EnerGenie ENER009 Bedienungsanleitung

EnerGenie Anbaustein ENER009

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für EnerGenie ENER009 (1 Seiten) in der Kategorie Anbaustein. Dieser Bedienungsanleitung war für 35 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/1

Audio Visual – Automatic Standby Shutdown

OOOOperation (see pictureperation (see pictureperation (see pictureperation (see picture): ): ): ):

a. Plug your TV, DVD player, Power Amplifier into any of the 4

controlled sockets of the AV Standby Shutdown.

Plug any device requiring continuous power into the always

on socket.

b. Plug the AV Standby Shutdown into a mains wall socket

(ensure the wall socket is turned 0N).

c. Stick the IR signal receiver (1) on the front panel of your TV

(near to the infrared receiver window of the TV).

Power LearningPower LearningPower LearningPower Learning: : : :

After the appliances have been plugged in and mains switched on,

you will see the operation indicator light is flashing – if not press the

button on the device for 4 seconds at least until the light flashes.

Press the power button on any of your remote controllers and aim at

the infrared signal receiver until the indicator light stops flashing and

remains illuminated. The device is now in power learning mode

power learning modepower learning mode

power learning mode.

Place all your connected devices into Standby and wait for at least 30

seconds.

Then press the button on the device to end the learning cycle. The

light will turn off.

-To turn ON the Sockets

To turn ON the SocketsTo turn ON the Sockets

To turn ON the Sockets:

: :

Aim your TV remote at the sensor and the TV and press the power

button until the TV turns on. The light on the AV Standby Shutdown

will illuminate indicating all the controlled sockets are re-powered. *

-To tur

To turTo tur

To turn OFF

n OFFn OFF

n OFF

Press the power button on your TV remote control and your TV will go

into standby. After 1 minute, the AV Standby Shutdown will

automaticallyautomaticallyautomaticallyautomatically turn off the power to all the controlled sockets.

Note

: You may also press the button on the front of the AV Standby

Shutdown device to re-enable the controlled sockets.

SpecificationSpecificationSpecificationSpecification

Voltage: 240V~ 50Hz

Max .current: 13A

Max. load: 3kW

Colour: Black/White

Mains cable: 1.5m

Sensor cable: 1.3m

4 controlled sockets

1 always ON socket

Product code: ENER009

Power consumption in standby: <1W.

Potential energy saved per year: 0.018KWH *

20 hours (average standby time)* 365

days/year = 0 131.4KWH

Note

: The AV Standby Shutdown will retain its

memory after a loss of power.

If you wish to change the number of

connected appliances you will need to re-

program the device. Press the button on the

front of the device for 4 seconds to clear the

previously set power level.

The indicator light will start flashing ready.

Then repeat the power learning process.

Produktspezifikationen

Marke:	EnerGenie
Kategorie:	Anbaustein
Modell:	ENER009
Produktfarbe:	Black, White
AC Eingangsspannung:	240 V
AC Eingangsfrequenz:	50 Hz
Kabellänge:	1.5 m
Ein-/Ausschalter:	Ja
Stromstecker-Typ:	Typ G
Anzeigelicht:	Ja
Kabelfarbe:	Weiß
Maximale Eingangsleistung:	3000 W
Unterstützung von Positionierung:	Indoor
Anzahl der AC-Ausgänge:	5 AC-Ausgänge
Stromstärke (maximal):	13 A