Epcom TT744 Bedienungsanleitung

Epcom Audio-/Video-Extender TT744

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Epcom TT744 (3 Seiten) in der Kategorie Audio-/Video-Extender. Dieser Bedienungsanleitung war für 19 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

① DC12V Power Input

② Ethernet Control

③ RS232 Serial Port

④ LOCAL CONTROL PORT: Connect

with receiver extension cable,

receive s ignal from controller

2. Receiver unit (RX)

1. Plug and play

2. Support 20~60 Hz IR pass backK

3 Support intelligent EDID management.

4 Support resolution up to 1080p 60Hz. @

5 s four. Transmitter support HDMI loop-out

6 Transmission distance is up to 40 meters by CAT6/6A/7.

7. Support to switch and select input source device and output

display by both remote control and button on unit device

8 Support IR remote control, Ethernet control and RS232 control.

9. Can be powered by network cable. It only needs to connect the 12V

power supply on the transmitter unit, both transmitter and receivers

start work.

1. HDMI source device (DVD, PS3, Set top box, PC etc)

2. HDMI display device like SDTV, HDTV, and projector with

HDMI port.

3. UTP/STP CAT6/6A/7 cable, follow standard IEEE-568B.

Back Panel

① HDMI input indicator

② Switch: To select HDMI input

③ Power indicator

④ IR Receiving window

1 2 3

× Remote controller 1

IR receiver extension

4 cable ×

· IMPORTANT SAFETY NOTICE

Please read below safety instructions carefully before installation and

operation:

1. Please pay attention to all the warnings and hints on this device.

2. Do not expose this unit to rain, moisture and liquid.

3. Do not put any stuff into the device.

4. Do not repaire the device or open the enclosure without professional

person guidence to avoid electronic shock.

5. Make sure good ventilation openings to avoid product overheating

damage.

6. Shut off power and make sure environment is safe before installation.

7. Do not plug-in/out the network cables and IR cables when it is in using

to avoid cables damage.

8. Use DC12V 3A only Make sure the specification matched if using 3 / .

party DC adapters .

Receiver

RJ45 output

HDMI input

HDMI sourc e

HDMI output

HDMI loc al

output

HDMI displ ay

HDMI Matrix Switch

Power

⑤ EDID

⑥ IR outputs for IR Blasters

⑦ HDMI Inputs

⑧ HDMI local outputs

⑨ RJ45 signal output

· FEATURES

· INSTALLATION REQUIREMENT

This product is a 4×4 HDMI Matrix Switch over network cable, with

4 HDMI inputs, 4 RJ45 output and 4 HDMI loop-out. 4 HDMI outputs

send the high definition audio/video signals to 4 HDTV d isplays at

local site, and at the same time, 4 RJ45 outputs transmit and extend

the audio/video signals to 4 HDTV displays in 40 meters far away via

4 receive rs. RS232 control Ethernet control, button control and remote ,

control make switching/ setting the input and output easily. This

product is perfect for security system, digital monitoring system,

school education system, exhibition center, multimedia conference,

command system etc.

• PRODUCT INTRODUCTION

· PACKAGE ONTENTSC

7 8

5 6 9

DC 12V 3 A Power x 1/

IR blaster extension

cable x4

IR receiver extension cable

(LOCAL CONTROL port)×1

5- White/Blue 6- Green

7- White/Brown 8- Brown

2. Connection

• INSTALLATION PROCEDURES

1. How to make a CAT / / network ca6 6A 7 ble

Follow the stanard of IEEE-568B:

1- White/Orange 2- Orange

3- White/Green 4- Blue

1 T unit ( X). TransmitterMatrix

· PANEL DESCRIPTION

③

Front Panel

1) Connect HDMI source devices to the transmitter(matrix) inputs via

HDMI cables.

2) If using the HDMI loop-output, connect the HD display devices to

the outputs on the transmitter(matrix) via HDMI cables.

3) Connect the receiver units to the tran smitter(matrix) via network

cable, and connect the HD display devices to the HDMI outputs

of the receiver units

4) If using the IR function, connect the IR blaster to the IR OUT on the

transmitter(matrix), and the IR receiver cable to IR IN on the receiver.

5 )Plug the power supply into the Matrix power socket and plug the

power adaptor into a mains socket.

Connection instruction

3. PC Control

The Ehternet RJ45 port is the link for TCP/IP controls, connect to an active

ethernet link with an RJ45 terninater cable.

① The Outputs (TV side) are fixed and cannot be changed.

② Change the Input to display that onto the specified Output TV.

