EnGenius EAP1750H Bedienungsanleitung

EnGenius Zugangspunkt EAP1750H

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EnGenius EAP1750H (66 Seiten) in der Kategorie Zugangspunkt. Dieser Bedienungsanleitung war für 33 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/66

User Manual

Business Solutions

Dual Band AC1750 Indoor Access Point

Ceiling Mount Design

EAP1750H

version 1.1

IMPORTANT

To install this Access Point please refer to the

Quick Installation Guide included in the product packaging.

Chapter 1 Product Overview................................................... 4

Key Features/Introduction........................................................... 5

System Requirements / Package Contents .............................. 6

Applications...................................................................................... 7

 TechnicalSpecications...............................................................8

Physical Interface........................................................................... 9

Chapter 2 Before You Begin .................................................. 10

Considerations for Wireless Installation............................. 11

Computer Settings....................................................................... 12

Hardware Installation................................................................. 15

Mounting the EAP1750H........................................................... 16

Chapter 3 Conguring Your Access Point.......................... 18

Default Settings............................................................................ 19

Chapter 4 Building a Wireless Network............................. 20

Access Point Mode....................................................................... 21

WDS AP Mode............................................................................... 22

WDS Bridge Mode........................................................................ 23

Chapter 5 Overview............................................................... 24

Overview........................................................................................... 25

Connections.................................................................................... 26

Chapter 6 Network ................................................................. 27

 OperationMode/Basic.................................................................28

IP Settings/SpanningTree Settings..................................... 29

Chapter 7 2.4 GHz & 5 GHz Wireless................................... 31

Wireless Network........................................................................ 32

Wireless Security......................................................................... 34

Guest Network............................................................................... 40

Fast Handover................................................................................ 41

Wireless MAC Filtering........................................................... 42

Wireless Advanced ..................................................................... 43

WPS (Wi-Fi Protected Setup)................................................. 44

WDS Link Settings....................................................................... 45

Chapter 8 Management........................................................ 46

Administration.............................................................................. 47

 Management VLAN Settings................................................. 48

 Wireless Trafc Shaping......................................................... 49

SNMP Settings............................................................................... 50

Backup/Restore Settings......................................................... 52

Auto Reboot Settings................................................................ 53

Firmware Upgrade/Time Settings............................................ 54

System Log/Tools.......................................................................... 56

Ping Test Parameters/Traceroute Parameters.................. 57

 SpeedTestParameters/LEDControl......................................58

Device Discovery/Reset..............................................................59

Appendix ................................................................................. 60

FCC Interference Statement.................................................. 61

IC Interference Statement.................................................... 62

CE Interference Statement..................................................... 64

Table of Contents

Chapter 1

Product Overview

Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between

devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered

Key Features

• Hightransmitpower,enablinglongrangeconnectivity

• SupportsIEEE802.11ac/b/g/nwirelessstandardswithupto450

Mbps data rate on 2.4GHz and 1300Mbps data rate on 5GHz

• Threeinternal4dBi(2.4GHz)andthree5dBi(5GHz)omni-directional

MIMO antennas

• CanbemonitoredafterdeploymentwithEnGeniusEZ  

Controller™ software for Windows

(Free online download)

• CanbeusedwithincludedpoweradapterorviaPoEwithPoE

 802.3at-capableSwitchesorInjectors

• DualBand/ThreeStream

• AdvancedTrafcshapingcanbeassisteduserstocontrolupload/

download wirelss speed per SSID

• BandSteeringshiftsdualbandclientstothe5GHzbandfortorelieve

network congestion on the 2.4 GHz band

• SecuredGuestNetwork

Introduction

The EAP1750H leverages the breakthrough speed and

performance 802.11ac for connecting to laptops and

other devices that need to wirelessly stream HD video or

transfer large les. The EAP1750H is an 802.11ac 3x3

Indoor Access Point. This high-powered ceiling mount Dual

Band Access Point features speeds up to 450 Mbps on

2.4 GHz and up to 1300 Mbps on the 5 GHz band when

Introduction

can be used with

802.3at

capable switches or injectors

associatedwithACclientdevices.Itcanbeconguredas

an Access Point or WDS (AP & Bridge) and features a high

transmitRFpowerof28dBmtransmitRFpoweronthe2.4

GHzbandand28dBmonthe5GHzbandforlongrange

connectivity. The EAP1750H includes a Gigabit Ethernet

portforconnectingto802.3at-capablePoESwitchesand

an enhanced receive sensitivity MIMO (Multiple In / Multiple

Out) integrated sectorized 3D antenna array. It’s an ideal

solution for spacious interior environments such as large

homes,smallandmedium-sizedbusinesses,multiple-oor

buildings,hotels,hospitals,andothervenues.

