Epson MP-60 Bedienungsanleitung

Epson Videostrahl MP-60

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Epson MP-60 (4 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 30 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Pendant Microphone

Attach the Neck Strap

1. Disconnect both ends of the pendant microphone’s neck

strap.

2. Attach the ends of the neck strap to the pendant

microphone.

3. Reconnect the ends of the neck strap.

Insert Batteries

1. Open the pendant microphone’s battery cover.

2. Insert the included AA batteries into the pendant

microphone.

3. Close the pendant microphone’s battery cover.

Using the Microphone

1. Wear the microphone around your neck with the black

emitter facing away from you.

2. Adjust the neck strap so that the top of the microphone is

just below your collarbone.

3. Press the power button on the pendant microphone until it

clicks into place. The power button turns green.

4. Verify that the Mic light on the AP-60 is lit. The light

should match the Channel selector on the pendant

microphone.

5. Adjust the microphone sensitivity by rotating the Gain

control wheel on the pendant microphone, if necessary.

Note:

If your system has more than one microphone, make sure that

each microphone is on a different channel.

For complete instructions on using or maintaining the pendant

microphone, see your AP-60 User’s Guide.

Specifications

Pickups: 2

Audio input: One 3.5 mm stereo-mini jack

Batteries: Two AA alkaline manganese

Power Consumption: DC 3.0 V 260 mA

Contacting Customer Support

Internet Support

Visit Epson’s support website at epson.com/support and select

your product for solutions to common problems. You can

download product documentation, view FAQs, or e-mail Epson

with your questions.

Speak to a Support Representative

Before you call Epson for support, please have the following

information ready:

■Product name (Epson ELPMC01)

■Product serial number

■Proof of purchase (such as a store receipt) and date of

purchase

Then call:

■U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday

through Friday.

■Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time,

Monday through Friday

Days and hours of support are subject to change without notice.

Toll or long distance charges may apply.

Important Safety Instructions

■Never pull the neck strap when it is hung around the neck.

It may result in injury or accident.

■Incorrect battery usage may cause leakage of battery fluid

and battery rupture, which could result in fire, injury or

corrosion of the system. When replacing batteries, take the

following precautions:

■Do not leave the microphone with batteries inside a

vehicle with the windows closed, in places where they

will be exposed to direct sunlight, or in other places that

may become extremely hot. Thermal deformation or

technical malfunction may occur, which could result in

fire.

■Insert batteries so that the polarities (+ and -) are correct.

■Do not use batteries of different types or mix old and

new batteries.

■Do not use any batteries other than those specified in

this guide.

■If the batteries leak, wipe away battery fluid with a soft

cloth. If fluid gets on your hands, wash them

immediately.

■Replace the batteries as soon as they run out.

■Remove the batteries if you will not be using the system

for a long period of time.

■Do not expose batteries to heat or flame and do not put

them in water.

Consult your state and local regulations regarding proper

disposal of batteries.

■Keep these batteries out of the reach of children. Batteries

are choking hazards and are very dangerous if swallowed.

■To reduce the risk of fire, do not expose this apparatus to

rain or moisture.

Warranty

1-Year Limited Warranty for Wireless Audio Accessory Product

What Is Covered: Epson America, Inc. (“Epson”) warrants to the first

retail purchaser that the product enclosed with this limited warranty

statement, if purchased new and operated in the United States or

Canada, will be free from defects in workmanship and materials for a

period of one (1) year from the date of original purchase. For warranty

service, you must provide proof of the date of original purchase.

What Epson Will Do To Correct Problems: Should this product

prove defective during the warranty period, please call the Epson

ConnectionSM at (562) 276-4394 in the U.S. and (905) 709-3839 in

Canada for warranty instructions and return authorization. An Epson

service technician will provide telephone diagnostic service to

determine whether the product requires service. If service is needed,

Epson will, at its option, exchange or repair the product without charge

for parts or labor. When Epson authorizes an exchange for the defective

unit, Epson will ship a replacement product to you, freight prepaid, so

long as you use an address in Canada or the U.S. (excluding Puerto

Rico and U.S. Possessions). You are responsible for securely packaging

the defective unit and returning it to Epson within five (5) working

days of receipt of the replacement. Epson requires a debit or a credit

card number to secure the cost of the replacement product in the event

that you fail to return the defective one. When warranty service

involves the exchange of the product or of a part, the item replaced

becomes Epson property. The replacement product or part may be new

or refurbished to the Epson standard of quality, and, at Epson's option,

may be another model of like kind and quality. Epson's liability for

replacement of the covered product will not exceed the original retail

selling price of the covered product. Exchange products and parts

assume the remaining warranty period of your original product covered

by this limited warranty.

