Emerson ER100120 Bedienungsanleitung

Emerson Nicht kategorisiert ER100120

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Emerson ER100120 (4 Seiten) in der Kategorie Nicht kategorisiert. Dieser Bedienungsanleitung war für 14 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/4

Fast Wireless Charging

SmartSet ® Clock Radio

with Bluetooth Stereo Speaker,

USB Charge Out and

1.2” Blue LED Display

OWNER’S MANUAL

ER100120

1 WARNING

TO PREVENT ELECTRIC SHOCK HAZARD, DO NOT CONNECT TO MAINS POWER SUPPLY WHILE

GRILLE IS REMOVED.TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

APPARATUS TO RAIN OR MOISTURE.

POUR ÉVITER TOUT DANGER DE CHOC ÉLECTRIQUE, NE PAS RACCORDER AU SECTEUR TANT QUE

LA GRILLE N'APAS ÉTÉ REMISE EN PLACE.POUR RÉDUIRE LE RISQUE D’INCENDIE OU DE CHOC

ÉLECTRIQUE, NE PAS EXPOSER CET APPAREIL SOUS LA PLUIE

ET L’HUMIDITÉ.

IMPORTANT SAFETY INSTRUCTIONS

1) Read these instructions. Keep these instructions. Follow all instructions. Heed all warnings.

2) Do not use this apparatus near water.

3) Clean only with dry cloth.

4) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

5) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliers) that produce heat.

6) Do not defeat the safety purpose of the polarized or grounding-type plug. polarized plug has two blades A

with one wider than the other. grounding type plug has two blades and third grounding prong. The wide A a

blade or the third prong is provided for your safety. If the provided plug into your outlet, consult does not ﬁt

an electrician for replacement of the obsolete outlet.

7) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and

the point where they exit from the apparatus.

8) Only use attachments / accessories specied by the manufacturer.

9) Unplug this apparatus during lightning storms or when unused for long periods of time.

10) Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

11) Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury

from tip-over.

12) The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such

as vases, shall be placed on apparatus.

l'appareil ne doit pas être exposé à des égouttements d'eau ou des éclaboussures et de plus

qu'aucun objet rempli de liquide tel que des vases ne doit être placé sur l'appareil.

13) Mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect

the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely.

La prise secteur est utilisée comme dispositif de déconnexion et devrait rester facilement utilisable pendant l'utilisation

prévue. Aﬁn de déconnecter l'appareil decomplètement le secteur, la prise secteur doit être déconnectée duprise de courant

complètement.

14) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, re or the like.

les batteries (bloc de batteries ou batteries installées) ne doivent pas être exposées à une chaleur excessive telle que celle

du soleil, d'un feu ou d'origine similaire .

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

ATTENTIN: Pour éviter tout danger de choc électrique, ne pas raccorder au secteur tant que la grille n'apas été remise en place.

* Les marquages sont inscrits en bas de l'appareil. Les précautions d'emploi sont inscrites en bas de l'appareil.

La prise du secteur ne doit pas ētre obstruée ou doit ētre facilement accessible pendant son utilisation.

Pour étre complètement déconnecté de l'alimentation d'entrée, la prise doit ētre débranchée du secteur.

Les piles ne doivent pas ētre exposées à de forte chaleur, tel qu'á la lumière du soleil, au feu ou autres choses de semblable.

La prise du secteur est utilisé pour déconnecter le système.

La prise du secteur ne doit pas être obstruée ou doit être facilement accessible pendant son utilisation.

Pour être complètement déconnecté de l’alimentation d’entrée, la prise doit être débranchée du secteur.

L’adaptateur AC/AC de l’appareil est utilisé pour déconnecter le système.

L’adaptateur AC/AC de l’appareil ne doit pas être obstrué ou doit être facilement accessible pendant son utilisation.

Pour être complètement déconnecté de l’alimentation d’entrée, l’adaptateur AC/AC de l’appareil doit être déconnecté du secteur.

