Extron CCI Pro 700 Bedienungsanleitung

Extron Videokonferenzsystem CCI Pro 700

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Extron CCI Pro 700 (34 Seiten) in der Kategorie Videokonferenzsystem. Dieser Bedienungsanleitung war für 32 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/34

User Guide

CCI Pro 700

TouchLink®

TouchLink Pro Conference Room Control Interface

68-2785-01 Rev. C

09 17

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within

the product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended

to alert the user of important operating and maintenance (servicing)

instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF

compatibility, accessibility, and related topics, see the Extron Safety and

Regulatory Compliance Guide, part number 68-290-01, on the Extron

website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer

darauf aufmerksam machen, dass im Inneren des Gehäuses dieses

Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und

die einen elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in

der im Lieferumfang enthaltenen Dokumentation besonders wichtige

Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,

EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in

den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer

68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del

producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y

mantenimiento recogidas en la documentación proporcionada con el

equipo.

Para obtener información sobre directrices de seguridad, cumplimiento

de normativas, compatibilidad electromagnética, accesibilidad y temas

relacionados, consulte la Guía de cumplimiento de normativas y seguridad

de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du

produit d’une tension électrique dangereuse susceptible de provoquer

un choc électrique.

ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance

importantes qui se trouvent dans la documentation fournie avec le

matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la

réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets

connexes, lisez les informations de sécurité et de conformité Extron, réf.

68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di tensione non isolata pericolosa

all’interno del contenitore del prodotto che può costituire un rischio di

scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad

avvertire l’utente della presenza di importanti istruzioni di funzionamento

e manutenzione nella documentazione fornita con l’apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,

compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento

alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo

68-290-01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, gdy używany na produkt, ma na celu ,

poinformować użytkownika o obecności izolowanego i niebezpiecznego

napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie

porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do

ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji

(obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji

wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,

zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część

numer 68-290-01, na stronie internetowej Extron, www.extron.com.

Инструкция по технике безопасности Русский•

ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан

на продукте, предупреждает пользователя о наличии

неизолированного опасного напряжения внутри корпуса

продукта, которое может привести к поражению электрическим

током.

ВНИМАНИЕ: Данный символ, , если указан на продукте,

предупреждает пользователя о наличии важных инструкций

по эксплуатации и обслуживанию в руководстве,

прилагаемом к данному оборудованию.

Для получения информации о правилах техники безопасности,

соблюдении нормативных требований, электромагнитной

совместимости (ЭМП/ЭДС), возможности доступа и других

вопросах см. руководство по безопасности и соблюдению

нормативных требований Extron на сайте Extron: ,

www.extron.com, номер по каталогу - 68-290-01.

安全说明 •简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，

有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问网站 Extron , www.extron.com，参见

Extron 68-290-01 安全规范指南，产品编号。

安全記事 • 繁體中文

警告:若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有

重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資

訊，請瀏覽 Extron 網站：

www.extron.com，然後參閱《Extron 安全性與法規

遵守手冊》，準則編號 68-290-01。

安全上のご注意 • 日本語

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意:この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの注意

を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に

ついては、エクストロンのウェブサイト www.extron.com より『Extron Safety

and Regulatory Compliance Guide P/N 68-290-01』 ( ) をご覧ください。

안전 지침 • 한국어

경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을

경고합니다.

주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에

대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및

규제 준수 안내서, 68-290-01 조항을 참조하십시오.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks(®)

, registered service marks(SM)

, and trademarks(™) are the property of RGB Systems, Inc. or Extron

Electronics (see the current list of trademarks on the Terms of Use www.extron.com page at ):

Registered Trademarks (®)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, GlobalCongurator,

GlobalScripter, GlobalViewer, Hideaway, IPIntercom, IPLink, KeyMinder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA,

PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, SystemINTEGRATOR, TeamWork,

TouchLink, V-Lock, VideoLounge, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, and XTPSystems

Registered Service Mark

(SM) : S3 Service Support Solutions

Trademarks (™)

AAP, AFL (Accu-Rate Frame Lock), ADSP (Advanced Digital Sync Processing), Auto-Image, CableCover, CDRS (ClassD Ripple