TheEAP1750Halsodeliversupto15xfasterwirelessspeeds

compared to legacy 802.11a/b/g wireless devices. Even

though the EAP1750H has been designed and engineered

for heavy trafc and demanding business environments,

inlargerhousingenvironmentsasitcanefcientlyextend

thewirelessrangeofanexistinghomerouter.Thismakes

itespeciallyidealinarchitecturally-challengingstructures,

providing whole home connectivity.

To protect sensitive data during wireless transmissions,

the EAP1750H offers different encryption settings for

wireless transmissions, including industry standard WPA

and WPA2 encryption. The EAP1750H also includes MAC

addresslteringtoallownetworkadministratorstooffer

network access only to known computers and other devices

based on their MAC addresses.

System Requirements

The following are the Minimum System Requirements in

ordercongurethedevice:

 • ComputerwithanEthernetinterfaceorwirelessnetwork 

capability

 • WindowsOS(XP,Vista,7,8,10),MacOS,orLinux-basedoperating

systems

 • Web-BrowsingApplication(i.e.:Edge,InternetExplorer,Firefox,

  Chrome,Safari,oranothersimilarbrowserapplication)

Package Contents

The EAP1750H package contains the following items (all

itemsmustbeinpackagetoissuearefund):

• EAP1750HAccessPoint

 • 12V/2APowerAdapter

 • RJ-45EthernetCable

 • QuickInstallationGuide

 • CeilingandWallMountScrewkit

 • T-RailMountingkit

 • MountingBracket

Applications

Wireless LAN (WLAN) products are easy to install and

highlyefcient.Thefollowinglistdescribessomeofthe

many applications made possible through the power and

exibilityofWLANs:

• Difcult-to-Wire Environments: There are many situations where

wirescannotbeinstalled,deployedeasily,orcannotbehiddenfrom

view. Older buildings, sites with multiple buildings, and/or areas

that make the installation of a Ethernet-based LAN impossible,

impracticalorexpensivearesiteswhereWLANcanbeanetwork

solution.

• Temporary Workgroups: Create temporary workgroups/networks

inmoreopenareaswithinabuilding;auditoriums,amphitheaters

classrooms, ballrooms, arenas, exhibition centers, or temporary

ofceswhereonewantseitherapermanentortemporaryWireless

LAN established.

• The Ability to Access Real-Time Information: Doctors/Nurses,

Point-of-Sale Employees, and/or Warehouse Workers can access

real-time information while dealing with patients, serving

customers,and/orprocessinginformation.

• Frequently Changing Environments: Set up networks in

environments that change frequently (i.e.: Show Rooms,

Exhibits,etc.).

• Small Ofce and Home Ofce (SOHO) Networks: SOHO users

require a cost-effective, easy, and quick installation of a small

network.

• Wireless Extensions to Existing Ethernet-based Networks:

Devices like the EAP1750H enable network administrators,

installers, and end-users to extend the range and reach of an

existingEthernet-basednetwork.

• Training/Educational Facilities: Training sites at corporations or

students at universities use wireless connectivity to exchange

information between peers and easily access information for

learning purposes.

Physical Interface

Dimensions and Weights

Diameter:6.36”

Height:1.64”

Weight:0.65lbs.

1 Reset Button: Press and hold for over 10 seconds to reset to

factory default settings.

2 LED Indicators: LED lights for WPS, WLAN 5G, WLAN 2.4G,

Ethernetport,andPower

3 LAN Port (802.3at PoE): EthernetportforRJ-45cable.

4 Power Connector: 12V DC IN for Power.

5 Ceiling (Wall) Mount Hole: Using the provided hardware, the

EAP1750H can be attached to a ceiling or wall.

6 Kensington Security Slot: ToprotectyourEAP1750H,usethe

Kensington Security Slot to attach a cable lock*.

*cable lock not included

3 4

Chapter 2

Before You Begin

This section will guide you through the installation process.

