Epson WorkForce Pro WP-4090 Bedienungsanleitung

Epson Drucker WorkForce Pro WP-4090

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Epson WorkForce Pro WP-4090 (4 Seiten) in der Kategorie Drucker. Dieser Bedienungsanleitung war für 28 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Start Here

Read these instructions before using your printer.

1 Unpack

Caution: Do not open ink cartridge packages until you are ready to

install the ink. Cartridges are vacuum packed to maintain reliability.

Remove all tape and protective materials, including the foam and

plastic inside the printer.

2 Turn on

1 Connect the power cord to the back of the printer and to an

electrical outlet.

Do not connect to a computer yet.Caution:

2 Press the power button.

3 Install ink cartridges

1 Open the front cover.

2 Unpack the four ink cartridges.

3 Shake each cartridge as shown for about 5 seconds.

4 Install each cartridge in the correct slot for its color.

Push each cartridge in until it clicks.

5 Close the front cover.

The printer starts priming the ink. This takes about 12

minutes. When the green power light stops ﬂashing,

priming is complete.

Note: The included cartridges prime the printer and print about 1000

black pages/900 color pages. Actual page count may vary.

Caution: Don’t turn off the printer or open the cover while it is

priming or you’ll waste ink.

*412216300*

WorkForce® Pro WP-4090

4 Slide the edge guides against the paper, but not too

tight. Make sure the paper is under the tabs on the edge

guides.

5 Gently insert the paper cassette.

Note: The paper may slide forward slightly as you insert the

cassette. This is normal.

6 Extend the output tray and raise the paper stopper as

shown. (Do not raise the stopper for legal-size paper.)

5 Install software

If you’re using the product as a laser printer replacement,

you do not need to install any Epson drivers.

Note: To use the Fax Utility and Epson Status Monitor, install the

standard Epson driver. If you want to install multiple drivers, repeat

the software installation process as necessary. For more information,

see your online User’s Guide.

If you want to install Epson drivers, follow the steps below.

Note: If a computer does not have a CD/DVD drive, you can

download the software from the Epson website (see “Epson technical

support”).

Caution: Be sure to close any other programs, including any screen

savers and virus protection software, before beginning this software

installation.

1 Make sure the printer is to a NOT CONNECTED

computer.

Windows®: If you see a Found New Hardware screen, click

Cancel and disconnect the USB cable. You can’t install your

software that way.

4 Load paper in the cassette

You can load letter-, A4-, or legal-size plain paper in the

cassette. For instructions on loading envelopes and special

paper in the rear MP tray, see the online User’s Guide.

1 Pull out the paper cassette.

2 Slide the edge guides outward, and position them for the

size of paper you are using.

Note: If you are loading legal-size paper, extend the cassette as

shown.

3 Insert the paper with the glossy or printable side face

down.

Note: Make sure the paper is loaded against the front edge

guide and not sticking out from the end of the cassette.

Setup is unable to find my printer after connecting it

with a USB cable.

Make sure it is securely connected as shown:

Printing problems

Printing stops when an ink cartridge is expended. If a cartridge

is expended, you must replace it to continue printing.

Print quality problems

• Make sure your paper is loaded printable side down in the

cassette (usually the whiter, brighter, or glossy side).

• If you notice light or dark bands across your printouts or

they are too faint, run a nozzle check to see if the print

head needs cleaning. See the online User’s Guide for more

information.

• The ink cartridges may be low on ink. Check your cartridge

levels and replace cartridges, if necessary. See the online

User’s Guide for more information.

Error indicators

If you see one of the error indicators below, follow the steps

here to proceed:

On Flashing slowly Flashing fast

Paper is out, paper size doesn’t match, or multiple

sheets have fed at the same time. Load paper

correctly and press the paper feed button.

Paper is jammed in the cassette, the duplexer, or

inside the printer. Remove the jammed paper and

press the button. paper feed

The front cover is open. Close the cover.

The indicated ink cartridge is running low on ink.

Make sure you have a replacement cartridge.

The indicated ink cartridge is expended or not

installed correctly. Replace or reinstall the ink

cartridge.

The maintenance box is nearing the end of its

service life. Make sure you have a replacement

box.

The maintenance box is at the end of its service

life or not installed. Press the and buttons ink

at the same time to clear the error, then replace

the maintenance box.