2 Important Notes

FCC Information

This equipment has been tested and found to comply with the limits Class for a B

digital device, pursuant 15 of the FCC Rules. These limits designed to Part are to

provide rea sonabl e protection against harmful i nterference in re sidenti al a

installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, cause harmful may

interfe ren ce to radio communicatio ns. Ho weve r, there no gu arantee is that

interference will not occur in particular installation. this equipment does cause a If

harmful interference radio television reception, which can determined to or be by

turning the equipment off and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on circuit different from that which the a to

receiver connected.is

• Consult the dealer or an experienced radio/TV technician help. This device complies for

with Part 15 of the FCC Rules. Operation is subject the following conditions:to two

(1)

This device not cause harmful interference, andmay

(2)

This device must accept any interference received, including interference that cause may

undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void

the user's authority to operate the equipment.

Thank you for purchasing this Emerson SmartSet® Dual Alarm Clock Radio. This clock radio

uses Emerson's patented SmartSet® Automatic Time Setting System. The first time you

connect this clock radio your outlet, and after every power interruption, within to AC

seconds the clock will automatically set itself to the correct Year, Month, Date, Day, and

Time. In addition, all changes from Standard Time to Daylight Saving Time, and back to

Standard Time, are made automatically. There are dual alarms that can set and used be

independently, and both alarms can be only, programmed everyday operation, weekdays for

or weekends only. There is longlife lithium battery installed in this clock radio when you buy it. a

This battery can maintain the time and alarm settings even longer. We have for 2 years, or

taken every precaution make sure this radio in perfect working order when it left our to was

factory.

3 Preparation For Use

• Remove the radio from the carton and remove all packing material from the radio. Save the

packing material, if possible, in case the radio ever needs to be serviced or transported.

The original carton and packing material is the only safe way to pack your radio to

protect it from damage in transit.

• Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any

labels or stickers from the back or bottom of the cabinet.

• Note the serial number on the bottom of your radio and write this number in the space provided

on the Limited Warranty page of this manual.

• Place your radio on a level surface such as a table, desk or shelf, convenient to an AC outlet,

out of direct sunlight, and away from sources of excess heat, dirt, dust, moisture, humidity, or

vibration.

• Unwind the Line cord connecting the AC adapter to an AC outlet. Extend the Antenna Wire fully

and orient it to provide the best FM reception.

If you encounter any problems with the set up or operation of this item, please call the Emerson Consumer

Products Corp., Customer Service Hotline, toll free, at .1- - -9020800 898

4 Package Contents

● ER100120 ● P ower Adapter ● Owner’s Manual ● Read This Insert (Quick Start Guide)

Location of Controls and Indicators

FRONT PANEL

TOP PANEL

BACK PANEL

1. 15. RADIO / BUZZER Indicators ALARM 1 EQ Equalizer / YEAR Button

2. 16. AM Indicator ('On'=AM, 'O'=PM) S TORE / DATE Button

3. 17. AUX IN Indicator TUNE DOWN Button

4. 18. Qi Wireless Charging Indicator TUNE UP Button

5. 19. Day of Week Indicator NEXT / TIME ZONE Button

6. 20. ALARM 2 RADIO / BUZZER Indicators PREVIOUS / WEEK Button

7. 21. BT Indicator ('Solid'=Bluetooth connected) VOLUME + / ALARM 1 Button

8. 22. MHz Indicator (FM Radio Frequency) Mode / V - / ALARM 2 Button OLUME

9. 23. LOW BATTERY Indicator Backup Battery Compartment

10. 24. SLEEP Button U SB CHARGE OUT Port

11. 25. S -Level and O) Button NOOZE / DIMMER (4 DC Power IN Jack

12. 26. POWER ('ON'/Standby) Button Earphone Jack

13. 27. PLAY / PAUSE / TIME / AMS Button AUX- IN Jack

14. 28. SOURCE Button FM Antenna Wire

6 Setting the Time Zone

Initial Default Setting at Clock Mode

IMPORTANT: The first time you connect your new SmartSet® clock radio to the AC outlet the internal

computer will automatically set the time correctly for the Eastern Time Zone, which is the initial default setting.

