Festo HMIYF-RF/DL25 Bedienungsanleitung

Festo Nicht kategorisiert HMIYF-RF/DL25

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Festo HMIYF-RF/DL25 (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
1. Installationsbausätze mit Montagebeispiel
1.a. HMIYF-RF/DL25
1 Installationsbausatz
HMIYF-RF/DL25
inklusive Befestigungs-
elemente A-C (siehe Ta-
belle).
1.b. HMIYF-RF/DL40
2 Installationsbausatz
HMIYF-RF/DL40
inklusive Befestigungs-
elemente A-C (siehe Ta-
belle).
1.c. Montagebeispiel
3 Adapterbausatz
HMVS-DL-...
4 Multipolverteiler
MPV-E/A..-M8
5 Energieführungskette
Bestimmungsgemäß dient
der Installationsbausatz
HMIYF-RF/DL... 1 bzw. 2
beim Aufbau von Portalsys-
temen als Anbindungsplatte
der E-Kette 5.
Hinweis
• Montieren Sie den Bausatz HMIYF-RF/DL... 1 bzw. 2 je nach Anbin-
dungsvariante. Die Anbindungsvarianten sind von der Ausführungsart
der Antriebsachse bzw. des Portalaufbaus (Mono- oder Duo-Bauweise)
abhängig. Die Zuordnung kann aus Tabelle 1 entnommen werden.
• Verwenden Sie nur zulässige Energieführungsketten laut Katalog.
Art Baukasten Antriebe Anbindungs-
varianten
HMBSY-RP.FP-D25-1 DGE-25-SP-KF 2.a.
HMBSY-RP.FP-D25-1 DGE-25-ZR-KF 2.a.
HMBSY-RP.FP-D25-1 DGPL-25-KF 2.a.
HMBSY-RP.FP-D25-2 DGC-25-KF 2.a.
Duo
BG 25
HMBSY-RP.FP-D25-3 DGE-25-ZR-RF 2.a.
HMBSY-RP.FP-M25-1 DGE-25-SP-KF 2.a.
HMBSY-RP.FP-M25-1 DGE-25-ZR-KF 2.a.
HMBSY-RP.FP-M25-1 DGPL-25-KF 2.a.
HMBSY-RP.FP-M25-2 DGC-25-KF 2.a.
Mono
BG 25
HMBSY-RP.FP-M25-3 DGE-25-ZR-RF 2.a.
HMBSY-RP.FP-D40-1 DGE-40-SP-KF 2.b.
HMBSY-RP.FP-D40-1 DGE-40-ZR-KF 2.b.
HMBSY-RP.FP-D40-1 DGE-40-ZR-RF 2.b.
HMBSY-RP.FP-D40-1 DGPL-40-KF 2.b.
Duo
BG 40
HMBSY-RP.FP-D40-2 DGC-40-KF 2.c.
HMBSY-RP.FP-M40-1 DGE-40-SP-KF 2.b.
HMBSY-RP.FP-M40-1 DGE-40-ZR-KF 2.b.
HMBSY-RP.FP-M40-1 DGE-40-ZR-RF 2.b.
HMBSY-RP.FP-M40-1 DGPL-40-KF 2.b.
Mono
BG 40
HMBSY-RP.FP-M40-2 DGC-40-KF 2.c.
Tabelle 1
2. Anbindungsvarianten (siehe Tabelle 1 und 2)
2.a. Duo-Systeme oder Mono-Systeme der Baugröße 25.
1 Installationsbausatz
HMIYF-RF/DL25
3 Adapterbausatz
HMVS-DL-25
5 Energieführungskette
•Befestigen Sie den Installa-
tionsbausatz 1 mit der
Seite X nach oben1)
an der Aussparung am A-
dapterbausatz 3.
•Befestigen Sie die E-Kette
5 an dem Bohrungspaar
wie abgebildet.
2.b. Duo-Systeme oder Mono-Systeme der Baugröße 40 (ohne DGC-40-KF).
2 Installationsbausatz
HMIYF-RF/DL40
3 Adapterbausatz
HMVS-DL-40
5 Energieführungskette
•Befestigen Sie den Installa-
tionsbausatz 2 mit der
Seite X nach oben1)
an der Aussparung am A-
dapterbausatz 3.
•Befestigen Sie die E-Kette
5 an dem Bohrungspaar
wie abgebildet.
2.c. Duo-Systeme oder Mono-Systeme mit DGC-40-KF.
2 Installationsbausatz
HMIYF-RF/DL40
3 Adapterbausatz
HMVS-DL-40
5 Energieführungskette
•Befestigen Sie den Installa-
tionsbausatz 2 mit der
Seite X nach oben1)
an der Aussparung am A-
dapterbausatz 3.
•Befestigen Sie die E-Kette
5 an dem Bohrungspaar
wie abgebildet.
3. Befestigungsschnittstellen für Anbaukomponenten.
3.a. Befestigungsschnittstelle für MPV-E/A08-M8
