Extralife Instruments Super Sixteen Bedienungsanleitung

Extralife Instruments Nicht kategorisiert Super Sixteen

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Extralife Instruments Super Sixteen (15 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 6 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/15

extralife instruments

Owner’s manual v1.1

Documents available at:

http://extralifeinstruments.com/

PITCH Adjusts

pitch output for

selected step.

Range +/- 12

semitones

DATA this stepped

encoder adjusts the

selected sequence

parameter, like patch

number or tempo.

CLOCK input accepts

a 1-pulse-per-step clock

signal and advances the

sequencer in sync to

external gear.

RESET input

accepts a pulse to

restart the sequence

at the beginning, for

synchronized looping.

CV output sends

out an unquantized

control voltage

controlled by the CV

parameter for each

step (0-8v)

PITCH output sends

quantized control

voltage set by the

PITCH and OCTAVE

parameters for each

step (0-8v)

GATE output sends

5V gate signals for

each active step, the

duration of which is

set by each step’s

LENGTH parameter

STEP BUTTONS

select and toggle steps

on and o󰀨. Press once

to select and again to

toggle. Inactive steps are

activated automatically

when selected.

RECORD enables

motion recording. Press

and hold while adjusting

PITCH, OCTAVE,

LENGTH, or CV to

record changes to the

currently playing steps in

realtime.

MUTATE activates

the selected “mutation”

e󰀨ect. Adjust DATA while

holding MUTATE to

change the e󰀨ect depth.

OCTAVE Adjusts

pitch output for

selected step in

increments of 12

steps. Range +/- 4.

LENGTH Adjusts

the duration of the

selected step, as

a percentage of a

single step’s length.

Range 0-400%.

CV Adjusts the

value of the

secondary CV

output for the

selected step.

Range 0-100%

GLIDE Activates

portamento, or

a “slide” to the

selected note over

its duration.

SUPER SIXTEEN

SHIFT Press [SHIFT] plus another

button simultaneously to access its

secondary or “shift” function (these

are outlined in black labels on the

panel). Buttons that have shift

functions include Steps 9-16, Record,

Mutate, Glide, and Play. When

you are editing a parameter, press

[SHIFT] again to exit back to the

main note data display.

PLAY Start or stop the internal

sequencer playback. [SHIFT]+Play

resets to the start, the same as a

pulse to the RESET input. A pulse to

the CLOCK input will stop the internal

sequencer.

Note: Pressing play while the

CLOCK input is receiving a signal

generally has no e󰀨ect - if the internal

tempo is set much faster than the

external clock, however, pressing

play may cause the sequencer to

gain a step relative to the external

clock before it syncs again.

LOAD/SAVE enables you to save the active

sequence or load a new one. To save a

sequence to memory, press once, and SAVE

then use the knob to choose the PATCH DATA

NUMBER (1-99) [0-99] where this sequence

will be saved. To conrm it, press SAVE

again. Press [SHIFT] to cancel saving. Once

saved, the sequence can be recalled at any

time. It’s a good idea to save your sequences

frequently, since it’s easy to radically alter the

patch memory.

Note: While selecting a patch number, the

decimal point after the number indicates

that there is already a sequence saved at that

patch number.

Once you’ve chosen a PATCH NUMBER

to save your sequence, you can double-tap

SAVE to overwrite it with the active sequence.

Get in the habit of doing this whenever you

make a change you like! You can likewise

double-tap to reload the last-saved LOAD

sequence if you make a change you dislike.

To load a sequence, press once, and LOAD

then use the knob to choose a PATCH DATA

NUMBER to load. Press again to LOAD

conrm and load the sequence

Note:If there is no sequence in that patch

number, a blank sequence will be loaded.

When a new sequence is loaded, the

sequence will “pick up” playback in real-time at

the same place in the last bar of the sequence,

making synchronized songs and pickup

phrasing dead simple.

1. Sequence controls

2. Step editing

Step editing is accomplished by pressing the the 16 step

buttons in the center of the panel. The LEDs adjacent

to each button indicate whether that step is active or

inactive. This display indicates the 16-step rhythm of the

sequence.When selected for editing, its LED will on blink

and o󰀨. If the selective step is active, it will be mostly on

and blink o󰀨 briey. If it’s inactive, it will be mostly o󰀨 and

blink on briey.

To select a step, press the corresponding

button .once

If inactive, that step will be automatically

activated when selected. To deactivate a

step, press it again.

Once a step is selected, you can edit its

PITCH, OCTAVE, DURATION, CV, and

GLIDE values with the corresponding

knobs and button on the right side of the

panel. These values only change when the

knobs are moved and the display updates

to reect the new value. When a step is

selected, the display will update to show its

value for the last edited parameter.

Only active steps will trigger the gate

output and change the PITCH/CV outputs.

Inactive steps do not have any e󰀨ect on

the seqeuncer, but their values are saved

with the sequence.

While the sequencer is playing, the LEDS

will blink as each step is played to show a

“Running light” indicating the current step.

Tap once to select/activate a step

Tap again to deactivate

Press a button to select a

step then edit it by turning

the knobs.

PITCH & OCTAVE

together control the Pitch

output voltage.

CV controls the CV

output voltage.

DURATION controls the

length of the pulse sent

to the GATE output.

Produktspezifikationen

Marke:	Extralife Instruments
Kategorie:	Nicht kategorisiert
Modell:	Super Sixteen

Brauchst du Hilfe?

Wenn Sie Hilfe mit Extralife Instruments Super Sixteen benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Nicht kategorisiert Extralife Instruments

Extralife Instruments Super Sixteen Bedienungsanleitung

20 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024

AEG MECK52 Bedienungsanleitung

16 Oktober 2024

Makita UR012G Bedienungsanleitung

16 Oktober 2024

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024

IFM AC901S Bedienungsanleitung

16 Oktober 2024

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024

ART ProChannel II Bedienungsanleitung

16 Oktober 2024