Erica Synths Black HADSR EG Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Erica Synths Black HADSR EG (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 10 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
THANK YOU FOR PURCHASING THIS
ERICA SYNTHS BLACK SERIES
MODULE! These are high-end modules
with unique functionality. Only the
highest quality components are used
and all inputs and outputs are
protected against undesired
overvoltage. When designing the Black
Series, we did not economise on the
module width, we put design and
usability first. Big knobs are assigned to
functions that make dierence in sound.
The Erica Black series are a range of
modules that together make an entire
synthesizer. Enjoy!
The Erica Black HADSR Envelope
generator is feature-rich yet easily
operated five stage envelope
generator. Use it with Black CV
Expander to add more versatility.
SPECS:
Output signal amplitude…..........0 – +10V
Hold time………………......................… 0 – 2’’
Attack time………….....................……..0 – 2’’
Decay time……....................……………0 – 2’’
Sustain level……….................………0 - +10V
Release time……...................………….0 – 5’’
Power consumption…...... +25mA, -15mA
Module width………………...............……10HP
Module depth……………………............25mm
BLACK HADSR EG
LED indicates
envelope status
Get your 0 - +10V
envelope here!
Inverted output
follows direct output
and provides inverted,
0 - -10V envelope. Use
it to duck audio signals
or control VCFs
Knobs set ATTACK,
DECAY, SUSTAIN and
RELEASE levels. For
more versatility use the
Erica Black CV
Expander to aect
each stage level by
control voltage. Before
connecting CV
expander, remove 4
jumpers from CV
Expander connector on
Black Envelope
generator module and
make sure the red
stripe on ribbon cable
matches black dots
next to the connectors
both on CV Expander
and Envelope
generator
Select EG operation mode.
OFF is for normal, gated
envelopes, AD loop is
industry standard, but Erica
Synths Black EG has unique
full ADSR envelope loop,
where SUSATAIN time
(«gate on» time) is set by
HOLD knob
Use this knob to set the HOLD
time. Note that HOLD can
be before ATTACK (similar to
Gate delay) or after ATTACK
to musically highlight
attack stage
Select between HADSR and
AHDSR envelope modes
Select linear or logarithmic
envelope shape
Patch GATE signal here
If you wish to retrigger the
envelope at any stage, patch
TRIGGER signal here. If no
cable is patched in TRIGGER
jack, envelope is shaped by
GATE signal only
Please follow the instructions for use of this Erica
Synths module below,cause only this will guarantee
proper operation of the module and ensure
warranty from Erica Synths.
Water is lethal for most of the electric devices, unless
they are made waterproof. Erica Synths module is
NOT intended for use in a humid or wet
environment. No liquids or other conducting
substances must get into the module. Should this
happen, the module should be disconnected from
mains power immediately, dried, examined and
cleaned by a qualified technician.
Do not expose the module to temperatures above
+50° C or below -20° C.
Transport the instrument with modules installed
carefully, never let it drop or fall over. Warranty does
not apply to modules with visual damages.
The module has to be shipped in the original
packaging only. Any module shipped to us for
return, exchange and/or warranty repair has to be
in its original packaging. All other deliveries will be
rejected and returned to you. Make sure you keep
the original packaging and technical
documentation.
You will find Erica Synths terms of warranty at
www.ericasynths.lv.
Items for return, exchange and/or warranty repair have
to be sent to: Erica Synths Andrejostas Str. 4a, room T8-C,
Riga, Latvia, LV-1045
This device complies to the EU guidelines and is
manufactured RoHS conforming without use of led,
mercury, cadmium and chrome. Nevertheless, this device is
special waste and disposal in household waste is not
recommended.
Designed and made in Latvia.
User manual by Girts Ozolins@Erica Synths.
Design by Ieva Andrupe.
Copying, distribution or any commercial use in any way is
prohibited and needs the written permission by Erica Synths.
Specifications are subject to change without notice.
In case of any questions, feel free to contact us through
www.ericasynths.lv or via e-mail info@ericasynths.lv.
CHECK THE DEMOS OF OTHER ERICA SYNTHS
MODULES ON WWW.ERICASYNTHS.LV
SAFETY INSTRUCTIONS
DISPOSAL
BLACK HADSR EG


Produktspezifikationen

Marke: Erica Synths
Kategorie: Nicht kategorisiert
Modell: Black HADSR EG

Brauchst du Hilfe?

Wenn Sie Hilfe mit Erica Synths Black HADSR EG benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Erica Synths

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-