Fenix TK60 Bedienungsanleitung

Fenix Taschenlampe TK60

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fenix TK60 (3 Seiten) in der Kategorie Taschenlampe. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

TK60 Flashlight

Fenix TK60 is a high- -intensity multi functional flashlight powered by D batteries. The dual switch

system in the front can realize a rapid selection between the four brightness levels and the two

different flashing functions. With a max 800 day extremely long runtime, it - -lumen output a 15and

must be able to meet your needs in various conditions.

Meanwhile the compact design can lessen the volume and decrease the weight of TK60 to the

largest extent. With the perfect combination of the outstanding performance and the enjoyment of

using it, TK60 is the dependable partner when outdoor searching, caving or using as a spare light

for automobiles, etc.

Technical Parameters

General Mode

Flashing Mode

ANSI/FSC

Turbo

High

Mid

Low

Strobe

SOS

OUTPUT

800

LUMENS

350

LUMENS

111

LUMENS

800

LUMENS

111

LUMENS

RUNTIME

4h 16min

12h

40h

400h

DISTANCE

476m

INTENSITY

56628cd

IMPACT

RESISTANT

WATERPROOF

IPX-8 2m ，underwater

EXTRA

FUNCTIONS

ACCESSORIES

Lanyard, spare o- ring and strap

◎ Uses Cree XM-L LED with a lifespan of 50000 hours

◎ Uses four 1.5V (NiD -MH, Alkaline) batteries

◎ 354mm (Length) mm (Diameter) mm(Head) x 40 x 62.5

◎ -407 gram weight (excluding batteries)

◎ Digitally regulated output - maintains constant brightness

◎ Reverse polarity protection, to protect from improper battery installation

◎ Dual switch system in the front, simple and fast operation

◎ Made of durable aircraft- grade aluminum

◎ Premium Type III hard- -anodized anti abrasive finish

◎ Toughened ultra-clear glass lens with anti- reflective coating

Notice: The above-mentioned parameters (tested by four high-quality D Ni-MH batteries with a

measured capacity of 9000mAh in Lab) are approximate and may vary between flashlights,

batteries and environments.

Operation Instruction

The right button switch is a power switch. A single press on it can turn it on/off. The left button

switch is a mode switch;

When turn on the light, it will enter into the default general mode directly. A fast double press on

the power switch can select between the general mode and the flashing mode.

In the general mode, a single press on the mode switch can transfer the brightness levels in the

order of Turbo→Low→Mid→High→Cycle.

In the flashing mode, a single press on the mode button switch can select different flashing

functions in the order of Strobe→SOS→Cycle.

The circuit can memorize any brightness level in the two modes. When turn on the light or transfer

the mode, it will directly enter into the brightness level when switched off.

Battery Specifications

Type

Dimensions

Nominal voltage

Usability

Ni- MH battery

1.2V

Recommended

√

Alkaline battery

1.5V

Usable

√

Non- rechargeable Battery

(Lithium)

1.5V

Usable

√

Rechargeable Battery

(Lithium)

32650

3.7V

Banned

Battery Replacement

Unscrew the tail cap to put in the batteries with the anode side (+) toward the light head, screw the

tail cap and the extension tube back on to test.

Usage and Maintenance

◎ For first use, open the package and screw off the tail cap to attach the extension tube to the

end of the tube. And then put in four batteries with the anode side (+) toward the light head,

screw the tail cap and the extension tube back on to test.

◎ If the light is not used for a couple of days, plea for half a se unscrew the head turn to prevent

slow discharge of the batteries.

◎ The light can be powered by three batteries in emergency. Please screw off the extension tube

from the tube and put in three batteries, screw the tail cap back on to test. However in this

case, the runtime of each brightness level will be shortened.

◎ Please don't disassemble the sealed head, doing so can cause damage to the light and will void

the warranty.

◎ -High power light should use battery with high current discharge capability; We suggest using

high performance Ni-MH rechargeable battery to increase the runtime of this high

intensity light.

◎ Please use battery of high quality, and take out the battery if the flashlight will not be used for

a long time, or it may cause damage from electrolyte leakage or battery explosion.

◎ - -The o ring may be worn out after using for a long time. If it happens, please replace the o ring

with a new one to keep the light properly sealed against water.

◎ Please clean the contacts of your light from time to time, especially if the light flickers or

doesn't light up. There may be several reasons for a flickering or not working light:

Reason A: The battery needs replacing.

Solution: Replace batteries (Please confirm the correct installation of anode and cathode).

Reason B: The threads, PCB board contact or other contacts are dirty.

Solution: Clean the contact points with an alcohol soaked cotton swab.

If the above methods don't work, please contact the distributors and refer to the warranty policy.

Notice: The routine cleaning video can be watched and downloaded through Fenix official website,

please log onto the service channel->'maintenance for light'.

Product Warranty

We will replace products afflicted with manufacturing defects within 15 days of purchase and

repair a light free of charge within 24 months of purchase if problems develop with normal use; if

repair is required after 24 months from the date of purchase, we will charge for parts. The total

repair fee is dictated by the cost of the replaced materials.

Warranty Card Registration

We kindly suggest that you register your guarantee card on the official website of Fenixlight

Limited. You can get an extra six-month warranty period once you have successfully registered.

What's more, you could take part in the lottery of questionnaire at the same time.

Warning

TK60 is a high-intensity lighting device and capable of causing eye damage, avoid shining the

light directly into the eyes.

Produktspezifikationen

Marke:	Fenix
Kategorie:	Taschenlampe
Modell:	TK60

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fenix TK60 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Taschenlampe Fenix

Fenix E35R Bedienungsanleitung

4 September 2024

Fenix PD40R V3.0 Bedienungsanleitung

31 August 2024

Fenix LR40R V2.0 Bedienungsanleitung

31 August 2024

Fenix HT32 Bedienungsanleitung

31 August 2024

Fenix TK75 Bedienungsanleitung

29 August 2024

Fenix TK32 Bedienungsanleitung

29 August 2024

Fenix HT30R Bedienungsanleitung

29 August 2024

Fenix E15 Bedienungsanleitung

29 August 2024

Fenix HL22 Bedienungsanleitung

29 August 2024

Fenix E-Star Bedienungsanleitung

29 August 2024

Bedienungsanleitung Taschenlampe

Neueste Bedienungsanleitung für -Kategorien-

Ledlenser P9R Core LEP Bedienungsanleitung

15 Oktober 2024

Led Lenser P5R Bedienungsanleitung

12 Oktober 2024

Nordride 5110 Spor Smart A Bedienungsanleitung

7 Oktober 2024

Varta 17631 Bedienungsanleitung

7 Oktober 2024

Varta 18803 Bedienungsanleitung

4 Oktober 2024

Brennenstuhl TL 1201 AF Bedienungsanleitung

1 Oktober 2024

Brennenstuhl TL 601 AF Bedienungsanleitung

1 Oktober 2024

Livarno IAN 66776 Bedienungsanleitung

28 September 2024

Klein Tools KHH56308 Bedienungsanleitung

24 September 2024

Goobay 44561 Bedienungsanleitung

22 September 2024