Placement of the EnGenius EAP1750H is essential to

maximizetheAccessPoint’sperformance.Avoidplacing

the EAP1750H in an enclosed space such as a closet,

cabinet,orstairwell.

Considerations for Wireless Installation

The operating distance of all wireless devices can often

not be pre-determined due to a number of unknown

obstacles in the environment in which the device is

deployed. Obstacles such as the number, thickness,

andlocationofwalls,ceilings,orotherobjectsthatthe

EAP1750H’s wireless signals must pass through can

weaken the signal. Here are some key guidelines for

allowing the EAP1750H to have an optimal wireless

range during setup.

• Keepthenumberofwallsand/orceilingsbetweentheEAP1750H

and other network devices to a minimum. Each wall and/or ceiling

canreducethesignalstrength,resultinginaloweroverallsignal

strength.

• Buildingmaterialsmakeadifference.Asolidmetaldoorand/or

aluminum stubs may have a signicant negative effect on the

signal strength of the EAP1750H. Locate your wireless devices

carefully so the signal can pass through drywall and/or open

doorways.Materialssuchasglass,steel,metal,concrete,water

(example:shtanks),mirrors,lecabinets,and/orbrickcanalso

diminish wireless signal strength.

• Interferencefromyourotherelectricaldevicesand/orappliances

that generate RF noise can also diminish the EAP1750H’s signal

strength. The most common types of devices are microwaves or

cordless phones.

Before You Begin

Windows XP/Windows 7

InordertousetheEAP1750H,youmustrstcongurethe

TCP/IPv4 connection of your Windows OS computer system.

1. Click the button and open the Start Control Panel.

2a. In Windows XP, Network Connections. click on

2b. In Windows 7,clickView Network Status and Tasks in

the Network and Internetsection,thenselect Change

Adapter Settings.

Right click on and select Local Area Connection

Properties.

Computer Settings

Windows XP Windows 7

4. Select Internet Protocol Version 4 (TCP/IPv4) and then

select Properties.

5. Select Use the following IP address and enter an IP

address that is different from the EAP1750H and Subnet

mask,thenclickOK.

Note: Ensure that the IP address and Subnet mask are

on the same subnet as the device.

Forexample:EAP1750HIPaddress:192.168.1.1

 PCIPaddress:192.168.1.2–192.168.1.255

 PCSubnetmask:255.255.255.0

Apple Mac OS X

1. Go to System Preferences (it can be opened in the

Applications folder or by electing it in the Apple Menu).

2. Select Network in the section.Internet & Network

3. Highlight Ethernet.

4. In Congure IPv4,selectManually.

5. Enter an IP address that is different from the EAP1750H

andSubnetmask,thenclickOK.

Note: Ensure that the IP address and Subnet mask are

on the same subnet as the device.

Forexample:EAP1750HIPaddress:192.168.1.1

 PCIPaddress:192.168.1.2–192.168.1.255

 PCSubnetmask:255.255.255.0

6. Click Applywhennished.

1. Ensure that the computer in use has an Ethernet

Controller port (RJ-45 Ethernet Port). For more

information,verifywithyourcomputer’susermanual.

2. Connect one end of the Category 5e Ethernet cable into

theRJ-45portoftheEAP1750Handtheotherendto

theRJ-45portofthecomputer.Ensurethatthecable

is securely connected to both the EAP1750H and the

computer.

3. Connect the Power Adapter DC connector to the DC-IN

port of the EAP1750H and the Power Adapter to an

available electrical outlet. Once both connections are

secure,verifythefollowing:

a) Ensure that the light is on (it will be POWER orange).

b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will

be blue greenfor2.4G,and for 5G).

c) EnsuregthatgthehLANg(ComputergEAP1750HgConnection)

light is on (it will be blue).

  d)Once all three lights are on, proceed to set up the

Access Point using the computer.

Thisdiagramdepictsthehardwareconguration.

Hardware Installation

Ethernet

Power

Outlet

AC/DC

Cable

Attaching the EAP1750H to a ceiling using the

provided T-Rail connectors:

1. Attach the T-Rail connectors to the bottom cover of the

EAP1750H using the provided short screws.

Note: Two sizes of T-Rail connectors are included in the

mounting hardware kit: 15/16in (2.38cm) and 9/16in

(1.43cm).Ifextraspaceisrequiredtoaccommodatedrop

ceilingtiles,usetheprovidedspacersandlongscrews.