What This Warranty Does Not Cover: This warranty does not apply

to refurbished or reconditioned products. This warranty covers only

normal use in the United States and Canada. This warranty is not

transferable and will not apply to products purchased from an end user.

This warranty does not cover damage to the Epson product caused by

parts or supplies not manufactured, distributed or certified by Epson.

This warranty does not cover third party parts, components or

peripheral devices added to the Epson product after its shipment from

Epson. Epson is not responsible for warranty service should any labels,

logos or serial numbers be removed or should the product fail to be

properly maintained or fail to function properly as a result of misuse,

abuse, improper installation, neglect, improper shipping, damage

caused by disasters such as fire, flood, and lightning, improper electrical

current, interaction with non-Epson products, or service other than by

an Epson Authorized Servicer. If a claimed defect cannot be identified

or reproduced, you will be held responsible for costs incurred.

THE WARRANTY AND REMEDY PROVIDED ABOVE ARE

EXCLUSIVE AND IN LIEU OF ALL OTHER EXPRESS OR

IMPLIED WARRANTIES INCLUDING, BUT NOT LIMITED

TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY,

NON-INFRINGEMENT OR FITNESS FOR A PARTICULAR

PURPOSE. SOME LAWS DO NOT ALLOW THE EXCLUSION

OF IMPLIED WARRANTIES. IF THESE LAWS APPLY, THEN

ALL EXPRESS AND IMPLIED WARRANTIES ARE LIMITED TO

THE WARRANTY PERIOD IDENTIFIED ABOVE. UNLESS

STATED HEREIN, ANY STATEMENT OR REPRESENTATIONS

MADE BY ANY OTHER PERSON OR FIRM ARE VOID.

EXCEPT AS PROVIDED IN THIS WRITTEN WARRANTY,

NEITHER EPSON AMERICA, INC., NOR ITS AFFILIATES

SHALL BE LIABLE FOR ANY LOSS, INCONVENIENCE, OR

DAMAGE, INCLUDING DIRECT, SPECIAL, INCIDENTAL OR

CONSEQUENTIAL DAMAGES, RESULTING FROM THE USE

OR INABILITY TO USE THE EPSON PRODUCT, OR FOR

LOST DATA OR LOST SOFTWARE WHETHER RESULTING

FROM BREACH OF WARRANTY OR ANY OTHER LEGAL

THEORY.

In Canada, warranties include both warranties and conditions. Some

jurisdictions do not allow limitations on how long an implied warranty

lasts and some jurisdictions do not allow the exclusion or limitation of

incidental or consequential damages, so the above limitations and

exclusions may not apply to you. This warranty gives you specific legal

rights, and you may also have other rights which vary from jurisdiction

to jurisdiction.

To find the Epson Authorized Reseller nearest you, visit our website at

www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

To find the Epson Customer Care Center nearest you, visit

epson.com/support or write to:

Epson America, Inc., P. O. Box 93012, Long Beach, CA 90809-3012

FCC Compliance Statement

For United States Users

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio or television reception. However, there is

no guarantee that interference will not occur in a particular installation.

If this equipment does cause interference to radio and television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

■Consult the dealer or an experienced radio/TV technician for help.

WARNING

The connection of a non-shielded equipment interface cable to this

equipment will invalidate the FCC Certification or Declaration of this

device and may cause interference levels which exceed the limits

established by the FCC for this equipment. It is the responsibility of the

user to obtain and use a shielded equipment interface cable with this

device. If this equipment has more than one interface connector, do not

leave cables connected to unused interfaces. Changes or modifications

not expressly approved by the manufacturer could void the user’s

authority to operate the equipment.

Infrared wireless transmitter: 2127981

For Canadian Users

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appareil numérique de la classe Class B respecte toutes les exigences du

Règlement sur le materiel brouilleur du Canada.

Epson is a registered trademark and Epson Exceed Your Vision is a registered

logomark of Seiko Epson Corporation. Epson Connection is a service mark of

Epson America, Inc.

General Notice: Other product names used herein are for identification

purposes only and may be trademarks of their respective owners. Epson

disclaims any and all rights in those marks.

This information is subject to change without notice.

Microphone à bretelle

Attachez la bretelle

1. Déconnectez les deux extrémités de la bretelle du

microphone.

2. Fixez les extrémités de la bretelle sur le microphone.

3. Reconnectez les extrémités de la bretelle.

Insérez les piles

1. Ouvrez le couvercle du compartiment à piles du

microphone.

