Eminent EM8676 Bedienungsanleitung

Eminent Sicherheitszugangskontrollsystem EM8676

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Eminent EM8676 (9 Seiten) in der Kategorie Sicherheitszugangskontrollsystem. Dieser Bedienungsanleitung war für 31 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/9

EM8676

Indoor Siren with ﬂashlight

ENGLISH

EM8676 - Indoor Siren with ﬂashlight

Table of contents

1.0 Introduction ........................................................................................................... 2

2.0 General Instruction ................................................................................................ 2

3.0 Functions ............................................................................................................... 3

4.0 Connect the siren to the alarm system ................................................................... 3

5.0 Use the siren as standalone alarm system............................................................. 4

5.1 Connect wireless accessories ............................................................................ 4

5.2 Entry and exit delay time ................................................................................... 4

6.0 Reset the siren ...................................................................................................... 4

7.0 Frequently Asked Questions and other related information .................................... 5

8.0 Service and support ............................................................................................... 5

9.0 Warning and points of attention ............................................................................. 5

10.0 Warranty conditions ............................................................................................. 7

11.0 Declaration of Conformity .................................................................................... 8

1.0 Introduction

Congratulations with the purchase of this high-quality Eminent product! This product

has undergone extensive testing by Eminent’s technical experts. Should you

experience any problems with this product, you are covered by a ﬁve-year Eminent

warranty. Please keep this manual and the receipt in a safe place.

2.0 General Instruction

The signal of the wireless siren is transmitted by wireless radio frequency which

improves the ﬂexibility to install. It is powered by the adapter, which avoids the cable

wiring cost. Users can install more wireless sirens in diﬀerent places indoor to deter

the illegal intruders.

Many wireless sirens in diﬀerent places can be wirelessly connected with the alarm

panel to build a system. When the alarm panel is alarming, wireless sirens will hoot

and the strobe lights will ﬂash.

The wireless siren can also be used as a stand-alone alarm system. You can connect

diﬀerent wireless accessories and remote controls to the siren to build an alarm

system.

ENGLISH

3.0 Functions

1. Connect button

2. Strobe light

3. Siren

4.0 Connect the siren to the alarm system

Connect the siren to the mains.

Press the connect button (0,5 seconds). The Siren will beep once. 3 seconds later it

will give another beep and the strobe light ﬂashes. The siren is now ready to connect

to the alarm system.

Now press the arm button on the alarm panel. The wireless siren is now connected

to the alarm system after one beep.

Press the connect button from siren again to exit the connecting status.

Note : don’t trigger any other accessories while the siren is in connecting state !

Now test the connection between the alarm system and the siren.

Press the arm button on the alarm panel. Trigger one of the accessories and

check if both the alarm panel and the siren will hoot. If the siren is not responding to

the alarm panel, please repeat above steps.

Produktspezifikationen

Marke:	Eminent
Kategorie:	Sicherheitszugangskontrollsystem
Modell:	EM8676
Gewicht:	90 g
Relative Luftfeuchtigkeit in Betrieb:	-10 - 55 %
Energieverbrauch:	100 mA
Energiebedarf:	230V AC
Abmessungen (BxTxH):	90 x 43 x 90 mm
Funkfrequenz:	433 MHz
Warnung Dezibel:	90 dB
Maximaler Arbeitsabstand:	80 m
Bereitschaftsstrom:	13 mA