Extron HDP 101 4K Bedienungsanleitung

Extron Audio/Video-Konverter HDP 101 4K

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Extron HDP 101 4K (10 Seiten) in der Kategorie Audio/Video-Konverter. Dieser Bedienungsanleitung war für 9 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/10

HDP1014K • User Guide

The Extron HDP1014K is a compact, active HDMI to DisplayPort converter for signals

up to 4K 30 Hz @ 4:4:4. It converts HDMI signals for connection to DisplayPort displays

or peripherals. Incoming HDMI signals are equalized up to 15 feet (4 meters) at the input

to compensate for signal loss. The HDP1014K features EDID Minder®, which maintains

continuous EDID communication with connected devices and ensures that the HDMI

source powers up properly and maintains correct video output. Audio information is

passed between source and display.

The HDP1014K supports digital video resolutions of up to 4K/30 at 4:4:4 (or 10.2 Gbps)

and is DisplayPort 1.1, HDMI 1.4, and HDCP 1.4 compliant.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the

FCC rules. The ClassA limits provide reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment

in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.

NOTES:

• This unit was tested with shielded ables on the peripheral devices. Shielded cables must be used to ensure I/O c

compliance with FCC emissions limits.

• For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related

topics, see the on the Extron website.

Extron Safety and Regulatory Compliance Guide

Speciﬁcations

Product specifications are available on the Extron website, www.extron.com.

Features

• Provides connectivity between HDMI sources and DisplayPort displays and peripherals.

• Supports computer and video resolutions up to 4K/30 @ 4:4:4 with data rates up to 10.2 Gbps.

• Supported HDMI speciﬁcation features include data rates up to 10.2 Gbps, 3D, Lip Sync, and HD lossless audio

formats.

• Equalizes incoming HDMI signals up to 15 feet (4 meters) to compensate for signal loss due to low quality cables or

marginal sources.

• EDID Minder automatically manages EDID communication between connected devices — EDID Minder ensures that all

sources power up properly and reliably output content for display.

• Selectable resolutions and refresh rates — Pre-stored EDID is communicated to the source based on a user-selected

resolution and refresh rate.

• EDID capture mode — When connected to a display, the HDP1014K offers the option of capturing and then storing EDID

information from the display device.

• Complies with HDMI and VESA Interoperability Guidelines.

• HDCP 1.4 compliant — The HDP 101 4K ensures display of content-protected media and interoperability with earlier

versions of HDCP-compliant devices.

• LED indicator for signal presence and power — Provides visual indication of system status for real-time feedback and

monitoring of key performance parameters.

• Front panel USB configuration port — Provides convenient access for setup, conguration, and rmware updates.

• Easy setup and commissioning with Extron PCS – Product Configuration Software — Conveniently congure multiple

products using a single software application.

• Compact 1 inch (2.5 cm) high, 2.2 inch (5.6 cm) wide enclosure for discreet placement and mounting in space-

constrained environments — Includes fabric hook and loop tape for easy installation in any application.

HDP 101 4K • User Guide (Continued)

• Includes LockIt® HDMI cable lacing brackets.

• Supports LPCM audio.

• Highly reliable, energy-efﬁcient external universal power supply included — Provides worldwide power compatibility,

with high demonstrated reliability and low power consumption for reduced operating costs.

Application Diagram

Laptop

DisplayPort

Extron

HDP 101 4K

POWER

12V

--A MAX

DP OUT

SIG

HDMI

4K Display

Blu-ray Disc

HDMI to DisplayPort Converter

Figure 1. HDP1014K Application

Mounting

Use the included hook-and-loop tape to attach the HDP1014K to the application surface.

HDP 101 4K • User Guide (Continued)

Cabling

DP OUT

SIG

POWER

12V

0.1A MAX

HDP 1 4K10

CONFIG

HDMI IN

B D

Figure 2. HDP1014K Panels

A Config port — Connect a host computer to this mini-B USB port to configure the HDP1014K.

B HDMI input — Connect an HDMI source device to the HDMI input.

NOTE: Extron recommends using HDMI Pro Series cables for 300 Mhz pixel clock (4K/UHD) signals.

