Elite Screens Tripod T71NWS1 Bedienungsanleitung

Elite Screens Projektionsleinwand Tripod T71NWS1

Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Elite Screens Tripod T71NWS1 (3 Seiten) in der Kategorie Projektionsleinwand. Dieser Bedienungsanleitung war für 13 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Download PDF

Seite 1/3

Rev. 0 17 DR511 0 www.elitescreens.com

Tripod Portable Projection Screen

Tripod Series / Tripod Pro Series

USER’S GUIDE

Tripod Screen Parts Identification

Using the Screen

A. : Setting up the screen

Follow the steps below and Fig. 1 & 2.

1. Place the screen in an upright position (fig.1) with the legs toward the ground.

2. Deploy the Tripod Support legs by pushing down on the Tripod Junction.

Top Hook, Keystone

Eliminator & Screen Handle

Vertical locking sleeve ring

Support beam

Vertical

Extension Bar

Screen Material

Screen case

Carrying handle & Screen height

adjustment lock/release tab

Tripod junction

Tripod Support Legs

End cap

Rev. 0 17 DR511 1 www.elitescreens.com

3. Turn the tripod’s screen -degree horizontal position casing in a 90 so that the screen casing is now

parallel to the ground with the screen handle facing the bottom of the top hook.

4. Completely extend the they are stable legs as much as possible so and position them away from

objects that may interfere with their balance. DO NOT stand the tripod on an unstable platform to avoid

an injury should the tripod screen collapse.

B. n:Preparing the tripod screen for projectio

Follow the steps below and Fig. 3.

1. Pull the screen handle up vertically and hook the screen handle on . the Top Hook

*Note: Use the Keystone Eliminator to prevent “Keystone Effect” from occurring. Keystone Effect is

caused when a projector presents its image at a downward angle causing a trapezoid-shaped image to

appear on the screen. The Keystone Eliminator is designed to eliminate that effect by sloping the screen

forward.

2. Twist the Vertical Locking Sleeve Ring -counter

clockwise Vertical to unlock the current position of the

Extension Bar and raise it as necessary to the desired

height .

3. Pull the Screen ock/Height Adjustment L Release tab

out (to the left) located just above the Carrying Handle

to raise or lower the bottom of the. Once the desired

height has been set, push the tab in to lock the position in

place.

Fig. 2

Fig.1

Fig. 3

Rev. 0 17 DR511 2 www.elitescreens.com

C. Disassembling the screen:

Follow the steps below and Fig. 4.

1. Unlock the Adjustment Handle by pulling the locking tab to the and slowly sl left ide the handle all

the way down to bring down the position of the screen’s case.

2. Hold the Extension Bar and twist the Vertical Locking Sleeve -Ring counter clockwise to unlock

and release the position of the extension bar. Once the extension bar has been brought all the way down,

unhook the screen material from the Top Hook and slowly retract the screen back into the case.

* : Note It is very important to remember to hold the extension and then unlock bar first the sleeve to

prevent the extension bar from slamming and damaging the screen.

3. Turn the screen’s case andvertically clockwise bottom pin to lock into insert the Top Hook’s the

screen’s end cap hole.

4. Close the tripod legs by pushing them in. Lastly, tighten the Vertical Locking Sleeve Ring by

t . wisting it clockwise

Fig. 4

Note:

o To ensure the screen is stable, extend the tripod’s legs as much as possible.

o Do not fold the screen or allow any sharp objects to touch the screen’s surface.

o Clean the screen surface often when needed.

o Careful use will extend the lifetime of this product.

For more information, technical support or your local Elite Screens contact,

please visit www.elitescreens.com

Produktspezifikationen

Marke:	Elite Screens
Kategorie:	Projektionsleinwand
Modell:	Tripod T71NWS1
Breite:	1432 mm
Tiefe:	70 mm
Gewicht:	5400 g
Höhe:	2435 mm
Warentarifnummer (HS):	90106000
Natives Seitenverhältnis:	1:1
Gehäusefarbe:	Weiß
Rahmentyp:	Klapprahmen
Einsehbare Bildschirmhöhe (H):	1275 mm
Einsehbare Bildschirmbreite (B):	1275 mm
Diagonal:	71 "
Antriebstyp:	Manuell
Leuchtdichtefaktor:	1.1
Grenzen:	38 mm