Suppression), Codec Connect, DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), DriverCongurator,

DSPCongurator, DSVP (Digital Sync Validation Processing), eLink, Entwine, EQIP, EverLast, FastBite, FOX, FOXBOX, HyperLane,

IPIntercom HelpDesk, MAAP, MicroDigital, Opti-Torque, ProDSP, QS-FPC (QuickSwitch Front Panel Controller), Room Agent,

Scope-Trigger, ShareLink, Show Me, SIS, SimpleInstructionSet, Skew-Free, SpeedNav, StudioStation, Triple-Action Switching, True4K,

Vector™ 4K, WebShare, XTRA, ZipCaddy, and ZipClip

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable

protection against harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a

residential area is likely to cause interference. This interference must be corrected at the

expense of the user.

NOTE: For more information on safety guidelines, regulatory compliances,

EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and

Regulatory Compliance Guide” on the Extron website.

Battery Notice

This product contains a battery. Do not open the unit to replace the battery. If the battery

needs replacing, return the entire unit to Extron (for the correct address, see the Extron

Warranty section on the last page of this guide).

CAUTION: Risk of explosion. Do not replace the battery with an incorrect type. Dispose

of used batteries according to the instructions.

ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile.

Débarrassez-vous des piles usagées selon le mode d’emploi.

Conventions Used in this Guide

Notiﬁcations

The following notications are used in this guide:

ATTENTION:

• Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

NOTE: For commands and examples of computer or device responses mentioned

in this guide, the character “ ” is used for the number zero and “ ” is the capital

letter “ .”

Computer responses and directory paths that do not have variables are written in the

font shown here:

Variables are written in slanted form as shown here:

Selectable items, such as menu names, menu options, buttons, tabs, and eld names

are written in the font shown here:

From the menu, select .

Click the button.

Specifications Availability

Product specications are available on the Extron website, www.extron.com.

Extron Glossary of Terms

A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Contents vii

Contents Contents

Conﬁguration Software .............................. 18

Conﬁguration Software Programs 18 .....................

Software Descriptions 18 ...................................

Software Overview 19 ........................................

Software Download 19 ......................................

Software Installation 20 ......................................

Internal Web Page 20 ............................................

Web Page Access 20 ........................................

License Information 21 ......................................

Firmware Updates 21 ........................................

Reference Information ............................... 22

Mounting 22 ..........................................................

Network Port Requirements.............................. 22

Button Replacement 22 .........................................

Reset Modes 24 ....................................................

Firmware Download 25 ..........................................

Introduction ................................................... 1

Guide Overview 1 ..................................................

Product Description 1 ............................................

Features 1 .............................................................

Application Diagram 2 ...........................................

Installation Overview .................................... 3

Panel Features .............................................. 5

Front Panel Features 5 ...........................................

Rear Panel Features 6 ...........................................

Rear Panel Access 6 .........................................

Rear Panel Buttons and Connector 7 ................

Cable Routing 10 ...............................................

Setup Menu.................................................. 11

Navigation and Data Entry 11 ................................

Setup Menu System 12 .........................................

Status Submenu 12 ...........................................

Network Submenu 13 ........................................

Display Submenu.......................................... 14

Audio Submenu 15 ............................................

Advanced Submenu 16 .....................................

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Contents viii

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Introduction 1

Introduction

This section contains basic information about the Extron CCI Pro 700 TouchLink Pro

Conference Room Control Interface. Topics in this section include:

• Guide Overview

• Product Description

• Features

• Application Diagram

Guide Overview

This guide contains information about installing, operating, and configuring the CCI Pro 700

TouchLink Pro Conference Room Control Interface. In this guide, the terms “CCI Pro 700”

and “interface” refer to the CCI Pro 700 TouchLink Pro Conference Room Control Interface.

Product Description

The CCI Pro 700 is control system user interface optimized for conferences, collaboration,

and AV control. It supports many critical functions needed in a conference environment,

while providing a powerful and intuitive user interface for room control. The compact

CCI Pro 700 includes a 3.5 inch color information display, a numeric keypad, and backlit

buttons. The information display is customized using GUI Designer, and all buttons can be

configured and customized using Global Configurator Plus and Professional, and Custom

Button Builder.