The display will scan for a few seconds and then show the correct Day and Time in the Eastern zone. If you

live in the Eastern Time zone, there's nothing else to do. Your clock is set correctly and running. If you do not

live in the Eastern Time zone you must change the default zone display to your own zone. You only do this

one time and the SmartSet® will remember the new default zone setting and will always return to that setting

after power interruption.

There are 7 time zones programmed into your SmartSet

® clock radio as follows:

ZONE ZONE 0 Atlantic Time 1 —0 Eastern Time (Default Setting) 2 —

ZONE ZONE 0 Central Time 3 —0 Mountain Time 4 —

ZONE ZONE 0 Pacic Time 5 —0 Yukon Time 6 —

ZONE 0 Hawaiian Time 7 —

1. 2. P and hold ress TIME ZONE Press UP or DOWN

Note: Time Zone and Clock Setting can only be adjusted in Standby Mode, where the function of Radio,

Bluetooth and AUX are disabled (Indicator of MHz, BT and AUX are O).

7 Setting the Clock Manually

Date Display and Adjustments

To see the current date at any time, the DATE button. The press

display changes from time to Month and Date (MM. DD).

For example, will appear as 4. . When you release the Apr 16th ‘16’

DATE button the display returns to the current time.

To adjust the Date manually, keep holding the DATE button and press the UP or DOWN button.

Year Display and Adjustments

To see the current year, depress the YEAR button, the display

changes from time to year. When you release the YEAR button, the

display returns to the current time.

To adjust the Year manually, keep holding the YEAR button and

press the UP or DOWN button.

Manual Time Adjustments

Some people like to set their clock 5 to 10 minutes faster to make

sure that they will always be on time. Even though the SmartSet

sets the time by itself, you still have the option of adjusting the time

manually if you wish.

To manually adjust the time display and hold the TIME button, press

and press either the DOWN button to advance or reverse the time as desired.UP or

Each press of the UP DOWN button will change the display by one minute. If you hold the or UP DOWN or

button the display will continue to change. The display will change slowly at first, one minute at a time. But if

you continue holding the UP DOWN button, the display will change rapidly.or

Note: If you manually adjust the time, your new setting is entered into the SmartSet

® memory. If the power is

interrupted, the display will return to your new setting, not the original setting, when the power is restored.

Daylight Saving and Leap Year Adjustments

All Daylight Saving and Leap Year adjustments are made automatically by

the SmartSet® internal computer as follows:

Start of Daylight Saving Time:

At 2:00 AM on the 2nd Sunday in March, the clock will automatically advance to 3:00 AM.

End of Daylight Saving Time:

At 3:00 AM on the 1st Sunday in November, the clock will automatically 2:00 AM. reset to

Note: If you do not want the clock to adjust itself according to Daylight Saving time automatically, you can

disable it by pressing and holding the TIME and WEEK buttons for 1 second, then the display will show ‘dSt’ –

‘ ’ –OFF , which means the auto Daylight Saving time is disabled; by doing so again, the display will show ‘dSt’

‘ ’ON , which means the auto Daylight Saving time is enabled.

Leap Year:

At 12:00 Midnight on February 28th, the calendar display will change to . ‘2.29’

8 Setting the Alarm

Note: Alarm settings can only be checked and adjusted in Standby Mode, where the function of Radio,

Bluetooth and AUX are disabled (Indicator of MHz, BT and AUX are O).

Your SmartSet® clock radio has two separate alarms that can be set and used independently. You may use

the alarms to wake two people at dierent times, or you may use one alarm for weekdays and the other for

weekend wake up time.

Adjust the Wake Up Time

The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2.

⚫ and hold either the ALARM 1 or ALARM 2 Press

button. The display will change from the current

time to the Alarm 1 or Alarm 2 wake up time.

