Emtec X150 Bedienungsanleitung
Lesen Sie kostenlos die đ deutsche Bedienungsanleitung fĂŒr Emtec X150 (3 Seiten) in der Kategorie Solid-State-Laufwerke (SSD). Dieser Bedienungsanleitung war fĂŒr 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet
Seite 1/3
X150 2.5ââ SATA
STOP! IMPORTANT INFORMATION.
READ THE FOLLOWING CAREFULLY BEFORE USING THE EMTEC SSD.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Safety & Handling Instructions:
Avoid touching the Emtec SSDâs connector. Handle the Emtec SSD using its edge or frame. Do not remove, damage or cover any
product labels. Removal of such labels voids the warranty.
Ensure the Emtec SSD does not exceed following operating temperature:
- Minimum : 0°C
- Maximum : 70°C
Exercise caution when removing the Emtec SSD from the Desktop/Notebook as the Emtec SSD may have heated up.
Keep the Emtec SSD away from sinks, drinks, bathtubs, showers, rain and other sources of moisture.
Moisture can cause electric shocks with any electronic device. Do not disassemble, crush, short circuit or incinerate the Emtec SSD
as it may cause ïŹre, injury, burns or other hazards.
Installation Guidelines:
Before installing the Emtec SSD please take all necessary precautions to comply with the Desktop/Notebook manufacturerâs
handling instructions.
1. Power oïŹ the Desktop/Notebook and disconnect the main power cord from the wall outlet. If the Desktop/Notebook uses a
removable battery, remove the battery.
2. Refer to the manufacturerâs instructions for details on how to remove the computer's outer case, and where the SATA connectors
are located on the motherboard.
3. According to the machine type:
a) Desktop: Connect the Emtec SATA SSD to the SATA data cable and insert the SATA cable into the SATA connector on the
motherboard.
Once you have installed the Emtec SATA SSD, put back the computer cover and plug back the power supply.
b) Notebook: Slide the Emtec SSDâs SATA connector into the Notebookâs SATA connector.
If necessary,reinstall the removable battery and plug back the power supply.
4. Power on the system to verify that the installation was successful.
Additional Safety Instructions:
Keep the Emtec SSD drive away from direct sunlight, moisture and extremes temperatures. Do not bend, ïŹex or drop your Emtec
SSD drive. The user is responsible for complying with all environmental, safety and other usage speciïŹcations outlined in the Product
Manual.
For any further enquiries, please visit EMTEC website : http://www.emtec-international.com
Disposal Instructions:
Do not dispose the Emtec SSD with unsorted waste. Improper disposal may be harmful to the environment and human health.
Please refer to your local waste authority for information on return and collection systems in your area.
Data backup:
To prevent data loss, we strongly recommend to proceed at least to a backup of your data. Any data loss or corruption while using
SSD is the sole responsibility of the user. Under any circumstances will the manufacturer be held liable for compensation or data
recovery.
Warranty:
This SSD has 3 years warranty from date of purchase. Within the warranty period, we will repair or replace your SSD in case of
material or functional defect. We do not take any responsibility in case of data loss. It is suggested that one regularly backs up their
personal data.
The warranty does not apply:
1) For damages caused by natural disaster.
2) If the SSD has been repaired or dismounted by unauthorized persons.
3) If the product has been destroyed voluntarily or unvoluntarily.
4) If the warranty label or capacity information have been changed or removed, if the serial number does not appear clearly or does
not match.
5) If the SSD was bought from unauthorized channel.
6) If the warranty period has expired.
Manufacturer declarations / DĂ©clarations du fabricant / Declaraciones del fabricante / Dichiarazioni del fabbricante /
HerstellererklÀrungen / DeclaraçÔes do fabricante / Aangiften van de fabrikant / Deklaracje producenta
USA
FCC / CEC
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment oïŹ and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit diïŹerent from that to which
the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Canada
ICES- 003
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le prĂ©sent appareil est conforme aux CNR dâIndustrie Canada applicable aux appareils radio exempts de
licence. Lâexploitation est autorisĂ©e aux deux conditions suivantes : (1) lâappareil ne doit pas produire de
brouillage, et (2) lâutilisateur de lâappareil doit accepter tout brouillage radioĂ©lectrique subi, meme si le brouillage
est susceptible dâen compromettre le fonctionnement.
Europe
CE
Australia /
New Zealand
RCM
Our goods come with guarantees that cannot be excluded
under the Australian Consumer Law.