Features

• Fully configurable — Controls conference systems and AV devices from a single

interface.

• Audio, video, and Web integration — Works seamlessly with virtually any audio,

video, or Web conference solution.

• IP Link Pro control processor compatibility — Directly communicates with any

IP Link Pro control processor via Ethernet.

• Customizable 3.5 inch color information display with context-dependent

buttons — Displays contact information, dialing directories, and call status.

• Six customizable function buttons — Control AV devices or call presets. Buttons

are included with labels for display on, display off, and source selection. Create custom

labels and order custom buttons by using Custom Button Builder.

• Dual color call status indicator — Shows various conference room conditions such

as microphone mute, privacy, or an incoming call.

• Configurable buttons — Control critical conference functions. These backlit buttons

for volume, navigation, call mode, keypad, and room and conference functions are

grouped for easy user operation of the conference environment.

• Power over Ethernet (PoE) — Allows the interface to receive power and control over

a single Ethernet cable, eliminating the need for a local power supply (PoE injector sold

separately).

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Introduction 2

• Light sensor — Adjusts screen and button brightness as the ambient room lighting

changes.

• Adjustable sleep timer — Puts the interface into Sleep mode to save energy when

not in use.

• Motion detector — Wakes the interface from Sleep mode when motion is detected

near the interface.

• Extron control system software — Fully configures the interface. GUI Designer

configures the LCD screen layout. Global Configurator Plus and Professional configure

the button functions.

• Support for Extron Control App and Extron Control for Web

• Pull-out tray — Provides easy access to reminders or system information, such as

contact numbers or system presets.

• Section 508 compliance — Meets or exceeds Section 508 accessibility standards.

Application Diagram

AXP 50 C AT

RESET

2 3 4 5

IN G

POWER

12V

1.0A MAX

0102 IN G 01 02 IN G 0 1 02 IN G 0102 IN G 010 2

2 3 4 5

234

I/OINPUTS

100-24 0V ~ 0.7A MAX

50/60 Hz LANEXP

RS-23 2

Tx Rx G

RESET

MIC +4 8V

5 6 7 8

1 2 3 4 8

4 1

1 2 3 4 5 G 6

1234

7 8 9 G10

11 12 13 14 15 1617 18 19 20G G

2 3 4

5 6 7 8

9 10

11 127

MIC/LINE INPUTS

OUTPUTS

DIGITAL I/O

REMOTE AT

DMP 128 C AT

100-240V 0.5 A, 5 0-60 Hz XPA 2001-70V

LIMITER/PROTECT

SIGNAL 0

81012

∞

ATTENUA TION H PF 70 V OUTPUT

REMOTE

INPUTS

CLASS 2 WIRING

GCV

(SUMMED)

10V

80 Hz

OFF

50mA

STANDBY

100-240V 0.5 A, 5 0-60 Hz XPA 2001-70V

LIMITER/PROTECT

SIGNAL 0

81012

∞

ATTENUA TION H PF 70 V OUTPUT

REMOTE

INPUTS

CLASS 2 WIRING

GCV

(SUMMED)

10V

80 Hz

OFF

50mA

STANDBY

100-240V 0.5 A, 5 0-60 Hz XPA 2001-70V

LIMITER/PROTECT

SIGNAL 0

81012

∞

ATTENUA TION H PF 70 V OUTPUT

REMOTE

INPUTS

CLASS 2 WIRING

GCV

(SUMMED)

10V

80 Hz

OFF

50mA

STANDBY

100-240V 0.5 A, 5 0-60 Hz XPA 2001-70V

LIMITER/PROTECT

SIGNAL 0

81012

∞

ATTENUA TION H PF 70 V OUTPUT

REMOTE

INPUTS

CLASS 2 WIRING

GCV

(SUMMED)

10V

80 Hz

OFF

50mA

STANDBY

100-240V 0.5 A, 5 0-60 Hz XPA 2001-70V

LIMITER/PROTECT

SIGNAL 0

81012

∞

ATTENUA TION H PF 70 V OUTPUT

REMOTE

INPUTS

CLASS 2 WIRING

GCV

(SUMMED)