2. Line up the connected T-Rail connectors with an

appropriately sized rail and press the unit onto the rail

until it snaps into place.

Note: ToprotectyourEAP1750H,usetheKensington

Security Slot to attach a cable lock (cable lock is not

included).

P2.6*10 Screw

Clip

T-Rail

Clip Clips

Spacer

P2.6*25 Screw

Chapter 3

Conguring Your Access Point

Chapter 4

Building a Wireless Network

The EAP1750H has the ability to operate in various modes. This chapter describes the operating modes of the EAP1750H.

Access Point Mode

InAccessPointMode,theEAP1750HbehaveslikeacentralconnectionforstationsorclientsthatsupportIEEE802.11a/b/g/n

networks.ThestationsandclientsmustbeconguredtousethesameSSID(ServiceSetIdentier)andsecuritypasswordto

associatewiththeEAP1750H.TheEAP1750Hsupportsuptoeight(8)SSIDsperband(16total)atthesametimeforsecure

access.

EAP 1750H

AP/AP

Client

Client Client

Client

2.4 GHz 5 GHz

WDS AP Mode

The EAP1750H also supports WDS AP mode. This operating mode allows wireless connections to the EAP1750H using

WDStechnology.Inthismode,conguretheMACaddressesinbothAccessPointstoenlargethewirelessareabyenabling

WDS Link settings. WDS supports up to four (4) AP MAC addresses.

EAP1750H

WDS AP

EAP1750H

WDS AP

2.4 GHz 2.4 GHz

5 GHz 5 GHz

Client

Client Client

Client

Computer

Client

Computer

WDS Bridge Mode

InWDSBridgeMode,theEAP1750HcanwirelesslyconnectdifferentLANsbyconguringtheMACaddressandsecurity

settings of each EAP1750H device. Use this mode when two wired LANs located a small distance apart want to communicate

witheachother.ThebestsolutionistousetheEAP1750HtowirelesslyconnecttwowiredLANs,asshowninthefollowing

gure.WDSBridgeModecanestablishuptofour(4)WDSlinks,creatingastar-likenetwork.

Note: WDS Bridge Mode does act as an Access Point because Access Points linked by WDS use the same frequency not

channel.MoreAccessPointsconnectedtogethermaylowerthroughput.Thiscongurationcanalsobesusceptibleto

generateendlessnetworkloopsinyournetwork,soitisrecommendedtoenabletheSpanningTreefeaturetoprevent

thisfromhappening.YoucanndinformationabouttheSpanningTreeFunctiononpage29.

EAP1750H

WDS Bridge

EAP1750H

WDS Bridge

EAP1750H

WDS Bridge

Client

Computer

Client

Computer

Client

Computer

Chapter 5

Overview

The Overviewsectioncontainsthefollowingoptions:

• DeviceStatus

• Connections

Thefollowingsectionsdescribetheseoptions:

Device Status

Clicking the link under the menu Device Status Overview

shows the status information about the current operating

mode.

•  The Device Status section shows general system

informationsuchasDeviceName,MACaddress,Current

Time,FirmwareVersion,andManagementVLANID.

Note: VLAN ID is only applicable in Access Point or WDS

AP mode.

•  The LAN Information section under the Connections

link shows the Local Area Network settings such as the

LANIPAddress,Subnetmask,Gateway,DNSAddress,

DHCPClient,andSTPstatus.

•  The Current 2.4 GHz/5 GHz Wireless Settings

section under the link under the menu Basic Network

shows wireless information such as Operation Modes,

Frequency,andChannel.SincetheEAP1750Hsupports

multiple-SSIDs,informationabouteachSSIDandsecurity

settings are displayed.

Note: ProleSettingsisonlyapplicableinAccessPoint

or WDS AP mode.

Connections

The EAP1750H automatically logs (records) events of

possible interest in its internal memory. To view the

logged information, click the Connections link under

the Device Status menu. If there is not enough internal

memorytologallevents,oldereventsaredeletedfrom

thelog.Whenpowereddownorrebooted,thelogwillbe

cleared.

Click to refresh the Connections List page. Refresh

Operation Modes

TheEAP1750Hsupportsthreeoperationmodes:

AccessPoint,WDSAP,andWDSBridge.