⚫ While holding the ALARM 1 2 button, or ALARM

press or either the UP DOWN button to advance

or reverse your desired wake up time.

⚫ When the desired wake up time appears on the

display, release the DOWN button to store UP or

the setting.

Note: Be sure that you have set the wake up time

correctly by observing the AM indicator. If the AM

indicator is 'On' the wake up time is 'AM . If the AM ’

indicator is 'O'. the wake up time is . ‘PM’

⚫ When the desired wake up time (AM or PM)

appears on the disp or ALARM lay, release the ALARM 1 2 button.

WARNING

Do not ingest the battery, Chemical Burn Hazard

This product contains a coin/button cell battery.

If the coin/button is swallowed, it can cause severe internal burns in just 2

hours and can lead to death.

Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the product

and keep it away from children.

If you think batteries might have been swallowed or placed inside any part

of the body, seek immediate medical attention.

Selecting the Alarm Week Mode

Your SmartSet® clock radio allows you to select from three dierent alarm modes for each alarm. The week

alarm week modes are:

⚫ - the alarm will turn on all 7 days Everyday

⚫ - the alarm will only turn on Monday through Friday Weekdays only

⚫ - the alarm will only turn on Saturday and Sunday Weekends only

To check the Alarm Week and hold Mode setting for Alarm 1. press the

ALARM 1 button. The display will show the Alarm 1 wake up time, and the

DAY OF WEEK indicators will show you the alarm week mode selected.

⚫ If all 7 indicators are 'On', the Everyday mode is selected.

⚫ If only the (Monday) through (Friday) indicators are 'On', the MON FRI

Weekdays only mode is selected.

⚫ If only the (Saturday) and Sunday) indicators are 'On', the SAT SUN (

Weekends only mode is selected.

To change the Alarm Week Mode setting for

Alarm 1, press and hold the ALARM 1 button

and press the WEEK button until the DAY OF

WEEK indicators show the desired : week mode

Everyday, Weekdays only, Weekends only or

operation. Release the ALARM 1 button and the

display will return to the current time.

Follow the same procedure to select the desired

Alarm Week Mode for Alarm 2 if necessary.

Checking the Wake Up Times and Alarm Week Mode

T week during standby mode, press and hold either the o check the wake up time or the alarm mode settings

ALARM 1 or ALARM 2 button. The display will change current time to wake up time and the DAY OF from

WEEK indicators will show you the alarm mode which is currently selected. Release the ALARM 1 or week

ALARM 2 button to return to the current time display.

Activating and Deactivating the Alarm

⚫ Press and release the ALARM 1 or ALARM 2 button continuously to turn On your desired Alarm Mode:

Wake to Radio, Wake to Buzzer . , or Off

⚫ When the `1♫/2♫' indicator glows, the wake up to Radio alarm will be On.

⚫ When the ‘1 / 2 indicator glows, the wake up to Buzzer alarm will be On. ’

⚫ button continuously until To completely turn Off the alarm, press and release ALARM 1 or ALARM 2

the Radio `1♫/2♫' indicator or the Buzzer ‘1 / 2 ’ indicator is O.

Snooze Alarm

When the alarm comes On, press the SNOOZE button to pause it for 9 minutes. Alarm indicator will ﬂash

during Snooze Alarm mode. To turn o Snooze Alarm, press the POWER button once.

Note: If not turned o, the Snooze Alarm will only be active for one hou r.

9 Listening to FM ioRad

Turn On / Off Radio Mode

⚫ Extend the antenna wire fully and orient it for better FM reception.

⚫ Press the POWER button to turn the unit from Standby mode to On.

⚫ the SOURCE button until the MHz indicator turns On, and the FM station frequency displays. Press

⚫ Set the VOLUME by pressing VOLUME + or VOLUME - to a level that suits your needs.

⚫ When you nish listening to radio z indicator , press the POWER button to turn the radio Off. The MH

will then go Off.

Note: Wireless charging can interfere FM reception. Please use wired USB charging while listening to radio.