1 Installationsbausatz
HMIYF-RF/DL25
4 Multipolverteiler
MPV-E/A08-M8
3.b. Befestigungsschnittstelle für MPV-E/A08-M8
2 Installationsbausatz
HMIYF-RF/DL40
4 Multipolverteiler
MPV-E/A08-M8
3.c. Befestigungsschnittstelle für MPV-E/A12-M8
2 Installationsbausatz
HMIYF-RF/DL40
4 Multipolverteiler
MPV-E/A12-M8
Hinweis
Nach der Montage:
• Verfahren Sie die Achsen von Hand und überprüfen Sie dabei die Instal-
lation bzw. das leichte Abrollen der Energieführungsketten.
Hinweis
• Beachten Sie:
- dass nur Befestigungskombinationen aus der Tabelle zulässig sind.
- zur Erdung, die Montageanleitung des Erdungsbausatzes.
Montageanleitung (de)
688617 / 2005-03NH
†‡
Installationsbausatz
HMIYF-RF/DL...
Festo SE & G Co. K
Postfach
73726 Esslingen
++49/(0)711/347-0
www.festo.com
1
Installationsbausätze 1 2
1 2
1 2
1 21 2 1
1
1
11 bzw. 2
2
2
22
Typ HMIYF-RF/DL25 HMIYF-RF/DL40 HMIYF-RF/DL...
Teile-Nr. 539 659 539 660
Anbaukomponenten 3 3 4
3 3 4
3 3 4
3 3 43 3 4
Typ HMVS-DL25 HMVS-DL40 MPV-E/A..-M8
Anbaukomponente
Typ
Anbindungsvariante /
Schnittstelle
2.a. 2.b. /c. 3.a. / b. / c.
Senkschrauben
M5x14 DIN 7991 3x 3x
Senkschrauben
M6x16 DIN 7991 2x 2x
Zylinderschrauben
M4x18 DIN 912 2x
M4 M5 M6
2,9 5,8 10
5
5
5
55
1) Bei Anbindung der Energieführungskette 5 aus entgegengesetzter
Richtung als abgebildet, wenden Sie die Platte des Installations-
bausatzes 1 bzw. 2 entsprechend.
Gewinde
Befestigungselemente im Lieferumfang der Bausätze
Tabelle 2
Anzugsdrehmomente in Nm
A
C
E-Kette
B
2
1
-
2
3
5
5
1
3
B
A
5
2
3
B
A
4
1
C
C
4
2
4
2
C
5
2
3
B
A
4
1. Installation kits with assembly example
1.a. HMIYF-RF/DL25
1 Installation kit
HMIYF-RF/DL25
Including mounting at-
tachments A-C (see ta-
ble).
1.b. HMIYF-RF/DL40
2 Installation kit
HMIYF-RF/DL40
Including mounting at-
tachments A-C (see ta-
ble).
1.c. Assembly example
3 Adapter kit
HMVS-DL-...
4 Multi-pin plug
distributor
MPV-E/A..-M8
5 Chain link trunking
The installation kit HMIYF-
RF/DL... 1 or 2 has been
designed as a connecting
plate of the Cl-trunking 5
when portal systems are set
up.
Note
• Mount kit HMIYF-RF/DL... 1 or 2 according to connecting variant. The
connecting variants depend upon the design of the drive axis or the
gantry set up (mono or duo design). Allocation is shown in table 1.
• Use permissible chain link trunking only, as specified in the catalogue.
Ver-
sion
Modules Drives Connection
variants
HMBSY-RP.FP-D25-1 DGE-25-SP-KF 2.a.
HMBSY-RP.FP-D25-1 DGE-25-ZR-KF 2.a.
HMBSY-RP.FP-D25-1 DGPL-25-KF 2.a.
HMBSY-RP.FP-D25-2 DGC-25-KF 2.a.
Duo
BG 25
HMBSY-RP.FP-D25-3 DGE-25-ZR-RF 2.a.
HMBSY-RP.FP-M25-1 DGE-25-SP-KF 2.a.
HMBSY-RP.FP-M25-1 DGE-25-ZR-KF 2.a.
HMBSY-RP.FP-M25-1 DGPL-25-KF 2.a.
HMBSY-RP.FP-M25-2 DGC-25-KF 2.a.
Mono
BG 25
HMBSY-RP.FP-M25-3 DGE-25-ZR-RF 2.a.
HMBSY-RP.FP-D40-1 DGE-40-SP-KF 2.b.
HMBSY-RP.FP-D40-1 DGE-40-ZR-KF 2.b.
HMBSY-RP.FP-D40-1 DGE-40-ZR-RF 2.b.
HMBSY-RP.FP-D40-1 DGPL-40-KF 2.b.
Duo
BG 40
HMBSY-RP.FP-D40-2 DGC-40-KF 2.c.
HMBSY-RP.FP-M40-1 DGE-40-SP-KF 2.b.