2. Insérez les piles AA fournies dans le microphone.

3. Ouvrez le couvercle du compartiment à piles du

microphone.

Utilisation du microphone

1. Portez le microphone autour du cou avec l’émetteur orienté

vers l’extérieur.

2. Ajustez la bretelle de sorte que le haut du microphone se

trouve juste sous votre clavicule.

3. Appuyez sur le bouton d’alimentation du microphone

jusqu’à ce qu’il s’enclenche. Le bouton d’alimentation passe

au vert.

4. Vérifiez que le témoin Mic du AP-60 est allumé. Le témoin

devrait correspondre au sélecteur Channel du microphone.

5. Au besoin, réglez la sensibilité du microphone en tournant la

molette Gain du microphone.

Remarque :

Si votre système est équipé de plusieurs microphones, assurez-

vous que chaque microphone est réglé sur un canal distinct.

Pour des instructions détaillées sur l’entretien ou l’utilisation du

microphone, voyez le Guide de l’utilisateur du AP-60.

Spécifications

Capteurs : 2

Entrée audio : une mini-prise stéréo de 3,5 mm

Piles : deux piles AA alcalines au

manganèse

Consommation : 3,0 V CC 260 mA

Assistance technique

Assistance Internet

Visitez notre site Web de soutien à epson.ca/support et

sélectionnez votre produit pour des solutions à des problèmes

courants. Vous pouvez télécharger de la documentation sur les

produits, consulter la foire aux questions ou envoyer un courrier

électronique à un représentant du soutien qui répondra à vos

questions. (Site Web présenté uniquement en anglais.)

Parler à un représentant du soutien technique

Avant de téléphoner à Epson pour obtenir de l’aide, veuillez

avoir à portée de la main les renseignements suivants :

■Nom du produit (Epson ELPMC01)

■Numéro de série du produit

■Preuve d’achat (telle qu’un reçu de magasin) et date d’achat

Composez ensuite :

■États-Unis : (562) 276-4394, de 6 h à 18 h, heure du

Pacifique, du lundi au vendredi.

■Canada : (905) 709-3839, de 6 h à 18 h, heure du Pacifique,

du lundi au vendredi

Les jours et les heures de soutien peuvent être modifiés sans

préavis. Des frais d’interurbain peuvent s’appliquer.

Consignes de sécurité importantes

■Ne tirez jamais sur la bretelle quand elle est suspendue à

votre cou. Cela pourrait entraîner des blessures ou un

accident.

■L’utilisation non indiquée d’une pile peut causer la fuite de

liquide de pile et sa rupture, ce qui pourrait entraîner un feu,

des blessures ou la corrosion du système. Lorsque vous

remplacez les piles, observez les consignes suivantes :

■Ne laissez pas un microphone avec les piles dans un

véhicule dont les vitres de portières sont fermées, dans

des endroits où il sera exposé à la lumière directe du

soleil ou dans d’autres endroits susceptibles de devenir

extrêmement chauds. Il pourrait s’ensuivre une

déformation thermique ou une défaillance technique

pouvant entraîner un feu.

■Insérez les piles en respectant la polarité (+ et -).

■N’utilisez pas des piles de types différents et ou des piles

vieilles et neuves ensemble.

■N’utilisez pas des piles autres que celles spécifiées dans ce

guide.

■En cas de fuite d’une pile, essuyez le liquide avec un

chiffon doux. Si vos mains viennent en contact avec le

liquide, lavez-les immédiatement.

■Remplacez les piles dès qu’elles sont épuisées.

■Retirez les piles si vous ne prévoyez pas utiliser le système

pendant une période prolongée.

■N’exposez pas les piles à la chaleur ou aux flammes et ne

les mettez pas dans l’eau.

Consultez votre réglementation provinciale et locale

concernant l’élimination appropriée des piles.

■Conservez les piles hors de la portée des enfants. Les piles

représentent un risque d’étouffement et leur ingestion est

très dangereuse.

■Pour réduire le risque d’incendie, n’exposez pas cet

accessoire a la pluie ou à l’humidité.

Produktspezifikationen

Marke:	Epson
Kategorie:	Videostrahl
Modell:	MP-60
Produktfarbe:	Black, White
Übertragungstechnik:	Kabellos
Akku-/Batterietyp:	AA
Typ:	Bühnen-/Auftrittsmikrofon
Energieverbrauch:	0.260 mA
Anzahl unterstützter Akkus/Batterien:	2
Mikrofon-Eingang:	Ja
Arbeitsspannung:	3 V