Device Settings

Toaccessoperationmode,clicktheWireless link under the

Network menu. You will see customizable wireless settings

options for both 2.4 GHz and 5 GHz bands. Under Wireless

settings,youwillsee:

Device Name: Enter a name for the device. The name you

type will appear in SNMP management. This name is not

the SSID and is not broadcasted to other devices.

Country/Region: Select a Country/Region to conform to

local regulations.

Operation Mode: Select an operating mode from the

drop-down list.

Band Steering: Enable Band Steering to so D e t e c t s

and allows Dual Band clients to shift to the 5 GHz band

fromthe2.4GHzband,relievingnetworkcongestionand

maintainoptimaldatatrafcow.

*Note:InorderfortheBandSteeringfeaturetoworkproperly,

both the 2.4 Ghz and the 5 GHz SSID and security settings must be

conguredunderthesamesettings.

Basic

This page allows you to modify the device’s IP settings.

IP Network Settings

Select whether the device IP address will use the static

IPaddressspeciedintheIPAddresseldorbeobtained

automatically when the device connects to a DHCP server.

IP Address: Displays the IP Address of this device.

IP Subnet Mask: Displays the IP Subnet mask of this device.

Gateway: Displays the Default Gateway of this device.

Leave it blank if you are unsure of this setting.

Primary/Secondary DNS: Displays the primary/secondary

DNS address for this device.

Click Save toapplytheconguration.

Spanning Tree Settings

This page allows you to modify the Spanning Tree settings.

Enabling Spanning Tree protocol will prevent network loops

in your LAN network.

Spanning Tree Status:EnablesordisablestheSpanning

Tree feature.

Hello Time:SpeciestheBridgeHelloTime,inseconds.This

value determines how often the device sends handshake

packets to communicate information about the topology

throughout the entire Bridged Local Area Network.

Max Age: Species the Bridge Max Age, in seconds. If

another bridge in the spanning tree does not send a hello

packetforalongperiodoftime,itisassumedtobeinactive.

Forward Delay: Specifes the Bridge Forward Delay, in

seconds. Forwarding Delay Time is the time spent in each

of the Listening and Learning states before the Forwarding

state is entered. This delay is provided so that when a new

bridgecomesontoabusynetwork,itanalyzesdatatrafc

before participating.

Priority: SpeciesthePriorityNumber.Asmallernumber

has a greater priority.

Save: Click Savetoconrmthechanges.

Chapter 7

2.4 GHz & 5 GHz Wireless

Produktspezifikationen

Marke:	EnGenius
Kategorie:	Zugangspunkt
Modell:	EAP1750H

Brauchst du Hilfe?

Wenn Sie Hilfe mit EnGenius EAP1750H benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Zugangspunkt EnGenius

EnGenius ENH200 Bedienungsanleitung

1 Oktober 2024

EnGenius ECW220S Bedienungsanleitung

17 September 2024

EnGenius EOC5611P Bedienungsanleitung

17 August 2024

EnGenius EWS385AP Bedienungsanleitung

14 August 2024

EnGenius ETA1305 Bedienungsanleitung

10 August 2024

EnGenius ENS500EXT-AC Bedienungsanleitung

4 August 2024

EnGenius EOC2611P Bedienungsanleitung

2 August 2024

EnGenius EWS850-FIT Bedienungsanleitung

1 August 2024

EnGenius EnStation2 Bedienungsanleitung

30 Juli 2024

EnGenius ECB-3220 Bedienungsanleitung

29 Juli 2024

Bedienungsanleitung Zugangspunkt

Neueste Bedienungsanleitung für -Kategorien-

Netgear WAX210 Bedienungsanleitung

2 Dezember 2024

DrayTek VigorAP 920R Bedienungsanleitung

13 Oktober 2024

Cisco Aironet 3700P Bedienungsanleitung

11 Oktober 2024

Cisco Aironet 1815m Bedienungsanleitung

8 Oktober 2024

TP-Link Festa F65-Wall Bedienungsanleitung

4 Oktober 2024

Cisco AIR-CAP702I-I-K9 Bedienungsanleitung

4 Oktober 2024

Mikrotik OmniTIK 5 PoE ac Bedienungsanleitung

1 Oktober 2024

Dell PowerConnect W-IAP3WNP Bedienungsanleitung

29 September 2024

Mikrotik Cube Lite60 Bedienungsanleitung

28 September 2024

D-Link DWL-1000AP+ Bedienungsanleitung

24 September 2024