You are entitled to a replacement or refund for a major
failure and compensation for any other reasonably
foreseeable loss or damage.You are also entitled to have
the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to
a major failure
Environmental
ROHS
Reach
WEEE
Please dispose of this product by taking it to your local collection point or recycling center for such equipment.
Veillez Ă la mise au rebut appropriĂ©e de ce produit de en lâamenant Ă votre point de collecte local ou au centre
recyclage prévu pour traiter ce type de matériel.
Por favor, si desea deshacerse de este producto, llévelo a su punto local de recogida o un centro de reciclaje
para equipos electrĂłnicos como este.
Smaltire il prodotto portandolo al punto di raccolta locale o Centro di riciclaggio per tali apparecchiature.
Entsorgen Sie das Produkt in einer lokalen Sammelstelle oder in einem fĂŒr diese Art von GerĂ€ten zustĂ€ndigen
Recycling-Zentrum.
Dirija-se ao ponto de recolha do seu local ou ao centro de reciclagem para deitar fora este produto.
Verwerk dit product als afval door het naar uw plaatselijk ophaalpunt of recyclagecentrum voor dergelijke
uitrustingte brengen.
Prosimy wyrzucic ten produkt w najblizszym lokalnym punkcie zbierania odpadĂłw lub centrum odzysku tego typu
sprzetu.
EU :
DEXXON GROUPE
79 avenue Louis Roche
92230 Gennevilliers - France
USA/CANADA:
DEXXXON DIGITAL STORAGE / DEXXXON LOGISTICS
7611 Green Meadows Drive Lewis Center
OH 43035 USA â
EMTEC and EMTEC Logo are registered trademarks of DEXXON Groupe. All other trademarks are the property of their respective owners.
MODEL NUMBER : X1 50
Produktspezifikationen
| Marke: | Emtec |
| Kategorie: | Solid-State-Laufwerke (SSD) |
| Modell: | X150 |
Brauchst du Hilfe?
Wenn Sie Hilfe mit Emtec X150 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten
Bedienungsanleitung Solid-State-Laufwerke (SSD) Emtec
8 August 2024
Bedienungsanleitung Solid-State-Laufwerke (SSD)
- Solid-State-Laufwerke (SSD) Samsung
- Solid-State-Laufwerke (SSD) Corsair
- Solid-State-Laufwerke (SSD) Gigabyte
- Solid-State-Laufwerke (SSD) Sony
- Solid-State-Laufwerke (SSD) Verbatim
- Solid-State-Laufwerke (SSD) Buffalo
- Solid-State-Laufwerke (SSD) Fantec
- Solid-State-Laufwerke (SSD) TrekStor
- Solid-State-Laufwerke (SSD) Western Digital
- Solid-State-Laufwerke (SSD) ADATA
- Solid-State-Laufwerke (SSD) Seagate
- Solid-State-Laufwerke (SSD) SanDisk
- Solid-State-Laufwerke (SSD) Freecom
- Solid-State-Laufwerke (SSD) IStorage
- Solid-State-Laufwerke (SSD) Transcend
- Solid-State-Laufwerke (SSD) LaCie
- Solid-State-Laufwerke (SSD) Zotac
- Solid-State-Laufwerke (SSD) Intel
- Solid-State-Laufwerke (SSD) Kingston
- Solid-State-Laufwerke (SSD) Aluratek
- Solid-State-Laufwerke (SSD) XPG
- Solid-State-Laufwerke (SSD) Advantech
- Solid-State-Laufwerke (SSD) OWC
- Solid-State-Laufwerke (SSD) Crucial
- Solid-State-Laufwerke (SSD) Patriot
- Solid-State-Laufwerke (SSD) DIGISTOR
- Solid-State-Laufwerke (SSD) G-Technology
- Solid-State-Laufwerke (SSD) Origin Storage
- Solid-State-Laufwerke (SSD) Silicon Power
- Solid-State-Laufwerke (SSD) ATP
- Solid-State-Laufwerke (SSD) Kingston Technology
- Solid-State-Laufwerke (SSD) Goodram
- Solid-State-Laufwerke (SSD) Kioxia
- Solid-State-Laufwerke (SSD) SK Hynix
Neueste Bedienungsanleitung fĂŒr -Kategorien-
3 Oktober 2024
3 Oktober 2024
3 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024