Extron MDA 5V Bedienungsanleitung

Extron Empfänger MDA 5V

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Extron MDA 5V (5 Seiten) in der Kategorie Empfänger. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/5

User’s Guide

Mini Distribution Amplifiers

68-614-01 Rev. B

Printed in the USA

08 02

VersaTools™ MDA 5V, 5SV,

5A RCA

MDA 5V, 5SV, 5A RCA • Installation

Introduction

The Extron MDA 5 Series of Mini Distribution Amplifiers (MDAs)

are a family of three video and audio distribution amplifiers. The

MDA are members of the Extron VersaTools™ line of basic

distribution amplifiers, switchers, and associated video

accessories.

The MDA 5V distributes buffered composite video, the MDA 5SV

distributes buffered S-video (luminance (Y) and chrominance

(C)), and the MDA 5A RCA distributes amplified stereo audio, on

RCA outputs.

The MDAs ship with external, desktop 12V power supplies,

which accept 100-240VAC input.

Installation

The MDA 5V, 5SV, and 5A RCA can be mounted on a rack shelf,

under a desk or tabletop, or on a projector bracket.

Rack mounting

For optional rack mounting, mount the MDA on a VersaTools 19"

1U Rack Shelf (Extron part #60-190-20) (figure 1) or a standard

Universal 1U Rack Shelf (Extron part #60-190-01) (figure 2). On

the standard rack shelf, the MDA mounts in one of four locations

to the rear of the rack or in one of four locations to the front of the

rack.

Figure 1 — Rack mounting the MDA 5V, 5SV, or 5A

RCA on the VersaTools shelf

1. If feet were previously installed on the bottom of the MDA,

remove them.

2. Mount the MDA on the rack shelf, using two 4-40 x 3/16

screws in opposite (diagonal) corners to secure the MDA to

the shelf.

(2) 4-40 x 3/16" screws

Use 2 mounting holes on

opposite corners

VersaTools Rack Shelf

1/4 Rack Width False Front

Face Plate

TR IB

TION

AM P

LIF IE

TIO

IF IER DIS TR IB

MPL

IF I

MDA 5V, 5SV, 5A RCA • Connections

Installation

2. If feet were previously installed on the bottom of the MDA,

remove them.

3.For furniture mounting, hold the MDA with the attached

brackets against the underside of the table or other

furniture. Mark the location of the screw holes of the

bracket on the mounting surface.

4.For furniture mounting, drill 3/32” (2 mm) diameter pilot

holes, 1/4” (6.3 mm) deep in the mounting surface at the

marked screw locations.

5.For furniture mounting, insert #8 wood screws into the four

pilot holes. Tighten each screw into the mounting surface

until just less than 1/4” of the screw head protrudes.

6.For furniture mounting, align the mounting screws with

the slots in the brackets and place the MDA against the

surface, with the screws through the bracket slots.

7.For furniture mounting, slide the receiver slightly forward

or back, then tighten all four screws to secure the MDA in

place.

8.For projector mounting, secure the MDA to a projector

mount or other surface by inserting the mounting bolt

through the bracket’s slotted hole.

Connections and Indicator

Refer to figure 5.

Video Input connector — (MDA 5V - composite video and

MDA 5SV - S-video) Connect an input to this connector.

Video Outputs (1 through 5) connectors — Connect up to

five video devices to these connectors. (MDA 5V -

composite video and MDA 5SV - S-video).

Power connector— Plug the external 12V power supply

into this 2-pole captive screw connector. The power supply

is included with the unit. Figure 4 shows how to wire the

connector.

CAUTION

When connecting the power supply, voltage polarity

is extremely important. Applying power with

incorrect voltage polarity could damage the power

supply and the MDA. Identify the power cord

negative lead by the ridges on the side of the cord.

Produktspezifikationen

Marke:	Extron
Kategorie:	Empfänger
Modell:	MDA 5V
Produktfarbe:	Grau
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
Eingangsspannung:	100 - 240 V
Bandbreite:	400 MHz
BNC Eingänge:	2
BNC Ausgänge:	5