Erica Synths Black Double Bass Bedienungsanleitung

Erica Synths Nicht kategorisiert Black Double Bass

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Erica Synths Black Double Bass (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 4 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
THANK YOU FOR PURCHASING ERICA SYNTHS
BLACK SERIES MODULE!
Erica Black Series include high-end, unique functionality and
superior quality modules. Only the best, highest quality compo-
nents are used, all inputs and outputs are protected against
undesired overvoltage. When designing Black Series, we put
design and usability superior. Big knobs are assigned to key
functions of the module, which makes Black Series ideal for live
performances. Enjoy!
Erica Synths Black Double Bass is unique module that combines
two transistor suboscillators (-1 and -2 octaves) and lowpass
filter. It will turn any VCO or beeper into massive bass sound with
CV control over octave mix and cuto frequency. Sync input that
resets suboscillators on incoming pulse, provides even more
versatility in sound design. The module can be also provide
aggressive distortion, when used with percussive sounds like
bassdrums.
FEATURES:
Two transistor based -1 and -2 octaves suboscillators
Manually and CV controlled fade between suboscillators
Manually and CV controlled lowpass VCF
Suboscillator synchronisation input
Individual outputs of suboscillators
Limiter on the output to avoid clipping
Signal Thru output
CV level attenuators
SPECS:
Audio input level …………..………-5V - +5V
CV level (full sweep)…….……....-5V - +5V
Power consumption…..............+50mA, -39mA
Module width……………….....……10HP
Module depth………………..……..35mm
CLR CVSBMIX CVSYNC IN OUT
-1 OUTTHRUIN -2 OUT
BLACK DOUBLE BASS
SUBMIX CV LVL
SUBMIX
COLO UR CV LVL
DRY/WET
COLO UR
-1 OCT-2 OCT
Use this knob to control the mix
between the suboscillators.
CCW setting is -2 octaves
suboscillator, CW setting is -1
octave suboscillator. SUBMIX
CV is added to the SUBMIX
knob setting
This is lowpass VCF cuto
manual control knob. Non
resonant lowpass VCF is
in series with
suboscillators, so you can
control the harmonic
content of the output
signal. Full CW setting
leaves the VCF fully open.
CLR CV is added to the
COLOUR knob setting
This is Colour CV
(VCF cuto frequency)
attenuator
These are dedicated -1
and -2 octave
suboscillator outputs. Try
to run those through two
VCAs controlled by EGs
that receive gates from
two sequencers or two
channels of the same
sequencer. This way
you’ll get two basslines
that are perfectly in tune,
but have dierent
rhythmic patterns
This is the main output of
the module – the sum of
suboscillators and the
VCF
This is the VCF cutoCV
input
This is Submix CV attenuator
This is manual Dry/Wet
control, where Dry is the
original audio signal, Wet is
the sum of suboscillators
and lowpass VCF.
This is audio thru output.
Basically, it copies the input
signal and buers it.
This is audio input of the
module. Experiment with
dierent waveforms and
percussive sounds and see,
how the module reacts!
This is suboscillator
synchronisation input. The rising
edge of the incoming signal will
reset the suboscillator cycle.
Experiment with the frequency
of a sync oscillator and find the
sweet spots!
This is suboscillator mix CV
input
DOUBLE BASS
DOUBLE BASS
SAFETY INSTRUCTIONS
DISPOSAL
Please follow the instructions for use of this
Erica Synths module below, ‘cause only this
will guarantee proper operation of the module
and ensure warranty from Erica Synths.
Water is lethal for most of the electric devices,
unless they are made waterproof. Erica
Synths module is NOT intended for use in
a humid o wet environment. No liquids or r
other conducting substances must get into
the module. Should this happen, the module
should be disconnected from mains p er ow
immediately, dried, examined and cleaned by
a qualified technician.
Do not expose the module to temperatures
Transport the instrument with modules
installed carefully, never let it drop or fall over.
Warranty does not apply to modules with
visual damages.
The module has to be shipped in the original
packaging only. Any module shipped to us
for return, exchange and/or warranty repair
has to be in its original packaging. All other
deliveries will be rejected and returned to you.
Make sure you keep the original packaging
and technical documentation.
You will find Erica Synths terms of warranty at
http://ericasynths.lv/en/terms/
Items for return, exchange and/or warranty
repair have to be sent to: Erica Synths,
Andrejostas Str.12, Riga, Latvia, LV-1045
This device complies to the EU guidelines and is
manufactured RoHS conforming without use of
led, mercury, cadmium and chrome.
Nevertheless, this device is special waste and
disposal in household waste is not
recommended.
Designed and made in Latvia.
User manual by Girts Ozolins@Erica Synths.
Design by Ineta Briede@Black8.
Copying, distribution or any commercial use in
any way is prohibited and needs the written
permission by Erica Synths.
Specifications are subject to change without
notice.
In case of any questions feel free to contact us
via e-mail info@ericasynths.lv
Check out other Erica Synths modules & devices
at www.ericasynths.lv


Produktspezifikationen

Marke: Erica Synths
Kategorie: Nicht kategorisiert
Modell: Black Double Bass

Brauchst du Hilfe?

Wenn Sie Hilfe mit Erica Synths Black Double Bass benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Erica Synths

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-