Epson WorkForce 60 Bedienungsanleitung

Epson Drucker WorkForce 60

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Epson WorkForce 60 (4 Seiten) in der Kategorie Drucker. Dieser Bedienungsanleitung war für 2 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
Start Here
Read these instructions before using your product.
1 Unpack
Power cordUSB cable
Caution: Do not open ink cartridge packages until you are ready to
install the ink. Cartridges are vacuum packed to maintain reliability.
Remove all protective materials.
2 Turn on
1 Connect the power cable.
Do not connect to your computer yet.Caution:
2 Press the button.Power
3 Install ink cartridges
1 Lift up the printer cover.
2 Open the cartridge cover.
3 Shake the ink cartridges gently 4 or 5 times, then unpack
them.
4 Remove only the yellow tape from each cartridge.
Caution: Don’t remove any other seals or the cartridges may
leak.
5 Insert the cartridges in the holder for each color. Press
each cartridge down until it clicks.
6 Close the cartridge cover. Press down until it clicks.
7 Lower the printer cover.
8 Press the button to prime the ink delivery system. Ink
This takes several minutes.
Note: Your printer ships with full cartridges and part of the ink
from the first cartridges is used for priming the printer.
Caution: Don’t turn off the printer while it is priming or you’ll
waste ink.
*411961800*
*411961800*
6 Replace the paper cassette cover, then gently insert the
paper cassette.
Note: The paper may slide forward slightly as you insert the
cassette. This is normal.
7 Extend the output tray as shown.
5 Choose your connection
You can connect your printer to your existing network
(wireless or wired) or directly to your computer using a USB
cable. See below for details on each connection method.
Wireless Connection
You must install the software on every computer from which
you want to print. For the rst installation, we recommend
using a USB cable to simplify wireless setup. After the printer
is connected to the network, you will be prompted to remove
the cable.
Make sure you know your network name (SSID) and network
password:
• Network name
• Network password
If you don’t have this information, contact the person who set
up your network.
Direct USB Connection
Make sure you have a USB cable. Do not connect the printer
to your computer until you’re instructed to do so.
Wired EthernetÂŽ Connection
Make sure you have an Ethernet network cable (not included).
You must install the software on every computer from which
you want to print.
4 Load paper
You can load letter-, A4-, or legal-size paper, as well as
4 6-, 5 7-, or 8 10-inch photo paper. For instructions on
loading legal-size paper, see the online User’s Guide.
1 Pull out the paper cassette and lift off the paper cassette
cover.
2 Slide the edge guides outward.
3 Position the guide shown below for the size of paper
you’re using.
4 6-inch
LTR
Letter-size
4 Insert the paper with the glossy or printable side face-
down.
4 6-inch Letter-size
Note: Make sure the paper is loaded against the edge guide
and not sticking out from the end of the cassette.
5 Slide the edge guides against the paper, but not too
tight. Make sure the paper is under the tabs on the edge
guides.
Letter-size4 6-inch
Any questions?
On-screen help with your software
Select or when you’re using your software.Help ?
User’s Guide
Click the desktop shortcut to access the online User’s Guide,
software downloads, Epson Supplies CentralSM, and more
(requires an Internet connection).
Epson Technical Support
Visit (U.S.) or epson.com/support epson.ca/support
(Canada) where you can download drivers, view manuals, get
FAQs, or e-mail Epson.
You may also speak with a support specialist by calling:
• U.S.: (562) 276-7202, 6 to 8 , Pacific Time, Monday AM PM
through Friday, and 7 to 4 SaturdayAM PM
• Canada: (905) 709-2567, 6 to 6 , Pacific Time, AM PM
Monday through Friday
Days and hours of support are subject to change without
notice. Toll or long distance charges may apply.
Any problems?
If you experience problems during setup, see below:
Network setup was unsuccessful.
• Make sure you select the right network name.
• If you see a firewall alert message, click or Unblock Allow
to let setup continue.
• If your network has security enabled, make sure you enter
your network password (WEP key or WPA passphrase)
correctly. If it has uppercase ( ) or lowercase ( ) ABC abc
letters, make sure you enter them correctly.
• Try moving the product to a different location. Avoid
placing it next to a microwave oven, 2.4 GHz cordless
phone, or large metal object such as a ling cabinet.
• If your wireless router doesn’t broadcast its network name
(SSID), manually enter your wireless network name. Make
sure there aren’t any access restrictions (such as MAC
address ltering) set on the wireless router. If access
restrictions are set, register the product’s MAC address
on the router. Print a Network Status Sheet (see below) to
obtain the MAC address. Then see your router’s manual for
instructions.
• Print a Network Status Sheet to see what network settings
are currently enabled in the printer. Press the Network
Information button to print a network status sheet.
• Remove and reinsert the CD to reinstall your product
software.
• If you’re using the WiFi button to connect to your
WPS-compatible wireless router, make sure you press the
WiFi button on your printer and the WPS button on
your router within 2 minutes of each other.
6 Install software
1 Make sure the printer is to your NOT CONNECTED
computer.
WindowsÂŽ: If you see a Found New Hardware screen, click
Cancel and disconnect the USB cable. You can’t install your
software that way.
2 Insert your product CD.
Windows: If you see the AutoPlay window, click
Run Setup.exe. If you see the User Account Control screen,
click Yes Continue or .
MacintoshÂŽ: Double-click the icon.Epson
3 Windows: Click and follow the on-screen Install
instructions.
Macintosh: Select the items you want to install. Then
click .Install
The product’s WiFi light is on but you cannot print.


Produktspezifikationen

Marke: Epson
Kategorie: Drucker
Modell: WorkForce 60

Brauchst du Hilfe?

Wenn Sie Hilfe mit Epson WorkForce 60 benĂśtigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Drucker Epson

Bedienungsanleitung Drucker

Neueste Bedienungsanleitung fĂźr -Kategorien-