Elektrobock CV701 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für Elektrobock CV701 (4 Seiten) in der Kategorie Luftbefeuchter. Dieser Bedienungsanleitung war für 11 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/4
SENSOR
HUMIDITY
When the set relative humidity (RH) is reached, the
connected device (fan, hood, signaling equipment, etc.).
C
C
C
CV701
V701
V701
V701
CV701
Pb
LEAD FREE
in acco rdanc e
with RoHS
MADE IN CZECH REPUBLIC
MAX.
15-200 W
RH
20-95 %
CV701 is an ideal solution for places where there is a high risk of mold (on
masonry, windows, tiles).
The main function of the CV701 is to control the fan (ventilation) with respect to
the size of the relative humidity (RH) in the room (RH is the percentage of water
vapor content in air at a given temperature compared to air vapor fully saturated at
the same temperature). High RH can cause condensation of water vapor and thus
the formation of mold. Molds not only damage property, but can also seriously
endanger human health (allergies, asthma).
DESCRIPTION
CONSTRUCTION
Remove the terminal cover (Fig.1). Connect the 230V / 50Hz power
supply to the and terminals (the rst two from the right). Connect N L
the device we want to switch to the terminals marked and N, eg the OUT
fan (diagram no. 1). The terminal marked number 1 does not have to be
connected, it is used for connection of external control (diagram no. 2).
After connecting the wires, return the terminal box cover and attach the
CV701 to the installation box.
We always change the fuse for the same type F2A / 1500A, 250V.
Only a person may install and replace the fuse (without voltage)
with the appropriate qualications.
NOTICE
The humidity sensor must be installed at least 1 m from the fan! Select
a location where the sensor will not be aected by direct warm airow
from the heater, sunlight, or other disturbances.
scheme no.1 scheme no.2
230 V/50 Hz 230 V/50 HzL
SETTINGS
At the required humidity (ie whenever we want it to occur
to switch on the connected device) turn the control element (Fig.2)
counterclockwise until the red LED lights up and the connected device
is switched on.
When the set RH value is exceeded, CV701 starts automatically regulate
room ventilation. If the humidity does not reach the set value, the CV701
is inoperative.
When connected with an external switch (diagram no. 2), it is possible to
manually regulate the ventilation regardless of the humidity in the room.
Fig.1 Fig.2
screw
(to remove the cover)
control element
(RH setting)
terminal blocks
(for connecting wires)
red LED
(indication of switching)
position 1
corresponds to
20% RH
(indicative value)
position 10
corresponds to 95%
RH
(indicative value)


Produktspezifikationen

Marke: Elektrobock
Kategorie: Luftbefeuchter
Modell: CV701

Brauchst du Hilfe?

Wenn Sie Hilfe mit Elektrobock CV701 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Luftbefeuchter Elektrobock

Bedienungsanleitung Luftbefeuchter

Neueste Bedienungsanleitung für -Kategorien-