③ These buttons will force the chosen HDMI Input onto all Output TVs.

④ Press OK to confirm.

①

②

HD MI M at rix x 1 HD MI Receivers x 4 Us er Man ual x 1 HDMI sourc e

a browser, please keep try in other browser), then will enter above

interface.

- × Wall mount kit 2pcs

× Screws 6pcs

HDMI sourc e

RJ45 indicator led keeps on with

HDMI signal transmission flashes

with no signal transmission

· SPECIFICATIONS

4 Matrix Switch X4 HDMI

User manual

· FAQ

*The product name and brand name may be registered trademark of

related manufacturers.TM and ® may be omitted on the user manual.

The pictures on the user manual are just for reference, and there may be

some slight difference with the real products.

We reserve the rights to make changes without further notice to a

product or system described herein to improve reliability, function or

design.

Disclaimer

Switch DOWN: use the Arabic numeral “0”to represent

Mode

DIP 1

DIP 2

DIP 3

EDID Info

480P@60Hz 2.1CH

480P@60Hz 7.1CH

720P@60Hz 2.1CH

Default: 1080P@60Hz 2.1CH

1080i@60Hz 2.1CH

720P@60Hz 7.1CH

1080P@60Hz 7.1CH

1080i@60Hz 7.1CH

Q: No output on screen?

A: 1 ) Firstly, please check and make sure the power supply is connected

well. Then, check and make sure all cables are connected correctly.

2 )Please check and make sure the right HDMI input por t of the

TV/ screen has been chosen.

3 )Please check and make sure there is HDMI signal to be fed into

transmitter unit, and check whether the receiver unit has

been connected well with the display device.

Q: Output image with snow point?

A: Change the HDMI cable between the transmitter unit and the source

device, it will be better to use a shor ter HDMI cable for re-testing.

HDCP 1.4

CAT Outputs 4xHDMI, 4x RJ45

CAT6 CAT6A CAT7、、

Transmission Distance

Network cable

40m

IR 20 ~ 60 KHz

HDMI 1.3

Power Consumption

Operating Temperature 0~ 0 °C5

Power DC V A12 / 3

Dimensions

Weight

480i@60Hz, 480p@60Hz, 576i@50Hz,

576p@50Hz, 720p@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz

Video

Resolutions(Max)

TX： g，RX： g 1530 80

TX: 411.0(L) x 146.0(W) x 31.5(H) mm

RX 71.6(L) x 66.6(W) x 22.6(H)mm:

TX 23 RX 3W< W，＜

RS232 9 pin serial port seat

Switch UP: use the Arabic numeral “1”to represent

5. EDID management

2) Read status command:ZRXXXXXXXXSW

When you send the read status command to HDMI matrix, if success,

it will return the status with command RDXXXXXXXXSW,

eg., if return RD1234XXXXSW, it means output 1,2,3,4 for input

1,2,3,4 port.

If return RD1111XXXXSW, it means all output 1,2,3,4 for input 1 port.

4. RS232 Control:

Connect to a PC or control sytem with D-Sub 9-pin cable for the

transmission of RS232 commands.

Baudrate: 9600

Command:

1) Switch Command: ZWXXXXXXXXSW

3rd byte

ZW XXXXXXXX

1st byte

2nd byte--output 1,2,3,4,5,6,7,8 for input port

For this product, there are only 4 outputs, so

the last byte use”XXXX” to replace.

Eg;

1)Command ZW1234XXXXSW means select

output 1,2,3,4 for input 1,2,3,4 port

2)Command ZW1111XXXXSW means select

output 1,2,3,4 for input 1 port

Please note: the Default EDID is 1080p@60Hz 2.1CH therefore the HDMI

Receiver will output the video & audio according to this. If your display

supports a different resolution and/or audio channel, please adjust

the EDID as below:

Produktspezifikationen

Marke:	Epcom
Kategorie:	Audio-/Video-Extender
Modell:	TT744
Produktfarbe:	Schwarz
Übertragungstechnik:	Kabelgebunden
Betriebstemperatur:	0 - 50 °C
Typ:	AV-Sender
HDCP:	Ja
Unterstützte Video-Modi:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Maximale Auflösung:	1920 x 1080 Pixel
Anzahl der HDMI-Ausgänge:	4
Maximal mögliche Übertragungsstrecke:	40 m
unterstütze Kabeltypen:	Cat5, Cat6, Cat7
Eingangssignal:	HDMI
Anzahl der Ausgänge:	4 Ausgänge
RJ-45-Ausgangsanschlüsse:	4