FERM JBM1001 Bedienungsanleitung

FERM Schreien JBM1001

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für FERM JBM1001 (48 Seiten) in der Kategorie Schreien. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/48

BOTTLE JACK

MAX. 2000KG

JBM1001

WWW.FERM.COM

Original instructions 03

Übersetzung der Originalbetriebsanleitung 05

Vertaling van de oorspronkelijke gebruiksaanwijzing

Traduction de la notice originale 09

Traducción del manual original 11

Tradução do manual original 13

Traduzione delle istruzioni originali 15

Översättning av bruksanvisning i original 17

Alkuperäisten ohjeiden käännös 19

Oversatt fra orginal veiledning 21

Oversættelse af den originale brugsanvisning 23

Eredeti használati utasítás fordítása 25

Překlad püvodního návodu k používání 27

Preklad pôvodného návodu na použitie 29

Tłumaczenie instrukcji oryginalnej 31

Instrukciju tulkojums no oriģinālvalodas 33

Originalios instrukcijos vertimas 35

Перевод исходных инструкций 37

Переклад оригінальних інструкцій 39

Μετάφραση του πρωτοτύπου των οδηγιών χρήσης

2Ferm

Fig. 1

PKB-2

2.000 kg

1 48 mm

2 116 mm

3 181 mm

3,0 kg

Ferm

HYDRAULIC JACK

The numbers in the following text refer to the

picture on page 2

For your own safety and that of others, we

recommend that you read this instruction

manual carefully before using this

machine. Keep this instruction manual

and the documentation provided with the

saw for future reference.

Know your apparatus

Before attempting to operate the apparatus,

familiarise yourself with the controls and make

sure you know how to stop it quickly in an

emergency.

Contents

1. Safety instructions

2. Using the apparatus

3. Service & maintenance

Technical specifications

Fig. 1

Lpa Sound pressure level <70dB(A)

1. Safety instructions

Explanation of the symbols

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Special safety rules

Non-observance of the following instructions can

cause personal injuries and/or damage to the

vehicle.

• Beforejackingupthecar,makesurethejack

is as near to the wheel to be lifted as possible

and as far under the body or any other point of

support as possible.

• Themaximumloadindicatedonthejackmust

neverbeexceeded.

• Thejackmustbeusedasaliftingdeviceonly.

• Alwaysplacethejackonahardandlevel

surface.

• Alwaysprotectthecarfromrollingaway.

Before jack ing up the car, place chocks behind

and in front of the wheels remaining on the

ground, if necessary. Put the car in first gear or

put on the handbrake to further block the car.

• Makesuretoplacethejackinsuchawaythat

your hand is not underneath the car when

jacking it up.

• Makesurethejackisplacedvertical.

• Foryourownsafety,beforeworkingor

crawling underneath the car jack up the car

and support the shafts.

• Beforeusingtheshaftsupportsmakesure

they are in good condition.

• Shouldthepressureinthejackbecometoo

high,excessairwillescapethroughtherelief

valve.Thereliefvalvehasbeensetinthe

factory.

2. Using the apparatus

Assembling the jacking beam

Telescopebothpartsofthejackingbeam,allowing

the flat side to be used when opening and closing

the cock to lower the jack.

Lifting

• Putthecarin‘1’orengagethehandbrake

and block the wheels to prevent the car from

moving.

• Closethecockbymeansofthejackingbeam.

• Instalthescrewjackintherightplace

(indicated by the car manufacturer).

• Insertthejackingbeamintothejackingpoint

and move the jacking beam up and down.

Shaft supports

• Afterjackingupthecartheshaftsupports

should be installed.

• Lowerthecarbyturningthethescrewofthe

release valve anticlockwise, until the car rests

on the supports. Never work under a car which

only rests on the trolley jack.

Lowering

Fig. 1

When you have finished the job, jack up the car

until the jack stands are free. Remove the jack

stands. Using the jacking beam, very slowly and

counterclockwise open the cock referred to under

3. Service & maintenance

Regular maintenance of the hydraulic

jack prevents unnecessary problems.

Produktspezifikationen

Marke:	FERM
Kategorie:	Schreien
Modell:	JBM1001

Brauchst du Hilfe?

Wenn Sie Hilfe mit FERM JBM1001 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Schreien FERM

FERM FRJ-2000 Bedienungsanleitung

14 Oktober 2024

FERM TJM1008 Bedienungsanleitung

7 August 2024

FERM JBM1001 Bedienungsanleitung

31 Juli 2024

Bedienungsanleitung Schreien

Neueste Bedienungsanleitung für -Kategorien-

Facom DL.19 Bedienungsanleitung

2 September 2024

Linn Kivor Oktal Bedienungsanleitung

31 August 2024

Linn Kivor Index Bedienungsanleitung

31 August 2024

Hamron 601-029 Bedienungsanleitung

28 August 2024

Hamron 601-052 Bedienungsanleitung

28 August 2024

Linn Kivor k Bedienungsanleitung

26 August 2024

T-Rex TMA-9H Bedienungsanleitung

22 August 2024

T-Rex Striker Bedienungsanleitung

22 August 2024

T-Rex TMA-5H Bedienungsanleitung

22 August 2024

T-Rex M50 Bedienungsanleitung

22 August 2024