Exakta Exa Bedienungsanleitung

Exakta Kamera Exa

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung fĂŒr Exakta Exa (42 Seiten) in der Kategorie Kamera. Dieser Bedienungsanleitung war fĂŒr 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF
Seite 1/42
1
[Translated from the German Ihagee manual with the aid of QuickDic 7.2
(www.quickdic.de
)
. Notes in square brackets are mine – Steve Sheppard.]
2
EXA, EXA I Repair Manual.
Basic Remarks:
The camera under repair is placed with the lens mount 350.09 to the front, i.e. in the photograph
taking direction.
EXA
Right: Side with wind knob 350.07-23.
Left: Side with time setting lever 350.04 U 3.
EXA I/63
Right: Side with wind knob 350.17-24.
Left: Side with time setting disc 350.21 U 3.
All screws and nuts have right-hand threads. Never use force!
Before every repair remove the viewnder (Do not touch the ground-glass screen).
A. Disassembly of EXA camera.
1. Remove the back 350.02
a) Withdraw the take-up spool 350.10.
2. Right side open.
a) Slacken the grub-screw in the wind knob 350.07-23, and withdraw the wind knob upwards.
b) Remove the two top-plate screws M1.2 DIN 91, take o the right top-plate 350.01-7, and
the rewind release button 350.01-6.
c) Ret the wind-knob. The grub-screw must be rmly tightened on the milled face of the
spindle. Take notice of the ratchet pawl 350.07-22 for the frame counter.
3. Left side open.
(This disassembly is not necessary to dismantle the inner parts.)
a) Remove the two top-plate screws M1.2 DIN 91.
b) Slacken the grub-screw in the wind knob 350.07-23, and withdraw the wind knob upwards.
Withdraw the rewind spindle 350.12-6 from below.
c) Take o the left top-plate 350.03-7.
d) Ret the rewind knob. Tighten the grub-screw rmly on to the milled face of the rewind
spindle.
4. Mechanism removal.
a) Cock the shutter.
b) Place the camera front upwards.
c) Remove the four xing screws M1.7 x 6.5 DIN 91 from the lens ange 350.09, and remove
the ange (noting any shims 300.21-52/1).
d) Remove the shutter inhibit lever 300.21-46, the screws M1.2 for the front-plate, and the
front-plate 350.11 U1 (or 350.11 U3).
3
e) Remove the xing screw M1.7 x 4 DIN 63 for the inner mechanism (in the milled area for
the lens ange).
f) Place the camera back side uppermost.
g) Remove the inner-mechanism xing screws M1.7 x 4 DIN 85 in both cassette chambers.
h) Place the camera upright.
i) Remove drive-pinion 350.01-9 from sprocket spindle 350.01-4.
j) Set shutter speed lever 350.04 U 3 to B, and extract the inner mechanism from the outer
housing. Do not touch the mirror.
AA. Disassembly of EXA 1/63 camera.
1. Remove the back 370.20.
a) Withdraw the take-up spool 370.09.
2. Removal of top-plate 350.21 U1.
a) Remove screw 350.21-24, bush 350.17-25 for frame-counter disc, frame-counter disc
350.17 U5, and spring-washer 350.17-27. Withdraw wind knob 350.17-24, pushing against
the end of the wind bush 350.17 U4 with two ats [Zweikant].
b) Withdraw the spool-retaining spring 300.15 U 12 from the rewind bush. Unscrew the
rewind bush [remove the screw] (pay attention to compression-spring 350.21-29, shim
beneath 300.15-34, and distance piece 370.21-21), and pull out the rewind spindle 350.21-
20 with rewind-knob 350.21-19.
c) Release circlip 6 DIN 6799, remove spring-washer 370.04-45, and take o time-setting disc
350.21 U 3.
d) Remove the four top-plate xing screws M1.4 x 3 DIN 91, and take o the top-plate.
e) Ret the time-setting disc with spring-washer and circlip (pay attention to the contact disc
350.22-13 and setting slide on time plate 350.22-U1)[i.e. make sure the pin on time setting
disc engages with the paxolin disc and the sliding plate for speed setting below].
f) Ret the wind-knob, spring-washer and frame-counter disc with sleeve and screw (pay
attention to rewind latch 350.17-19).
3. Mechanism removal.
a) Cock the shutter.
b) Place the camera front side upwards.
c) Remove the four xing screws M1.7 x 6 DIN 63 for the lens-ange 350.09, and take o the
lens-ange (noting any shims 300.21-52/1).
d) Remove the mechanism xing screw M1.7 x 4 DIN 63 (in the milled area for the lens
ange).
e) Place the camera with the back side upwards.
f) Remove the inner mechanism xing screws M1.7 x 4 DIN 84 in both cassette chambers.
g) Extract the inner mechanism from the outer housing. Do not touch the mirror.
B. EXA assembly.
1. Mechanism insertion.
As under disassembly of camera A.4, but in reverse order. Check for correct functioning.
2. Close left side.
As under disassembly of camera A.3, but in reverse order. Check for correct functioning.

Produktspezifikationen

Marke: Exakta
Kategorie: Kamera
Modell: Exa

Brauchst du Hilfe?

Wenn Sie Hilfe mit Exakta Exa benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten


Bedienungsanleitung Kamera Exakta

Exakta

Exakta A Bedienungsanleitung

30 August 2024
Exakta

Exakta Exa Bedienungsanleitung

31 Mai 2024

Bedienungsanleitung Kamera

Neueste Bedienungsanleitung fĂŒr -Kategorien-

Trust

Trust Powerc@m 820 Bedienungsanleitung

15 Oktober 2024
Bushnell

Bushnell Trophy Cam 119456 Bedienungsanleitung

13 Oktober 2024
Polaroid

Polaroid 600 Series Bedienungsanleitung

9 Oktober 2024
Fujifilm

Fujifilm FinePix F500EXR Bedienungsanleitung

7 Oktober 2024
Rollei

Rollei Giro 105 Bedienungsanleitung

6 Oktober 2024
Leica

Leica R3 Bedienungsanleitung

5 Oktober 2024
Rollei

Rollei Compactline 52 Bedienungsanleitung

5 Oktober 2024
Kodak

Kodak EasyShare C1530 Bedienungsanleitung

4 Oktober 2024
Easypix

Easypix V515 Duo Bedienungsanleitung

3 Oktober 2024
Canon

Canon EOS R10 Bedienungsanleitung

3 Oktober 2024