EnerGenie MIHO069 Bedienungsanleitung

EnerGenie Thermostat MIHO069

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EnerGenie MIHO069 (3 Seiten) in der Kategorie Thermostat. Dieser Bedienungsanleitung war für 47 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

The MiHome Thermostat is part of Energenie’s heating

range of products and part of the MiHome home

automation range. The heating range includes the radio

controlled MiHome thermostat, radio controlled radiator

valves*.

MiHome products link directly to the MiHome Gateway*

which provides the communications between your

MiHome device and the internet.

(* MiHome Gateway, radiator valves are available to

purchase separately)

The MiHome thermostat is suitable for switching any

standard domestic boiler (see product specication

below). Control of the thermostat is by radio control using

either the Android or IOS smartphone App, or by using the

MiHome server web portal, in conjunction with an internet

connected Gateway

In the Box:

- MiHome Thermostat (Product Code MIHO069)

- Batteries (2 x AA (LR6))

- Screw Fittings (please note that while we provide screw

ttings it is your responsibility to check their compatibility

with the surface to which you are xing the thermostat).

Installation

MUST BE INSTALLED BY A

COMPETENT PERSON

1. Remove your old thermostat, if it is

necessary cut the power o in the

installation area

2. Remove the back of the thermostat

by inserting your nger into the

opening and pulling back the panel

connections box

3. Enter the connection cables

to the boiler through the hole in

the connections box.

4. Screw the connections box to

the wall, using either the xings

included in the package, or if

they are unsuitable for your

wall material please use

alternative xings

5. Connect the control wires to the W and COM

terminals on the connections box. If the cable is rigid, you

can enter it directly. If its exible, you may need help from

the tip of a pen to press on the thermostat terminal block.

6. Insert the batteries into the

thermostat. The LED will ash

three times, indicating that

they have been inserted correctly.

7. Fit the thermostat to the

connections box on the wall

and your thermostat is now

ready to use

Pairing with the MiHome Gateway

To pair the thermostat to your MiHome Gateway, follow the

instructions below to pair using either the MiHome App or

the web browser. When requested by the app/web

browser, put the thermostat into pairing mode by pressing

the ‘M’ button on the side of the unit until the pairing LED

icon starts to ash (approx. 3 seconds). Successful pairing

will be indicated on the app or MiHome server web portal

by a message, and the pairing LED icon on the unit’s

display will stop ashing and stay steady on.

Smartphone:

1. Log into your MiHome account on the MiHome App

(Available for free on both iOS and Android platforms)

2. Select Add a new device from the menu and choose

Thermostat.

3. Follow on-screen pairing instructions

Web Browser

1. Log into your MiHome account at mihome4u.co.uk.

2. Select Pair New Device from the

mihome4u.co.uk/devices

3. Select the Thermostat, followed by Pair Device and

follow the on screen pairing instructions

Mi|Home Thermostat

User Guide

Remote Control Operation

Once paired with the MiHome gateway all functions of

the MiHome thermostat can be controlled and viewed

through the Smartphone App and Web portal.

Available functions include:

- Set the target temperature

- View current and historical graphs of ambient

temperature and relative humidity

- Set up a schedule

- Setup Geofencing to automatically switch your heating

when you’re away

- Choose between Comfort and Eco modes

- Choose a battery-saving summer mode

- Congure MiHome TRVs to work with the MiHome

Thermostat

Conguring the Thermostat

Display (1)

Swipe to view temperature, humidity and motion.

Manual On/O control (2)

The thermostat may be set to either:

On - normal operation, powered on, controlling the heating,

and reporting temperature, humidity, and motion.

Button shows green when selected, otherwise light grey.

O - standby mode, powered on, not controlling the

heating, but still reporting temperature, humidity and

motion. Button shows dark grey when selected, otherwise

light grey.

On and O may be set from the MiHome server on the

web browser, from the MiHome smartphone app device

list, or from the thermostat page on the MiHome

smartphone app.

Set the Target Temperature (3)

The target temperature may be set in 0.5°C steps using the

slider control on either the web browser, or smartphone

app. The temperature is shown on the slider itself (point 3)

and the Target Temperature dial.

Comfort and Eco mode (4)

Comfort mode keeps the temperature control close to the

target temperature, whereas Eco mode will allow the

temperature to fall lower than Comfort mode before

switching the boiler back on. This may be set from the

Comfort/Eco selector on the main page. The margins for

Comfort and Eco mode may be set in the settings section

on either the web browser, or smartphone app.

Programmes (5)

Programmes comprise of an On time, an O time, any or all

days of the week, and a target temperature which together

provide for controlled operation of the heating system.

Multiple programmes may be congured for each

thermostat. These programmes may be set on either the

web browser, or smartphone app.

Name your thermostat (6)

The thermostat may be given a logical/descriptive

name via the Rename Your Device section on either

the web browser, or smartphone app.

Geofencing (7)

Geofencing uses the GPS technology on your smartphone

(Apple or Android) to create a virtual geographic boundary,

enabling software to perform a trigger activity when your

mobile device enters or leaves a particular geographical

area.

This returns you to the eTRV screen which now displays

the Thermostat being followed, and the “Thermostat

Overrides” option

Thermostat Overrides

An Override timer allows an eTRV that is following a

Thermostat to ignore the target temperature of the

Thermostat for a period. The timer will specify the time of

the override, the days to activate the override and the

desired temperature during this time. To set an Override

timer select your desired eTRV, then select the “Thermostat

Overrides” option.

Create the Override by dening the target temperature,

times and days as required then save.

This will save the record showing an overview of the

Override.

Selecting back returns you to the eTRV screen which now

displays the number of Overrides created in the circle to

the right of “Thermostat Overrides”.

Unfollow Thermostat

From the eTRV page, select the “Following …” option that

shows the name of your thermostat.

On the following page, select the option “Tap to unfollow”

and save.

Safety

If you do not install and use in line with this guide the

warranty will become invalidated and we will not be

liable for any damage or loss whatsoever, including

indirect loss, damage to property or personal injury.

You must only use the product in dry areas indoors, and

it must be protected from moisture and water.

Do not disassemble as it does not contain any parts to

service. If it arrives faulty, return it to where you bought

it. Your statutory rights are not aected.

Further Help

For more help, look online at

mihome4u.co.uk/troubleshooting and

www.energenie4u.co.uk, or contact our helpful support

team in the UK via 08000 469 466 or

support@mihome4u.co.uk

Further contact methods can be found at:

energenie4u.co.uk/about_us/contact_us

Parameter Settings

Produktspezifikationen

Marke:	EnerGenie
Kategorie:	Thermostat
Modell:	MIHO069
Breite:	100 mm
Tiefe:	25 mm
Gewicht:	150 g
Produktfarbe:	Black, White
Akku-/Batterietyp:	AA
Höhe:	100 mm
Energiequelle:	Wechselstrom/Batterie
Display:	LED
Anzahl unterstützter Akkus/Batterien:	2
Schnittstelle:	RF
Feuchtigkeitssensor:	Ja
Maximale Schaltspannung:	230 V
Maximaler Schaltstrom:	0.25 A
Genauigkeit:	0.3 °C
Spannung:	220-240 V
Temperatursensor:	Ja
Maximum Außenabstand:	30 m
Frequenz:	433 MHz