10V

80 Hz

OFF

50mA

STANDBY

LANLAN

POWER

12V

0.7A MAX

Rx GTx

RS-232 IR

XTP R HDMI

RxTx

-+ -+-+

1 2

AUDIO

RESET

LAN

OVER XTP OUTPUTS RELAYS

SIG LINK

XTP IN HDMI

OFF

S/ PDIF

POWER

12V

0.7A MAX

Rx GTx

RS-232 IR

XTP R HDMI

RxTx

-+ -+-+

1 2

AUDIO

RESET

LAN

OVER XTP OUTPUTS RELAYS

SIG LINK

XTP IN HDMI

OFF

S/ PDIF

eBUS

FLEX I/ORELAYSIR/SERIALCOM12 VDC

LAN

+VTxRx Tx Rx TxRx Tx Rx G G G G S G S G S G S GRTSCTS

+ - + -

+ - + - -S G

PW R OUT = 12 W

S G S G S G S GTxRx Tx Rx TxRx Tx RxG G G G RTSCTS

1 2 3 4 G

1 2 3 4

5 6 7 8

1 1 2 3 4

5 6 7 8

2 3 7

4 5 6 8

1 2

100-240V ~ 50-60Hz

5A MAX

SWITCHED 12 VDC

40W MAX TOTAL

IPCP PRO 550

AUDIO

PRIMARY

REDUNDANT

VIDEO

I/O

POWER

CONTROL

ENTER PRESET VIEW ESC

INPUTS

OUTPUTS

1 2 3 4 5 6 7 8 9 10 11 12 14 15 1613

XTP CROSS POINT 1600

XTP SERIES DIGITAL MATRIX S WITCHER

CONFIG

STANDB Y /ON

PQLS HDMI OPEN/CLOS E FL O FF

USB

PUSH PUSH

POWER MEN U RESGUIDE 480 480p720p 1080i 1080p DIRECT V H D

SELECT

DIRECTV

_,@

GHI

PQRS

DEF

MNO

WXYZ

ABC

JKL

TVU

OPER

DVD / VH S

AUTO I MAGE

MP 3

REC EI VER

HEL P

FLASH

REDIAL

_,@

GHI

PQRS

DEF

MNO

WXYZ

ABC

JKL

TVU

OPER

DVD / VH S

AUTO I MAGE

MP 3

REC EI VER

HEL P

FLASH

REDIAL

Dante

Net work

Extron

XPA 2001-70V

Power Ampliers

Extron

SI 3CT LP

Full-Range

Speakers

Extron

DMP 128 C AT

Digital Matrix

Processor

Wireless

Microphones

Blu-ray Player

Satellite Receiver

Extron

XTP CrossPoint 1600

Modular Digital Matrix

Switcher

Cameras

Video

Conference

Codec

Extron

XTP R HDMI

Receiver

Extron

XTP R HDMI

Receiver

Projector

RS-232

Ethernet Ethernet

Ethernet

Ext ron

IPCP Pro 550

IP Link Pro Control

Processor

Ext ron

TLP Pro 1220TG

12" Tabletop

TouchLink Pro

Touchpanel

Extron

CCI Pro 700

TouchLink Pro

Conference Room

Control Interface

Document

Camera

TCP/IP

Network

Extron

AXP 50 C AT

Audio Expansion Processor

(Audio Expansion Typical of 5)

Table Microphones with Mute and Light Control

Digital I/O Control

Figure 1. Typical Application Diagram

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Installation 3

Installation Overview

This section contains basic installation procedures.

1. Before starting, download (www.extron.com) and install the latest versions of the

following software:

• Global Configurator Plus and Professional (GC) — For configuring button

actions and functions of the interface.

NOTES:

• Global Conﬁgurator Plus and Professional operates in either Plus mode or

Professional mode.

• Global Conﬁgurator Professional access requires Extron Control

Professional certiﬁcation.

• Global Scripter (GS) — This is an alternative to Global Configurator Plus and

Professional for programming the button actions and functions of the interface.

• GUI Designer — For designing or adjusting LCD screen layouts.

