Emerson SA1-02003XS Bedienungsanleitung

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Emerson SA1-02003XS (2 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 23 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/2
GEISTâ„¢ SWITCH IRA
AIRFLOW MANAGEMENT DEVICE
Quick Installation Guide
VM1193/590-2228-501A 1
Models:
SA1-02003, SA1-02003XS
Switch Type:
Rear air intake-front (port) exhaust
2U switch or two 1U switches
CAUTION: Ensure the required
airflow for safe operation of
equipment is not compromised
when installing the Geist SwitchAir
device.
WARNING: Take precaution to
avoid interference with the switch’s
input power cords when installing
behind a live switch.
1. Preparing for installation
Before installing the SwitchAir
device, remove and save the
upper and lower screws that
attach each of the two switch
mounting bracket rails (left and
right) to the front rack uprights
(if necessary). Leave the middle
screws in place.
The SwitchAir device is not
shipped in the fully extended
position. Pull evenly on the
chassis mounting tabs for the
desired depth.
2. Installing the device
Insert the SwitchAir device into
the open rack space at the
same U height as the 2U switch
(or two 1U switches). As the
SwitchAir device is pushed into
the space, the SwitchAir rail
tabs engage the switch
mounting bracket rails for
support during installation.
Keep pushing the SwitchAir
device into the space until the
SwitchAir front chassis
mounting tabs are flush with
the rack’s front rails.
Reinstall the previously
removed screws to complete
the installation.
Geist SwitchAir Airflow Management Device
Geist SwitchAir Rack Installation
Switch
Switch mounting
bracket rails
Top and
bottom screws
Rack uprights
Expand to
fit
Rail tab
Rail tab
To contact Vertiv Technical Support: visit www.VertivCo.com
© 2019 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names,
trademarks or registered trademarks of their respective owners. While every precaution has been taken to ensure accuracy and completeness herein, Vertiv Co. assumes no
responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
2 VM1193/590-2228-501A

Produktspezifikationen

Marke: Emerson
Kategorie: Nicht kategorisiert
Modell: SA1-02003XS
Breite: 105.4 mm
Tiefe: 146 mm
Gewicht: 6800 g
Produktfarbe: Schwarz
Betriebsanleitung: Ja
Rack-Einbau: Ja
Nachhaltigkeitszertifikate: RoHS
Rahmentyp: Offener Rahmen
Kühlung: Passiv
Rack-Kapazität: 2U

Brauchst du Hilfe?

Wenn Sie Hilfe mit Emerson SA1-02003XS benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Nicht kategorisiert Emerson

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-