Printer error. Turn the printer off and check

for jammed paper. Make sure you remove the

protective foam and plastic from inside the printer.

Then turn the printer back on. If the error does not

clear, contact Epson.

Ethernet connection error. Turn the printer off and

then on again. Check all network cables and router

connections.

2 Insert your product CD.

3 Windows: If you see the AutoPlay window, click

Run Setup.exe. If you see the User Account Control

screen, click Yes Continue or .

Mac OS® X: Epson Double-click the icon.

4 Click (Windows) or (Mac OS X) and follow Install Continue

the instructions on your computer screen.

5 Windows: When you see the Select Your Printer Driver

Type screen, select your desired driver. Then click Next

and follow the instructions on your computer screen.

Mac OS X: The standard Epson driver installs automatically.

If you want to install the PostScript driver, go to www.

epson.com/wp4090downloads. Then download and

install the ﬁle.

Any problems?

Network setup and printing problems

• Press the button to print a network status sheet.

• When using TCP/IP, make sure your network’s DHCP option is

enabled. If you have assigned a static IP address, make sure

it is not being used by another device.

• Try changing the network cable and/or the network port

connection to your router.

• Disable the ﬁrewall temporarily to see if that may be

causing the problem. Contact your ﬁrewall manufacturer for

assistance.

• If you have assigned a static IP address, make sure it is not

being used by another device.

Any questions?

Produktspezifikationen

Marke:	Epson
Kategorie:	Drucker
Modell:	WorkForce Pro WP-4090
WLAN:	Nein
Breite:	459.7 mm
Tiefe:	386 mm
Gewicht:	10900 g
Produktfarbe:	Weiß
Höhe:	642.6 mm
AC Eingangsspannung:	100 - 240 V
AC Eingangsfrequenz:	50 - 60 Hz
Betriebstemperatur:	10 - 35 °C
Relative Luftfeuchtigkeit in Betrieb:	20 - 80 %
Farbe:	Ja
Stromverbrauch (Standby):	0.6 W
Temperaturbereich bei Lagerung:	-20 - 40 °C
Luftfeuchtigkeit bei Lagerung:	5 - 85 %
Unterstützt Mac-Betriebssysteme:	Ja
Speicherkapazität:	- MB
RAM-Speicher maximal:	- MB
Maximale Auflösung:	4800 x 1200 DPI
Nachhaltigkeitszertifikate:	ENERGY STAR
Unterstützte Linux-Betriebssysteme:	Ja
Netzwerkfähig:	Ja
Standard-Schnittstellen:	USB 2.0
Druckgeschwindigkeit (Schwarz, normale Qualität, A4/US Letter):	16 Seiten pro Minute
Drucktechnologie:	Laser
Doppelseitiger Druck:	Ja
Gesamte Ausgabekapazität:	- Blätter
Gesamte Papierkapazität:	250 Blätter
Schalldruckpegel (Druck):	38 dB
Medientypen für das Papierfach:	Envelopes, Heavy paper, Plain paper, Recycled paper, Thin paper, Transparencies
ISO-A-Formate (A0...A9):	A4, A5, A6
Maximale Papiergröße der ISO A-Serie:	A4
Durchschnittlicher Stromverbrauch beim Drucken:	16 W
Maximale Druckgröße:	216 x 356 mm
Tinten- bzw. Tonersparmodus:	Ja
Druckgeschwindigkeit Duplex (Farbe, Standardmodus, A4/US Letter):	7.1 Seiten pro Minute
Maximale monatliche Auslastung:	25000 Seiten pro Monat
Zahl der Druckpatronen:	4
Seitenbeschreibungssprachen:	Epson ESC/P2, PCL 5e, PCL 6, PostScript 3
Maximale Papierkapazität:	580 Blätter
Unterstützte Server-Betriebssysteme:	Windows Server 2003, Windows Server 2003 x64, Windows Server 2008, Windows Server 2008 R2
ISO-B-Formate:	B5
Umschlaggrößen:	10, DL
Power-LED:	Ja
Optionale Konnektivität:	Ethernet
Druckgeschwindigkeit Duplex (Schwarz, Standardmodus, A4/US Letter):	9.2 Seiten pro Minute
Druckgeschw. (Schwarz, Entwurfsqualität, A4/US Letter):	11 Seiten pro Minute
Ethernet/LAN:	Ja