You might also want to download a customized system template. Extron has created a

number of system templates, available for free from the CCI Pro 700 product page on

the Extron website. Each template is customized for use with a specific model of audio

or video conferencing codec. It includes the driver for the codec, a GUI layout template

for the CCI Pro 700, and configurations for the buttons and screen.

2. Obtain the following network information from your network administrator:

• DHCP status (on or off) — If DHCP is off, obtain the following:

• IP address

• Subnet mask

• Gateway

3. Mount and cable the units:

a. Mount the unit on a flat surface (see Mounting on page22).

b. Remove the CCI Pro 700 from the base to access the rear panel (see Rear Panel

Access on page6).

c. Route an Ethernet cable through the opening in the base (see Cable Routing on

page10).

d. Connect an Ethernet cable from the network to the interface (see Rear Panel

Buttons and Connector on page7).

NOTE: If necessary, use a power injector along the Ethernet cable run to apply

power.

e. Attach the base to the rear panel of the interface.

4. Use the setup menu to initially set up the interface (see Setup Menu on page11).

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Installation 4

5. If using Global Configurator Plus and Professional to set up the system, either:

• Download a GC system template project (as mentioned in step 1), start Global

Configurator, open the template project, and configure the rest of the system as

desired. The embedded GUI layout can be exported, modified in GUI Designer, then

imported back into the GC project.

• Create a layout for the interface using GUI Designer. Start a project in Global

Configurator. Import the GUI layout to the project and use GC to configure the

interface.

6. If using Global Scripter to set up the system, create a layout for the interface using

GUI Designer then start Global Scripter. Import the GUI layout, program the control

processor and interface, and program button functions.

7. Save the GC project or GS script file.

8. Upload Global Configurator or Global Scripter files to the CCIPro700 interface.

9. Test the system to verify that the button actions and LCD screen are working as

configured.

10. Make adjustments to the configuration or programming if needed and upload the

revised file to the interface.

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Panel Features 5

Panel Features

This section contains enclosure features. Topics in this section include:

• Front Panel Features

• Rear Panel Features

Front Panel Features

The CCI Pro 700 comes with installed buttons for common functions (see Button Replacement

on page22 for information on changing the buttons). However, button functions are

not assigned until configured in Global Configurator Plus and Professional (see the Global

Configurator Help file). See figure 2 for front panel features and common button functions.

DEF

MNO

WXYZ

ABC

JKL

TUV

OPER

PQRS

GHI

FLASH

REDIAL

A (see below)

LCD screen

B Volume button (see below)

C (see below)

Ambient light sensor

D (see below)

Context buttons

E (see below)

Optional buttons

F (see page 6)

Dial buttons

G (see page 6)

Mic mute button

H (see page 6)

Number keypad buttons

I (see page 6)

Navigation buttons

J Transmit LED indicator (see page 6)

K (see page 6)

Function buttons

L (see page 6)

Motion sensor

M (see page 6)

Pull-out tray

N (see page 6)

Status indicator

Figure 2. Front Panel Features

A — A 320x240, 3.5 inch diagonal color screen.LCD screen

B Volume button — Controls volume.

C — Detects room lighting changes and adjusts button and Ambient light sensor

screen illumination levels accordingly.

D — Select specific options on the bottom of the LCD screen or in the Context buttons

setup menu.

E — Can be configured for any included button label.Optional buttons

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Panel Features 6

F — Start or end conference calls (see Dial buttons figure 2, F on the previous page).

G — Mutes or unmutes conference room microphones (see Mic mute button G on the

previous page).

H — Consist of alphanumeric characters for dialing phone Number keypad buttons

numbers or entering values (see H).

I — Navigate the setup menu, on-screen menus, and lists created Navigation buttons

in the GUI. These buttons include the ( ), ( ), ( ), and ) > < ◄ (►

buttons as well as the ] button (see I).

J Transmit LED indicator — Lights according to function button activity (see J).

K — Select inputs or other configurable functions (see Function buttons K).

L — Detects motion and wakes the panel from Sleep mode (see Motion sensor L).

M — Houses important information (see Pull-out tray M).

N — Lights green or red for various conference call conditions, such as Status indicator

active conference calls or a muted microphone (see N).

