Epson ELPMBC04 Bedienungsanleitung

Epson Videostrahl ELPMBC04

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Epson ELPMBC04 (16 Seiten) in der Kategorie Videostrahl. Dieser Bedienungsanleitung war für 34 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/16

ELPMBC02 / ELPMBC03 / ELPMBC04

9-12" (229-305mm) Adjustable Length Column

6" (152mm) Fixed Extension Column

3" (76mm) Fixed Extension Column

DISCLAIMER

Milestone AV Technologies and its affiliated corporations and

subsidiaries (collectively “Milestone”), intend to make this

manual accurate and complete. However, Milestone makes no

claim that the information contained herein covers all details,

conditions or variations, nor does it provide for every possible

contingency in connection with the installation or use of this

product. The information contained in this document is subject

to change without notice or obligation of any kind. Milestone

makes no representation of warranty, expressed or implied,

regarding the information contained herein. Milestone assumes

no responsibility for accuracy, completeness, or sufficiency of

the information contained in this document.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: A WARNING alerts you to the possibility of

serious injury or death if you do not follow the instructions.

CAUTION: A CAUTION alerts you to the possibility of

damage or destruction of equipment if you do not follow the

corresponding instructions.

WARNING: Failure to read, thoroughly understand, and

follow all instructions can result in serious personal injury,

damage to equipment, or voiding of factory warranty! It is the

installer’s responsibility to make sure all components are

properly assembled and installed using the instructions

provided

WARNING: Failure to provide adequate structural strength

for this component can result in serious personal injury or

damage to equipment! It is the installer’s responsibility to

make sure the structure to which this component is attached

can support five times the combined weight of all equipment.

Reinforce the structure as required before installing the

component.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the ELPMBC02/ELPMBC03/

ELPMBC04 does not exceed 500 lbs (226 kg).

• The weight capacity of the ELPMBC02/ELPMBC03/

ELPMBC04 may be LIMITED to the lowest weight

capacity of any other component or accessory used

within the mounting system.

WARNING: Do not use this product outdoors.

WARNING: Use this mounting system only for its intended

use as described in these instructions. Do not use

attachments not recommended by the manufacturer.

WARNING: Never operate this mounting system if it is

damaged. Return the mounting system to a service center for

examination and repair.

NOTE: ELPMBC02/ELPMBC03/ELPMBC04 are Listed for use

with ELPMBP04, ELPMBP05, ELPMBP06,

ELPMBP07 AND ELPMBPRH ceiling plates and

mounts specified for use with 1-1/2" NPT following

ANSI/ASME B1.20.1 (Schedule 40, 0.154" minimum

thickness, steel or aluminum - ASTM B221) extension

columns. ELPMBC02 / ELPMBC03 / ELPMBC04

extension columns are suitable for a maximum 500 lbs

(226 kg).

--SAVE THESE INSTRUCTIONS--

TOOLS REQUIRED

5/32" - security

3/16"

PARTS

[Adjustable length]

A (1)

[Fixed length]

B (1)

C (1)

5/16" x 5/8" D (1)

5/16"

E (1)

5/16"

F (2)

5/16" x 1/4" H (2)

5/16" x 1/4"

(security)

G (1)

5/32"

A (1)

(security)

J (1)

3/16"

NOTE: Parts B-J are only included with adjustable length

columns.

Installation Instructions

FIXED LENGTH EXTENSION COLUMN

IMPORTANT ! : The following procedure assumes that

the ceiling plate/adapter (not included) has been properly

installed following instructions provided with ceiling plate/

adapter.

NOTE: Intended for use with Chief accessories and mounts.

1. Install 1-1/2" NPT threaded column (A) into plate/adapter

(See Figure 1). Securely tighten column.

• Ensure column (A) engages four full threads into

plate/adapter.

Figure 1

2. Secure column (A) by tightening set screw in plate/adapter

(See Figure 1).

NOTE: Hex key and set screw provided with plate/adapter.

WARNING: Exceeding the weight capacity can result in

serious personal injury or damage to equipment! It is the

installer’s responsibility to make sure the combined weight of

all components attached to the ELPMBC02/ELPMBC03/

ELPMBC04 columns do not exceed 500 lbs (226 kg).

• The weight capacity of the ELPMBC02/ELPMBC03/

ELPMBC04 columns may be LIMITED to the lowest

weight capacity of any other component or accessory

used within the mounting system.

3. Install and secure projector/display mount (not included) to

lower end of column (A) following instructions included with

mount.

ADJUSTABLE LENGTH EXTENSION

COLUMN

IMPORTANT ! : The following procedure assumes that

the ceiling plate/adapter (not included) has been properly

installed following instructions provided with ceiling plate/

adapter.

NOTE: Intended for use with Chief accessories and mounts.

1. Install 1-1/2" NPT threaded column (A or B, as applicable)

into plate/adapter (See Figure 2). Securely tighten column.

• Ensure column (A or B, as applicable) engages four full

threads into plate/adapter.

Figure 2

2. Secure column (A or B, as applicable) by tightening set

screw in plate/adapter (See Figure 2).

NOTE: Hex key and set screw provided with plate/adapter.

3. Install mating column (A or B, as applicable) (See Figure 2).

Installation Instructions

4. Using key (J), loosely install screw (C) through lock washer

(D), flat washer (E), and outer column (B) into adjustment

hole in inner column (A) (See Figure 3).

NOTE: Two adjustment holes provided in columns 6" or longer

(152mm) in length. Either adjustment hole can be used

to provide 1" (25mm) adjustment increments.

Figure 3

5. Adjust column (A or B, as applicable) to desired length, then

rotate and lock into position (See Figure 3).

NOTE: Any locking slot can be used to provide 2" (51mm)

adjustment increments.

6. Tighten screw (C) using key (J) (See Figure 3).

7. Install and tighten set screws (standard (F) or security (G),

as desired) using key (J) (See Figure 4).

Figure 4

8. Install and secure projector/display mount (not included) to

lower end of column (A or B, as applicable) following

instructions included with mount.

CDE

F x 2

G x 2

1.90 OD

2.31 OD

1.0

FULLY EXTENDED

ALL THREADS

1-1/2" NPT

MIN LENGTH

OUTER TUBE

LENGTH

1.00

FULLY RETRACTED

1.50 ID

LENGTH

DIMENSIONS

Fixed Length Column

Adjustable Length Column

DIMENSIONS: INCH

Produktspezifikationen

Marke:	Epson
Kategorie:	Videostrahl
Modell:	ELPMBC04
Breite:	48 mm
Tiefe:	48 mm
Produktfarbe:	Weiß
Höhe:	76 mm
Höchstgewichtskapazität:	226.8 kg
Markenkompatibilität:	Epson