Felt Z series Disc Carbon Bedienungsanleitung

Felt Fiets E-bike Z series Disc Carbon

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Felt Z series Disc Carbon (8 Seiten) in der Kategorie Fiets E-bike. Dieser Bedienungsanleitung war für 8 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/8
ROAD DISC
TECHNICAL
MANUAL
1
INTRODUCTION CONTENTS
NOTE:
This manual is not intended as a
comprehensive use, service, repair, or
maintenance manual. Please see your dealer
for all service, maintenance, and repair.
Your dealer may also be able to refer you to
classes, clinics, or books regarding bicycle
use, service, repair, or maintenance.
CABLE ROUTING
Internal Fork Cable Routing ...................................................................... 2
Mechanical Cable Road Map .................................................................... 4
Di2 Cable Road Map ................................................................................ 5
Mechanical Routing .................................................................................. 6
Di2 Routing ..............................................................................................8
Internal Rear Brake Routing .................................................................... 10
CONTACT INFORMATION
Contact ................................................................................................... 11
Congratulations on purchasing a Felt disc brake equipped
road bike. As with all of our bikes and components, our aim is
to provide the rider with the best product and riding experience.
Read this manual supplement thoroughly, as it’s to
help you set your bike up correctly, and care for it.
For further information, visit:
FELTBICYCLES.COM
32
INTERNAL FORK
ROUTING
Understand that Felt Bicycles recommends
the brake cable is routed from the bottom
up. Begin by inserting the end of the
cable into the lower hole, feeding the
cable through the fork blade toward the
upper hole.
This section view shows the brake
cable entering the lower hole,
traveling up the fork blade and
out the upper hole.
Once the brake cable has exited the upper
cable hole as shown, slide the grommet
over the cable housing and press the rigid
shoulder into the cable hole to firmly hold
the brake cable in place.
The image to the left shows the front brake
cable (pink) successfully routed up through
the lower cable hole. The cable travels
through the fork blade, out of the upper
cable hole, and into the brake lever.
Note: Enough slack is left so the handlebars
can be fully turned in both directions without
interference between cables.
INTERNAL FORK
ROUTING

Produktspezifikationen

Marke: Felt
Kategorie: Fiets E-bike
Modell: Z series Disc Carbon

Brauchst du Hilfe?

Wenn Sie Hilfe mit Felt Z series Disc Carbon benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Fiets E-bike Felt

Bedienungsanleitung Fiets E-bike

Neueste Bedienungsanleitung für -Kategorien-