Rear Panel Features

Rear Panel Access

To access the rear panel, remove the CCI Pro 700 from the base as follows:

1. Firmly hold the base and lift up the tab on the top of the CCI Pro 700 to dislodge the

CCI Pro 700 from the base.

Base

Interface

Figure 3. Pulling the Tab

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Panel Features 7

2. Carefully lift the CCI Pro 700 away from the base.

Figure 4. Removing the CCI Pro 700 From the Base

Rear Panel Buttons and Connector

Remove the device from the base to access the rear panel features (see Rear Panel

Access on the previous page).

MENU RESET

ABC

A (see below)LAN and Power over Ethernet (PoE) connector

B (see page 9)

Menu button

C (see page 9)

Reset button and LED

Figure 5. Rear Panel Features

A — Connect a twisted pair cable to LAN and Power over Ethernet (PoE) connector

this RJ-45 connector (see figure 5, A above). The Ethernet cable can be terminated as

a straight-through cable or a crossover cable (see figure 6 on the next page).

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Panel Features 8

12345678

RJ-45 Connector

Insert T

wisted

Pair Wires

Pins:

Side View

Straight-through Cable

End 1 End 2

Pin Wire Color Pin Wire Color

1 white-orange 1 white-orange

2 orange 2 orange

3 white-green 3 white-green

4 blue 4 blue

5 white-blue 5 white-blue

6 green 6 green

7 white-brown 7 white-brown

8 brown 8 brown

Crossover Cable

End 1 End 2

Pin Wire Color Pin Wire Color

1 white-orange 1 white-green

2 orange 2 green

3 white-green 3 white-orange

4 blue 4 blue

5 white-blue 5 white-blue

6 green 6 orange

7 white-brown 7 white-brown

8 brown 8 brown

Figure 6. RJ-45 Connector Pinout Tables

Plug one end of the cable into the RJ-45 connector and the other end into a network

switch, hub, or router that is connected to an Ethernet LAN or the Internet. An Extron

IPLinkPro control processor must also be connected to the same network domain.

The network port has two LEDs. The green LED lights when a network connection is

established. The yellow LED blinks when data is passed to or from the interface.

ATTENTION: The CCI Pro 700 is Power over Ethernet (PoE IEEE 802.1af, class 3)

compliant. Do not connect power before reading the Attention notiﬁcation on

page 9.

ATTENTION : Le CCI Pro 700 est compatible avec l’alimentation POE via Ethernet

(PoE 802.3af, classe 3). Ne branchez pas de sources d’alimentation externes

avant d’avoir lu les mises en garde sur .

page 9

NOTE: Power over Ethernet is required to power the device.

To use a power injector, connect a straight-through Ethernet cable to the power supply

and a switch or router. This cable carries network information from the switch or router

to the power injector input. Connect a second straight-through cable between the

power injector and the CCI Pro 700 to carry the network information and 48VDC from

the power injector to the interface. Connect the IEC power cord to a convenient

100 VAC to 240 VAC, 50-60 Hz power source.

Figure 7 below shows the Extron XTP PI 100. Your power injector may look different.

100-240V

50-60 Hz

0.4A MAX

XTP

PWR

XTP PWR

To a

network switch

To the

CCI Pro 700

Figure 7. Connecting the Power Injector

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Panel Features 9

ATTENTION:

• The CCI Pro 700 is intended for connection to a Power over Ethernet circuit for

intra-building use only and are considered to be part of a Network Environment

0 per IEC TR62101.

• Le CCI Pro 700 est conçu pour une connexion à un circuit PoE pour une

utilisation intérieure seulement et est considéré comme faisant partie d’un

environnement réseau 0 par IECTR62101.

• This product is intended for use with a UL Listed power source marked

“Class 2” or “LPS” and rated 48 VDC (PoE), minimum 0.35 A.

• Ce produit est destiné à une utilisation avec une source d’alimentation listéeUL

avec l’appellation «Classe2» ou «LPS» et normée 48Vcc (PoE), 0,35A

minimum.

• Power over Ethernet (PoE) is intended for indoor use only. It is to be connected

only to networks or circuits that are not routed to the outside plant or building.

• L’alimentation via Ethernet (PoE) est destinée à une utilisation en intérieur

uniquement. Elle doit être connectée seulement à des réseaux ou des circuits

qui ne sont pas routés au réseau ou au bâtiment extérieur.