HMBSY-RP.FP-M40-1 DGE-40-ZR-KF 2.b.
HMBSY-RP.FP-M40-1 DGE-40-ZR-RF 2.b.
HMBSY-RP.FP-M40-1 DGPL-40-KF 2.b.
Mono
BG 40
HMBSY-RP.FP-M40-2 DGC-40-KF 2.c.
Table1
2. Connection variants (see table 1 and 2)
2.a. Duo systems or mono systems of size 25.
1 Installation kit
HMIYF-RF/DL25
3 Adapter kit
HMVS-DL-25
5 Chain link trunking
•Secure the installation kit
1 to the opening in the
adapter kit 3 with side X
at the top1).
•Secure the chain link trunk-
ing 5 to the two drill holes
as shown.
2.b. Duo systems or mono systems of size 40 (without DGC-40-KF).
2 Installation kit
HMIYF-RF/DL40
3 Adapter kit
HMVS-DL-40
5 Chain link trunking
•Secure the installation kit
2 to the opening in the
adapter kit 3 with side X
at the top1).
•Secure the chain link trunk-
ing 5 to the two drill holes
as shown.
2.c. Duo systems or mono systems with DGC-40-KF.
2 Installation kit
HMIYF-RF/DL40
3 Adapter kit
HMVS-DL-40
5 Chain link trunking
•Secure the installation kit
2 to the opening in the
adapter kit 3 with side X
at the top1).
•Secure the chain link trunk-
ing 5 to the two drill holes
as shown.
3. Mounting interfaces for attachment components.
3.a. Mounting interface for MPV-E/A08-M8
1 Installation kit
HMIYF-RF/DL25
4 Multi-pin plug
distributor
MPV-E/A08-M8
3.b. Mounting interface for MPV-E/A08-M8
2 Installation kit
HMIYF-RF/DL40
4 Multi-pin plug
distributor
MPV-E/A08-M8
3.c. Mounting interface for MPV-E/A12-M8
2 Installation kit
HMIYF-RF/DL40
4 Multi-pin plug
distributor
MPV-E/A12-M8
Note
After assembly:
• Advance the axes manually, and check for correct installation of the
chain link trunking, i.e. smooth rolling.
Note
• Please note:
- that only attachment combinations shown in the table are permissible.
- for earthing, the assembly instructions for the earthing kit.
Assembly instructions (en)
688617 / 2005-03NH
†‡
Installation kit
HMIYF-RF/DL...
Festo SE & G Co. K
Postfach
73726 Esslingen
++49/(0)711/347-0
www.festo.com
1
Installation kits 1 2
1 2
1 2
1 21 2 1
1
1
11 2
2
2
22 or
Type HMIYF-RF/DL25 HMIYF-RF/DL40 HMIYF-RF/DL...
Part No. 539 659 539 660
Attachment components 3 3 4
3 3 4
3 3 4
3 3 43 3 4
Type HMVS-DL25 HMVS-DL40 MPV-E/A..-M8
Attachment component
Type
Connection variant / Interface 2.a. 2.b. /c. 3.a. / b. / c.
Countersunk screws
M5x14 DIN 7991 3x 3x
Countersunk screws
M6x16 DIN 7991 2x 2x
Socket head screws
M4x18 DIN 912 2x
M4 M5 M6
2.9 5.8 10
5
5
5
55
1) If chain link trunking 5is connected from the direction o
pp
osite the one shown, turn the
p
late included
with the installation kit 1 or 2 accordingly.
Threads
Mounting attachments included with kits
Table 2
Tightening torques in Nm
A
C
Cl-trunking
B
2
1
-
2
3
5
5
1
3
B
A
5
2
3
B
A
4
1
C
C
4
2
4
2
C
5
2
3
B
A
4


Produktspezifikationen

Marke: Festo
Kategorie: Nicht kategorisiert
Modell: HMIYF-RF/DL25

Brauchst du Hilfe?

Wenn Sie Hilfe mit Festo HMIYF-RF/DL25 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Festo

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-