Receive your desired station with the TUNING control:

⚫ the DOWN button slightly, the receiving Press UP or

frequency will incre decrease by one step ase or

⚫ Press and hold the DOWN button for one second UP or

then release, Auto Station Seeking will be engaged, the

receiving frequency will increase automatically until a

station with acceptable reception is found.

A Auto Memory Saving MS –

⚫ Turn on FM mode . as described above

⚫ Press and hold the PLAY / PAUSE (AMS) button , the for a second

display shows the FM frequency and start to scan automatically

from 87.5 .0 MHz to 108 MHz.

⚫ When FM broadcasting is detected, the station will be played for a

second or so, and the station frequency will be automatically

stored into the memory in serial sequence starting from P01, then

P02, and so forth, until the whole FM frequency range from

87.5MHz to 108 MHz has been gone through, or all the 50 .0

station memories are fully lled with the detected stations.

⚫ After the auto scanning and saving is complete, you can press the

NEXT and PREVIOUS button to explore and select the detected stations stored in the memory for

listening.

Storing and Recalling Radio Station Memory Manually

When you have a few favorite radio stations to listen to, you may like to save them specic memory in

locations, and pick one of them in a few seconds without the need of searching it each time. Our digital tuning

technology allows you to do this easily by following the steps listed below:

Storing to the Memory

⚫ Turn the unit and select Radio . On mode

⚫ Tune to the desired station by the TUNING control

as described.

⚫ the buttonPress STORE , “P XX” blinks, indicating

the memory location to store the station currently

tuned in .

⚫ the UP DOWN While “P XX” is blinking, press or

button can change the memory location from 1

through 5 example0. For , “P 03”means the current

listening station is about to stored into the 3rd be

location of the memory.

⚫ the STORE button again, the currently listening station is After deciding the memory location, press

then stored.

⚫ The display will show the frequency of the station, and after a few seconds, the current time will show.

Recalling Station from the Memory

⚫ Turn the unit On and select Radio mode.

⚫ the NEXT or PREVIOUS buttonPress , “P XX” shows on the display, and the station according to the

memory location will then tuned . be in

⚫ ing the NEXT PREVIOUS button will change the memory location from 1 through Repeatedly press or

50, and the station stored in the location will be tuned in once the memory location is selected.

⚫ The display will show the frequency of the station, and then returns to the current time.

10 Listening to Bluetooth Speaker

Turn On Bluetooth Mode

⚫ P the POWER button to turn the unit . ress On

⚫ P the SOURCE button to select Bluetooth (BT) mode, ress

BT Indicator lights up

◼ If the BT indicator lights up consistently, it means that

a device has connected with it, you can start playing

and streaming the music from your Bluetooth

connected device.

◼ If the BT indicator is ashing, there is no device is

Bluetooth connected with it yet, you can operate your

device pairing. See Paring Up procedures below. for

P with a Music Bluetooth Device (Phone, Pad, etc.) airing Up

⚫ Make sure Bluetooth is in pairing mode by observing if the

BT indicator is ashing.

⚫ If the BT indicator lights up consistently, your

Bluetooth speaker is already connected with a

device. If you wish to disconnect from the

connected device and pair up with a new one,

press and hold the PLAY/PAUSE button until the

BT indicator starts ashing, the previously

connected device is now disconnected and ready

to pair up with a new device.

⚫ Make sure your music device going to be paired is

turned on and Bluetooth enabled.

⚫ While BT indicator is ashing, nd ‘ ’ER100120

from the Bluetooth device list on your phone or

device, and select it for connection. A tone will be

heard if it is paired up and connected successfully.

⚫ Now the BT indicator lights up consistently with

the Bluetooth music device paired and connected.

Enjoy Playback with Bluetooth

After connected with a Bluetooth device, BT

indicator lights up consistently, now you can

start playback by streaming the music to the

speaker wirelessly.

⚫ Start playing f m the Bluetooth ro

device by pressing PLAY on the APP

of your music player.

