Ratio 48dB (AGC Off)
Iris AES
AES Shutter Speed 1/60 ~ 1/25,000 sec.
Min. Illumination 0.3 Lux without IR LED
0 Lux with IR LED
Video Output Composite 1.0Vpp @ 75ohm
Lens Focal Length / Type 2.8–12mm / VarifocalF2.0
FOV (Diagonal) 28° ~ 94°
Termination Video: BNC Female
IR Range / Qty. 90ft 27m / ; 35 IR LEDs
Power Requirement 12V DC ± 10%
Power Consumption 12V: 275mA MAX with IR LED
Operating Temp. Range –22° ~ 122°F / –30° ~ 50°C
Environmental Rating IP66
Dimensions Diameter: 4.7” (120mm)
Height: 3.2” (80mm)
Weight (including stand) 1.4lbs / 0.6kg
Dimensions
Camera SpecificationsSetting up the Camera
1. Connect the BNC connector of the camera
to the video cable.
2. DC Power— : Connect a Power Adapter
12V DC Power Adapter (not included) to
the camera. Plug the Power Adapter into a
local power outlet.
DC Power— (not included): Power Pigtail
Connect a Power Pigtail to the camera.
Connect the terminating wires of the cable
directly to the DC power source.
NOTE: For pigtail connection with 12V DC, make sure to
check polarity specifications on the power adapter.
3. Use a flat-head screwdriver (not included)
to adjust the ZOOM and FOCUS control
screws as required.
1. Mark the position of the 4 holes in the camera
base. Drill holes where marked.
2. Insert drywall anchors as needed. OPTIONAL:
3. Mount the camera base to the wall or ceiling using
the included screws.
NOTE: You may need to disassemble the camera using
the provided Allen key. Loosen the tighening screw on the
outer ring of the Dome Cover and twist the Dome Cover
off.
4. Position the Ball Camera to the desired position
and angle.
5. Position the Dome Cover over the Ball Camera and
twist into place. Holding the cover firmly in place,
use the Allen key to tighten the screw on the outer
ring of the Dome Cover.
120mm / 4.7”
80mm / 3.2”
NOTE: Once the camera is mounted, you can adjust the
position and angle of the Ball Camera by slightly loosening
the Dome Cover. Weatherproofing
Plugs
ATTENTION - This camera includes an Auto Mechanical IR Cut Filter.
When the camera changes between Day/Night viewing modes, an
audible clicking noise may be heard from the camera. This clicking is
normal, and indicates that the camera filter is working.


Produktspezifikationen

Marke: FLIR
Kategorie: Überwachungskamera
Modell: Summit DBV54TL

Brauchst du Hilfe?

Wenn Sie Hilfe mit FLIR Summit DBV54TL benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Überwachungskamera FLIR

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-