Fenix LD09 Bedienungsanleitung

Fenix Zaklamp LD09

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fenix LD09 (3 Seiten) in der Kategorie Zaklamp. Dieser Bedienungsanleitung war für 3 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/3
Fenix LD09 Flashlight: Ready Reliability
Equipped with the multi- - -function tail switch for momentary on, constant on and output
selection, the Fenix LD09 delivers max 130- Tlumen output from a single AA cell. hree
brightness levels plus SOS function cover situationsfrom hiking, camping to emergency .
Technical Parameters
ANSI/NEMA
FL1
High
Mid
Low
SOS
OUTPUT
130 Lumens
55 Lumens
8 Lumens
55 Lumens
RUNTIME
1h 30min
5h
40h
DISTANCE
88m (Max)
INTENSITY
1950cd (Max)
IMPACT
RESISTANT
1m
WATERPROOF
IPX-8underwater 2m
ACCESSORIES
Body clip, lanyard and spare O-ring
Cree XP-E2 (R3) LED with a lifespan of 50,000 hours
Uses one AA (Ni-MH, Alkaline) battery
92mm (Length) x 19mm (Diameter)
-33 gram weight (excluding the battery)
Digitally regulated output - maintains constant brightness
Reverse polarity protection guards against improper battery installation
Multi- -function tactical tail switch for momentary on, constant-on and output selection
Anti- - roll, slip resistant body design
Made of durable aircraft- grade aluminum
Premium Type III hard-anodized anti abrasive finish-
Toughened ultra-clear glass lens with anti- reflective coating
Notice: The above-mentioned parameters (tested by 2500mAh Ni MH battery in Lab) are -
approximate and may vary between flashlights, batteries, and environments.
Operation
The Fenix LD09 features a tail switch with momentary operation (light press or tap) and
constant on operation (press until click).
Mid: Tap and hold; click to lock on; click again for off.
Low: Fast double-tap (within 1 second) and hold; click to lock on; click again for off.
High: Fast triple-tap (within 1 second per tap) and hold; click to lock on; click again for
off.
SOS: Fast quadruple-tap (within 1 second per tap) and hold; click to lock on; click again
for off.
The flashlight will not memorize the last used brightness level or SOS mode. The next
time you turn the flashlight on (over one second after it is off), it will activate on mid
output.
Battery Specifications
Type
Dimensions
Nominal
Voltage
Ni-MH Battery
AA
1.2V
Alkaline Battery
AA
1.5V
Non- rechargeable Battery
(Lithium)
AA
1.5V
Rechargeable Battery
(Li-ion)
14500
3.7V
×
Rechargeable Battery
(LiFePO4)
14500
3.2V
×
Battery Replacement
Unscrew the bezel completely to insert the battery with the anode side (+) toward the
LED assembly; screw the bezel back on to test.
Usage and Maintenance
Please don't disassemble the sealed head as doing so can cause damage to the
flashlight and will void the warranty.
Use only recommended high performance batteries with this high discharge light: -A Ni
MH rechargeable cell is recommended as alkaline batteries will reduce the flashlight's
runtime.
We recommend the use of high quality batteries. If the flashlight is not to be used for
an extended period, remove the batteries, or the flashlight could be damaged by
electrolyte leakage or battery explosion.
Due to the momentary-on tactical switch, the flashlight may be accidentally activated
when stored, transported or placed in a pocket. Unscrew the tail cap one-half turn or take
out the battery to avoid unwanted operation.
Long- -term use can result in O ring wear. To maintain a proper water seal, replace the
ring with an approved spare.
Periodic cleaning of the battery contacts improves the flashlight’s performance as dirty
contacts may cause the LD09 to flicker, shine intermittently or even fail to illuminate for
the following reasons: Reason A: The battery needs replacing.
Solution: Replace batteries (Please confirm the correct installation of anode and cathode).
Reason B: The threads, PCB board contact or other contacts are dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please refer to the warranty policy before contacting
your authorized distributor.
Notice: The routine cleaning video can be watched and downloaded through Fenix
official website, please log onto the service channel->“Maintenance for light .
Product Warranty
We will replace products afflicted with manufacturing defects within 15 days of purchase
and repair a light free of charge within 24 months of purchase if problems develop with
normal use; if repair is required after 24 months from the date of purchase, we will charge
for parts. The total repair fee is dictated by the cost of the replaced materials.
Product Registration
We kindly suggest that you register your product on the official website of Fenixlight
Limited (www.fenixlight.com).You can get an extra -six month warranty period once you
have successfully registered. By participating in an optional customer survey, you are
entered in a drawing for free Fenix products.
Warning
LD09 is a high intensity lighting device capable of causing eye damage. Avoid shining
the light directly into the eyes.

Produktspezifikationen

Marke: Fenix
Kategorie: Zaklamp
Modell: LD09

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fenix LD09 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Zaklamp Fenix

Bedienungsanleitung Zaklamp

Neueste Bedienungsanleitung für -Kategorien-