Fender KXR 60 Bedienungsanleitung

Fender Tastatur KXR 60

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Fender KXR 60 (7 Seiten) in der Kategorie Tastatur. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/7

Sixty

T H E S O U N T H A T C R E A T E S L E G E N D SD

P/N 049254

Owner,s Manual

KEYBOARD

EXTENDED

RANGE

Your new Fender®KXR 60 Keyboard Ampliﬁer is the result

of Fender’s ongoing dialog with many of today’s top musi-

cians. It uses state of the art technology to deliver clear,

resonant and most importantly... musical sound.

The KXR 60 is actually much more than just a keyboard

amp. With its heavy-duty, Fender®Special Design speaker

and piezo-electric horn, it is a self-contained, portable P.A.

system, suitable for almost any musical instrument requiring

full-range sound reinforcement. This makes the KXR 60

ideal for amplifying electronic keyboards, acoustic/electric

guitar, electric violin or voice. Compact packaging and

medium level output power make the KXR 60 the perfect

full-range instrument ampliﬁer for rehearsal, studio or small

club performances.

The preamp section of the KXR 60 features two indepen-

dent channels, a four band master EQ, Reverb and Master

Volume controls. Each channel features a single 1/4 inch

Input jack and Volume control. The Eﬀects Send and Eﬀects

Return jacks can be used with a wide variety of eﬀects

devices, or as patch points for slaving multiple amps

together. The Eﬀects Send can also be used to connect

your KXR 60 directly to a recording console or sound rein-

forcement mixer. A tape player or drum machine can be

mixed with the preamp signal (pre-eﬀects loop) by using

the Tape In jacks. The Headphones jack automatically

mutes the internal speaker while driving stereo or mono

headphones for private practice sessions.

The KXR 60's rugged 50 watt power ampliﬁer was

designed to give years of quality service under all condi-

tions and is equipped with a unique implementation of our

exclusive DELTACOMPTM adaptive compression system.

With DELTACOMPTM, it is practically impossible to cause

the power ampliﬁer to clip (distort). Also, apparent com-

pressor release time is kept short keeping distortion to a

minimum at low frequencies.

Your selection of a Fender®ampliﬁer will be rewarded with

years of quality performance and a wide range of musical

sounds. The built in quality of your Fender®ampliﬁer is the

result of over four decades of dedication in the combined

skills of research and development by our engineers and

musicians.

That is why we proudly say... Fender®, The Sound That

Creates Legends.

INTRODUCTION

CHANNEL 1 INPUT (1/4" Phone)- Plug-in connection

for instruments. This balanced input can handle as

much as 8V R.M.S.

CHANNEL 1 VOLUME- This control adjusts the pream-

pliﬁer gain of channel 1. It works in conjunction with

the Master Volume control (item H) to set the overall

loudness of the ampliﬁer for Channel 1 only. Being a

true “gain” control, it allows for the use of a variety of

microphones, keyboards or other instruments with dif-

fering output signal levels. Low-level instruments gen-

erally require a higher Channel Volume setting, while

“hotter” keyboards require a lower Channel Volume

setting.

CHANNEL 2 - This channel is provided for an addi-

tional instrument. Its input and volume control operate

in the same manner as items A and B in channel 1.

This channel is muted when nothing is plugged into its

input, and thus will contribute no additional noise to

the ampliﬁer output when left unused. Both channels

may be used simultaneously, however Channel 1

should be used ﬁrst if only one input is needed.

EQUALIZER- The equalizer allows precise adjustments

of the tonal characteristics of the ampliﬁer. Each con-

trol provides a 12 dB boost or cut to bands of frequen-

cies centered about 100, 338, 1188, and 4000 Hz.

REVERB CONTROL- This control adjusts the amount

of reverb to be mixed with the dry signal. The input to

the reverb assembly is the sum of Channels 1 and 2.

EFFECTS SEND JACK- This jack provides an unbal-

anced output signal from the preamp. This output can

be used with the Eﬀects Return jack (item G) as a patch

point for mono eﬀects devices. The Eﬀects Send is

connected to the input of the eﬀect (digital delay or

other eﬀects device) and the output of the eﬀect is con-

nected to the Eﬀects Return jack (Item G). The Eﬀects

Send can also be used to provide a signal to a record-

ing or sound reinforcement mixer. In addition, this

output can be used to drive another KXR 60 used as a

slave amp. This is done by connecting a standard gui-

tar cord from the Eﬀects Send jack of the master amp

to the Eﬀects Return jack of the slave amp.

KXR 60 FRONT PANEL FUNCTIONS

Produktspezifikationen

Marke:	Fender
Kategorie:	Tastatur
Modell:	KXR 60

Brauchst du Hilfe?

Wenn Sie Hilfe mit Fender KXR 60 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Tastatur Fender

Fender KXR 100 Bedienungsanleitung

14 August 2024

Fender KXR 60 Bedienungsanleitung

12 August 2024

Fender KXR 200 Bedienungsanleitung

6 August 2024

Bedienungsanleitung Tastatur

Neueste Bedienungsanleitung für -Kategorien-

Speed-Link VIRTUIS Bedienungsanleitung

14 Oktober 2024

Speed-Link ATMOS Bedienungsanleitung

14 Oktober 2024

Yamaha Electone B-45 Bedienungsanleitung

11 Oktober 2024

Yamaha Portatone PSR-160 Bedienungsanleitung

10 Oktober 2024

Korg SP-250 Bedienungsanleitung

9 Oktober 2024

Lenovo ThinkPad T61 Bedienungsanleitung

7 Oktober 2024

Sven Comfort 7400 EL Bedienungsanleitung

7 Oktober 2024

Sven KB-G9400 Bedienungsanleitung

7 Oktober 2024

Gembird KB-501-B-DE Bedienungsanleitung

6 Oktober 2024

Ewent EW3163 Bedienungsanleitung

5 Oktober 2024