C Power inlet — Wire the external 12 VDC power supply as shown below, and connect it to the two-pole captive screw Power

connector.

SECTION A–A

Ridges

Smooth

Power Supply Output Cord

3/16"

(5 mm) Max.

Figure 3. Wiring the Power Connector

ATTENTION:

• The length of the exposed wires in the stripping process is critical. The ideal length is 3/16 inches (5 mm). Any

longer and the exposed wires may touch, causing a short circuit between them. Any shorter and the wires can be

easily pulled out even if tightly fastened by the captive screws.

• La longueur des câbles exposés est primordiale lorsque l’on entreprend de les dénuder. La longueur idéale est de

5mm (3/16inches). S’ils sont trop longs, les câbles exposés pourraient se toucher et provoquer un court-circuit.

S’ils sont trop courts, ils peuvent être tirés facilement, même s’ils sont correctement serrés par les borniers à vis.

• Always use a power supply supplied by or specied by Extron. Use of an unauthorized power supply voids all

regulatory compliance certication and may cause damage to the supply and the end product.

• Utilisez toujours une source d’alimentation fournie ou recommandée par Extron. L’utilisation d’une source

d’alimentation non autorisée annule toute conformité réglementaire et peut endommager la source d’alimentation

ainsi que l’unité.

• If not provided with a power supply, this product is intended to be supplied by a UL Listed power source marked

“Class2” or “LPS” rated 12 VDC, 0.1 A minimum.

• Si le produit n’est pas fourni avec une source d’alimentation, il doit être alimenté par une source d’alimentation

certiée UL de classe 2 ou LPS avec une tension nominale de 12 Vcc, 0.1 A minimum.

• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling spaces or in wall cavities.

The power supply is to be located within the same vicinity as the Extron AV processing equipment in an ordinary

location, Pollution Degree 2, secured to the equipment rack within the dedicated closet, podium, or desk.

• Sauf mention contraire, les adaptateurs CA/CC ne conviennent pas à une utilisation dans les espaces d’aération

ou dans les cavités murales. La source d’alimentation doit être placée à proximité de l’équipement Extron dans un

emplacement ordinaire soumis à un degré de pollution de catégorie II, solidement xé au rack d’équipement d’une

baie technique, d’un pupitre, ou d’un bureau.

• The installation must always be in accordance with the applicable provisions of National Electrical Code ANSI/

NFPA 70, article 725 and the Canadian Electrical Code part 1, section 16. The power supply shall not be

permanently xed to building structure or similar structure.

• Cette installation doit toujours être conforme aux dispositions applicables du Code américain de l’électricité

(National Electrical Code) ANSI/NFPA 70, article 725, et du Code canadien de l’électricité, partie1, section16.

La source d’alimentation ne devra pas être xée de façon permanente à une structure de bâtiment ou à une

structure similaire.

D DP output — Connect a DisplayPort device to the DP output.

A Config port

B HDMI input

C Power inlet

D DP output

Produktspezifikationen

Marke:	Extron
Kategorie:	Audio/Video-Konverter
Modell:	HDP 101 4K
Breite:	56 mm
Tiefe:	76 mm
Gewicht:	100 g
AC-Netzadapter:	Ja
Produktfarbe:	Grau
Höhe:	25 mm
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Zertifizierung:	CE, c-UL, C-tick, FCC A, ICES, VCCI, RoHS, UL, WEEE
Stromverbrauch (Standardbetrieb):	1.4 W
Warentarifnummer (HS):	85176990
Gehäusematerial:	Metall
Temperaturbereich bei Lagerung:	-40 - 70 °C
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
Anzahl:	1
HDCP:	Ja
Unterstützte Video-Modi:	1600p, 2160p
Maximale Video-Auflösung:	4096 x 2160 Pixel
Eingangsspannung:	100-240 V
Eingangsfrequenz:	50-60 Hz
Arbeitsspannung:	12 V
Bandbreite:	10.2 Gbit/s
Hostschnittstelle:	HDMI
Farbtiefe:	8 Bit
Ausgangsschnittstelle:	DisplayPort
Operatierender Strom:	0.5 A
Unterstütze Auflösung:	2560x1600, 3840x2160, 4096x2160