⚫ While playing, if you wish pause to it,

press the PLAY / PAUSE button. To

resume playback, press it again.

⚫ To skip to the next or the previous

sound track, press the NEXT or

PREVI button. OUS

Note: PLAY/PAUSE, NEXT, PREVIOUS

control requires the connected Bluetooth device to support AVRCP Bluetooth prole, and the playback APP is

also concerned in realizing the said controls.

11 AUX IN Jack for External Music

This clock radio is equipped with AUX IN jack for you to enjoy iPod, MP3

music player or other audio source.

⚫ Connect your iPod, MP3 player or other audio source from its

earphone jack to the AUX IN jack of this unit via an audio cable (not

included) with both ends in 3.5mm stereo plug.

⚫ indicator will light on after you power on the unit and change AUX

to AUX by pressing the SOURCE button. mode

⚫ music player or other audio player, and set Start to play iPod, MP3

the player volume to its maximum when necessary.

⚫ Adjust the volume of this clock radio your desired level. to meet

12 EQ for Music Listening

Th clock radio is equipped with EQ (Equalizer) to let you enjoy is

listening stereo music in 5 dierent acoustic settings in order to to

suit dierent music or audience experience.

⚫ While listening FM, Bluetooth or AUX, press the to EQ

button select dierent EQ setting: to

◼ P - OP POPULAR

◼ - rOC ROCK

◼ JA2 - JAZZ

◼ C - LC CLASSIC

◼ F - LT FLAT

⚫ Press the EQ button once will show the current setting.

⚫ Press the EQ button repeatedly will change the EQ

setting.

13 Enjoying Stereo via Earphone Jack

⚫ Press the POWER button to turn the unit On.

⚫ Press the SOURCE button to select and listen to your desired

audio source (Bluetooth Radio , or AUX).

⚫ Adjust the output volume to relatively low volume. a

⚫ headphone plug into the 3.5mm earphone jack to Connect your

enjoy streaming stereo through your headphone.

Note: If an alarm is set and your headphone is still connected to the

unit, Wake to Radio/Buzzer alarm will go o on the speaker and your

headphone at the same time when alarm comes.

CAUTION: Prolonged use of headphone at high volume may cause

irreparable hearing loss. We strongly advise you to adjust the

headphone volume to a reasonable level. The higher the volume for a

prolonged time, the higher the risk of damaging your hearing.

14 Sleeping to Music Timer

Power on and select the desired function to listen . to

⚫ P the SLEEP button, the display will show the ress

Sleep Timer starting from 10 minutes before

shutting he unit automatically. off t

⚫ the SLEEP button repeatedlyPress , the Sleep

Timer will increase in -minute step until it 10

reaches its maximum of 90 minutes. If you press

the SLEEP button again, it will then change the

Sleep Timer to a minimum of 2 minutes.

⚫ While Sleep Timer is showing on the display,

press the UP or DOWN button will change the

Sleep Timer in 1-minute step.

⚫ Leave the Sleep Timer for a while, the current

time shows again. The unit shuts itself off

automatically to Standby mode after the Sleep

Timer nished the countdown process.

⚫ I shut the unit earlier the f you want to off , press

POWER button to cancel this Sleep Timer.

15 Wireless Charging Qi

A Qi Wireless Charging Pad that supports 5W and fast charging is

built on top of this unit for wireless power transfer to any Qi-

compatible smartphone or Qi-enabled receivers over a vertical

distance of not more than 0.2 inches (5 mm).

⚫ Place your -compatible smartphone or receiver (only one Qi

set at a time) on top of the Wireless Charging Pad. The

center of your smartphone or receiver must be positioned

properly right in the middle of this charging pad in order to

maximize its charging eciency.

⚫ While wireless charging started or detected, the Qi indicator

will light up steadily.

⚫ To make sure wireless charging performs properly, check the charging icon and/or charging message

displays on your smartphone.

⚫ When the charging icon and/or charging message displays on your smartphone showing fully charged,

remove your phone from the wireless charging pad.