• The installation must always be in accordance with the applicable provisions of

National Electrical Code ANSI/NFPA 70, article 725 and the Canadian Electrical

Code part 1, section 16.

• Cette installation doit toujours être en accord avec les mesures qui s’applique

au National Electrical Code ANSI/NFPA70, article725, et au Canadian

Electrical Code, partie1, section16.

• The power supply shall not be permanently ﬁxed to building structure or similar

structure.

• La source d’alimentation ne devra pas être ﬁxée de façon permanente à une

structure de bâtiment ou à une structure similaire.

B — Press this button (see Menu button figure 5, B on page 7) to open the setup

menu on the LCD screen (see on page11). To access the recessed

Setup Menu

button, use an Extron Tweeker or small screwdriver.

C — Press this button (see Reset button and LED figure 5, C on page 7) to reset

the CCI Pro 700 (see on page24). To access the recessed button,

Reset Modes

use an Extron Tweeker or small screwdriver.

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Panel Features 10

Cable Routing

1. Remove the CCI Pro 700 from the base (see on page6).Rear Panel Access

2. Pull the twisted pair cable through the opening at the bottom of the base (see figure 8).

Figure 8. Routing Cable through the Base Opening

3. Connect the cable to the LAN and PoE connector (see figure 5, A on page 7)

4. Route the cable around the guides of the CCI Pro 700 as shown in figure 9, below.

Figure 9. Routing Cable along the Rear Panel

5. Reattach the CCI Pro 700 to the base.

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Setup Menu 11

Setup Menu

This section contains basic setup information using the setup menu system. Topics in this

section include:

• Navigation and Data Entry

• Setup Menu System

Navigation and Data Entry

• Menu button — Press the button (see figure 5, B on page 7) to access or

exit the setup menu.

• Directional Navigation buttons — Press the (>), (<), ( ), and ◄

( ►) buttons (see ,

figure 2 I on page 5) to move between

elements on the LCD screen. When editing text, press the and buttons

to move the cursor. When adjusting numeric values, press the and buttons

to increase or decrease the value by one step respectively. Pressing and holding either

button changes the values at an increased rate.

• ] ] Navigation button — Press the button (see figure 2, I) to

select an item.

• Context buttons — Press the context button (see figure 2, C) directly below

options displayed in the bottom menu of the LCD screen (see figure 2, A) to perform

additional actions.

• Keypad — Press the alphanumeric keypad buttons (see figure 2, H) to set values.

Numbers or letters can be entered depending on the fields. To enter numeric values,

press the desired number keypad button.

NOTE: If letters or numbers can be entered into the same field, pressing the same

keypad button multiple times in succession changes a number to a letter. To enter

the same number multiple times in a row, pause between button presses.

To enter letters, note the groups of letters on the keypad buttons and press the button

repeatedly until the desired letter appears on the LCD screen.

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Setup Menu 12

Setup Menu System

The setup menu contains four submenus for configuring the CCI Pro 700 and one to display

information about the CCI Pro 700. The available submenus include:

• Status Submenu

• Network Submenu

• Display Submenu

• Audio Submenu

• Advanced Submenu

To navigate between submenus, press the > or < button to highlight a

submenu and press the button to select it.]

Status Submenu

This submenu (see figure 10) displays basic information about the CCI Pro 700 and is read-

only. By default, pressing the button on the rear panel displays this submenu first.

• Model — Displays the model name

of the interface.

• Part number — Displays the part

number of the interface.

• Firmware version — Displays the

current firmware version.

• Power over Ethernet status —

Displays the status of the power

over Ethernet connection.

Figure 10. Status Submenu

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Setup Menu 13

Network Submenu

This submenu (see figures 11 and 12) contains options to configure network settings.

Network settings can be assigned automatically with Dynamic Host Configuration Protocol

(DHCP) or manually by specifying an IP address, subnet mask, gateway address, and

Domain Name Server (DNS) IP address obtained from the network administrator. To finalize

pending changes, press the button directly below . To cancel pending

changes, click the button directly below .

