FLIR PT-625 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für FLIR PT-625 (48 Seiten) in der Kategorie Überwachungskamera. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/48
Installation
Manual
PT-Series
427-0032-00-12, Version 170 Mar 2014 ii
© 2013 FLIR Commercial Systems, Inc. All rights reserved worldwide. No parts of this manual, in whole or in part,
may be copied, photocopied, translated, or transmitted to any electronic medium or machine readable form without
the prior written permission of FLIR Commercial Systems, Inc.
Names and marks appearing on the products herein are either registered trademarks or trademarks of FLIR
Commercial Systems, Inc. and/or its subsidiaries. All other trademarks, trade names, or company names
referenced herein are used for identification only and are the property of their respective owners.
This product is protected by patents, design patents, patents pending, or design patents pending.
The contents of this document are subject to change.
FLIR Commercial Systems, Inc.
70 Castilian Drive
Goleta, CA 93117
Phone: 888.747.FLIR (888.747.3547)
International: +1.805.964.9797
http://www.flir.com
Important Instructions and Notices to the User:
Modification of this device without the express authorization of FLIR Commercial Systems, Inc. may void the user’s
authority under FCC rules to operate this device.
Modification of this device without the express authorization of FLIR Commercial Systems, Inc., may void the
user’s authority under the FCC Rules to operate this device.
Note 1: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Op is likely to cause harmful eration of this equipment in a residential area
interference in which case the user will be required to correct the interference at his own expense. Shielded cables
must be used to connect this device to other devices.
Note 2: If ferrites are supplied with this was tested for compliance equipment, the equipment with the FCC limits for
a Class A digital device using power cables with the ferrites installed. When connecting one or two power cables to
the equipment, the supplied ferrites must be used with this equipment.
Industry Canada Notice:
This Class B digital apparatus complies with Canadian ICES-003.
Avis d’Industrie Canada:
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Proper Disposal of Electrical and Electronic Equipment (EEE)
The European Union (EU) has enacted Waste Electrical and Electronic Equipment Directive 2002/
96/EC (WEEE), which aims to prevent EEE waste from arising; to encourage reuse, recycling, and
recovery of EEE waste; and to promote environmental responsibility.
In accordance with these regulations, all EEE products labeled with the “crossed out wheeled bin”
either on the product itself or in the product literature must not be disposed of in regular rubbish
bins, mixed with regular household or other commercial waste, or by other regular municipal waste
collection means. Instead, and in order to prevent possible harm to the environment or human
health, all EEE products (including any cables that came with the product) should be responsibly discarded or
recycled.
To identify a responsible disposal method where you live, please contact your local waste collection or recycling
service, your original place of purchase or product supplier, or the responsible government authority in your area.
Business users should contact their supplier or refer to their purchase contract.
427-0032-00-12, Version 170 Mar 2014 iii
Table of Contents
Table of Contents
PT-Series Camera Installation
1.1 Warnings and Cautions 1-1
1.2 References 1-1
1.3 Camera Overview 1-1
1.4 Installation Overview 1-2
1.4.1 Camera Connection Options 1-2
1.4.2 Supplied Components 1-3
1.4.3 Required Components 1-3
1.5 Location Considerations 1-3
1.5.1 Bench Testing 1-3
1.5.2 Prior to Cutting/Drilling Holes 1-4
1.5.3 Camera Mounting 1-4
1.5.4 Removing the Back Cover 1-5
1.5.5 Cable Gland Sealing 1-5
1.5.6 Cable Glands and Spare Parts Kit 1-5
1.5.7 Cable Gland Seal Inserts 1-6
1.6 Camera Connections 1-6
1.6.1 Connecting power 1-6
1.6.2 Video Connections 1-6
1.6.3 Ethernet Connection 1-8
1.6.4 Serial Connection 1-8
1.7 Serial Communications Overview 1-8
1.8 Serial Communications Settings - Hardware DIP Switches 1-8
1.9 PT-Series Camera Specifications 1-11
Basic Operation and Configuration
2.1 Nexus IP Camera 2-1
2.1.1 Nexus Server Configuration 2-1
2.1.2 Serial and/or IP Communications 2-1
2.1.3 Serial Communications 2-2
2.1.4 Ethernet Communications 2-2
2.2 Basic Test and Configuration Steps 2-3
2.3 Camera Bench Test 2-3
2.4 Web Browser Interface 2-4
2.4.1 Log into the Camera Web Page 2-4
2.4.2 Camera Control and Status 2-5
2.4.3 Web Control Panel 2-6
2.4.4 Help 2-8
2.4.5 Log Off 2-8
2.5 Bench Test Using FSM 2-8
2.5.1 Running FSM 2-8
2.6 Basic Camera Configuration 2-11
2.6.1 Expert and Admin Accounts 2-11
2.6.2 Maintenance Menu 2-12
2.6.3 LAN Settings 2-13
2.6.4 Services (Date and Time Settings) 2-14


Produktspezifikationen

Marke: FLIR
Kategorie: Überwachungskamera
Modell: PT-625

Brauchst du Hilfe?

Wenn Sie Hilfe mit FLIR PT-625 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Überwachungskamera FLIR

Bedienungsanleitung Überwachungskamera

Neueste Bedienungsanleitung für -Kategorien-