⚫ While wireless charging error occurs (if metal sheet/substance placed on top of the charging pad), the

Qi indicator will be ashing rapidly to alert user to get the erroneous receiver removed.

Note:

⚫ This wireless charging pad works with Qi-compatible device including 7.5W iPhone XS Max/XS/XR/X/8

Plus/8, 10W Galaxy S10 Plus E/S10/S9, and 5W all Qi-enabled phones. /S10

⚫ Wireless charging may not work properly if the protective case or accessory placed at the back of your

smartphone is thicker than 0.2 inches (5 mm), remove the protective case or accessory before placing

your smartphone (screen facing upward) on the wireless charging pad.

⚫ Do not place any foreign objects, such as coins, keys, metallic objects, magnets, and magnetic stripe

cards, between your smartphone and the wireless charger, to avoid interference or overheating.

16 USB Charging

The Clock Radio has a USB port at the back, which can

provide up to 5V 2.1A to charge devices like

smartphone, tablet etc. via a USB cable (not provided).

Note: Electrical power drawn from the USB port may

vary due to dierent charging cable condition, battery

characteristic or power management system your of

device being charged.

17 Changing the Lithium Battery

The lithium backup battery needs replacement when the

LOW BATTERY indicator ﬂashes, otherwise, the time

and alarm settings will be lost/reset after a power

outage.

⚫ Leave the AC adapter connected to your AC

outlet to retain memory while the original battery

is removed.

⚫ Unscrew the battery holder from the cabinet with

a small screwdriver and insert a new battery with

the same CR2032 or equivalent type into the

holder the same way, observing the positive (+)

polarity before sliding the holder back into the

slot. The LOW BATTERY indicator should then

be Off.

18 Care and Maintenance

19 LIMITED WARRANTY

10 90 1402A- -

M ODEL NUMBER: ER100120

SERIAL NUMBER:

Emerson Part No.: ER100120- 13-00 Printed in China 201905

Produktspezifikationen

Marke:	Emerson
Kategorie:	Nicht kategorisiert
Modell:	ER100120

Brauchst du Hilfe?

Wenn Sie Hilfe mit Emerson ER100120 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten

Ihren Namen*

Deine E-Mail*

Schreiben Sie hier Ihre Frage

Bedienungsanleitung Nicht kategorisiert Emerson

Emerson SmartSet CKSW5010 Bedienungsanleitung

5 September 2024

Emerson SmartSet CKS8888 Bedienungsanleitung

5 September 2024

Emerson Sensi RS01-SG Bedienungsanleitung

4 September 2024

Emerson CK2023 Bedienungsanleitung

3 September 2024

Emerson CKS1401 Bedienungsanleitung

3 September 2024

Emerson MWG1191SB Bedienungsanleitung

3 September 2024

Emerson WBS12 Bedienungsanleitung

1 September 2024

Emerson CR175B Bedienungsanleitung

27 August 2024

Emerson FK609 Bedienungsanleitung

27 August 2024

Emerson PD5802 Bedienungsanleitung

27 August 2024

Bedienungsanleitung Nicht kategorisiert

Neueste Bedienungsanleitung für -Kategorien-

DAS Audio AX-112-5 Bedienungsanleitung

16 Oktober 2024

Ferplast Ergocomfort Freetime Bedienungsanleitung

16 Oktober 2024

AEG MECK52 Bedienungsanleitung

16 Oktober 2024

Makita UR012G Bedienungsanleitung

16 Oktober 2024

Stihl HT 70 Bedienungsanleitung

16 Oktober 2024

Ernesto H14270 Bedienungsanleitung

16 Oktober 2024

IFM AC901S Bedienungsanleitung

16 Oktober 2024

Nedis RFPOM120FBK Bedienungsanleitung

16 Oktober 2024

AEG E9KLCS01 Bedienungsanleitung

16 Oktober 2024

ART ProChannel II Bedienungsanleitung

16 Oktober 2024