Figure 11. Network Submenu — Page 1

• DHCP — Press the or button to enable or disable dynamic host ◄ ►

configuration protocol (DHCP) (the default is disabled). When enabled, only the host

name can be changed.

• Host name — If DHCP mode is enabled, press the button to edit ]

the host name (63 character maximum). Use the and buttons to ◄ ►

move the cursor position and the to enter values.

NOTE: Use the button to enter a dash ( ) character.

• IP address — Press the button to edit the IP address. Use the ]◄

and buttons to move the cursor position and the to enter ►

values. The range is to 255.255.255.255 (the default is 192.168.254.251).

NOTE: Use the button to enter a period ( ) character.

• Subnet mask — Press the button to edit the subnet mask. Use the ]

◄ ► and buttons to move the cursor position and the to enter

values. The range is to 255.255.255.255 (the default is 255.255.255. ).

NOTE: Use the button to enter a period ( ) character.

• Gateway address — Press the button to edit the gateway address. ]

Use the and buttons to move the cursor position and the ◄ ►

to enter values. The range is to 255.255.255.255 (the default is ).

NOTE: Use the button to enter a period ( ) character.

CCI Pro 700 TouchLink Pro Conference Room Control Interface • Setup Menu 14

Figure 12. Network Submenu — Page 2

• DNS (IP) — Press the button to edit the DNS address. Use the ]

◄ ► and buttons to move the cursor position and the to enter

values. The range is to (the default is ).

• Domain name — Displays the domain name.

• MAC address — Displays the MAC hardware address of the interface.

Display Submenu

This submenu (see figure 13) contains settings to adjust the display and sleep timer.

Figure 13. Display Submenu

• Auto brightness mode — Press the or button to enable or ◄ ►

disable the auto brightness feature. When enabled, the LCD screen and button

illumination levels are automatically adjusted to the amount of ambient room light.

• Brightness level — Press the and buttons to select the brightness ◄ ►

level of the LCD screen. When this is set, the auto brightness feature is disabled.

• Sleep timer mode — Press the or button to enable or disable ◄ ►

sleep mode. Sleep mode activates after a certain amount of time of inactivity passes.

The time is determined by the sleep timeout setting.

To deactivate Sleep mode after it has been activated, perform one of the following:

• Press a button on the front panel.

• With wake on motion mode enabled, make a motion near the device.

• Sleep timeout period — Press the and buttons to select the ◄ ►

period of inactivity (in minutes) required to activate sleep mode.

Produktspezifikationen

Marke:	Extron
Kategorie:	Videokonferenzsystem
Modell:	CCI Pro 700
Touchscreen:	Ja
Bildschirmdiagonale:	3.5 "
Breite:	201 mm
Tiefe:	173 mm
Gewicht:	1100 g
Produkttyp:	Multipoint Control Unit (MCU)
Produktfarbe:	Schwarz
Höhe:	89 mm
Eingebautes Display:	Ja
Betriebstemperatur:	0 - 50 °C
Relative Luftfeuchtigkeit in Betrieb:	10 - 90 %
Verpackungsbreite:	279 mm
Verpackungstiefe:	140 mm
Verpackungshöhe:	279 mm
Paketgewicht:	1470 g
Unterstützte Netzwerkprotokolle:	DHCP, DNS, HTTP, HTTPS, ICMP, SFTP, SSH, TCP/IP, UDP/IP
Zertifizierung:	CE, c-UL, UL, C-tick, FCC A, ICES, VCCI
Display:	LED
Stromverbrauch (Standardbetrieb):	10.7 W
Anzahl Ethernet-LAN-Anschlüsse (RJ-45):	1
Kontrastverhältnis:	350:1
Ethernet LAN Datentransferraten:	10, 100 Mbit/s
Temperaturbereich bei Lagerung:	-20 - 60 °C
Luftfeuchtigkeit bei Lagerung:	10 - 90 %
Megapixel (ca.):	- MP
Größe des Bildsensors:	- "
Anzahl der Personen:	- Person(en)
Speicherkapazität:	512 MB
Gesamtspeicherkapazität:	0.5 GB
Speichermedien Typ:	Flash
Display-Auflösung:	320 x 240 Pixel
Ethernet/LAN:	Ja