ELAC AirX2 Bedienungsanleitung


Lesen Sie kostenlos die 📖 deutsche Bedienungsanleitung für ELAC AirX2 (25 Seiten) in der Kategorie Netzwerkkarte / Adapter. Dieser Bedienungsanleitung war für 12 Personen hilfreich und wurde von 2 Benutzern mit durchschnittlich 4.5 Sternen bewertet

Seite 1/25
AirX2 Wireless Transmitter
OPERATING INSTRUCTIONS
ELAC AirX Transmitter | www.elac.com | Page 1
Important Safety Instructions
1. General information
Please read and follow these safety instructions.
Keep them safe for future reference.
Observe all warnings on the unit and in the manual.
Please check the speaker for damage before use.
The unit must be in perfect working condition.
Damaged parts may lead to personal injury.
2. Use only as directed
Connect the unit according to the instructions in
the manual.
3. Location
Install the unit on a level surface only
When choosing the location for this device do not
place them in locations that are:
In direct sunlight
Very humid
Prone to vibrations
Exceptionally hot or cold
Do not block any ventilation openings. Install in accordance
with the manufacturer’s instructions.
Do not install this device in a closed rack or in a
closed cupboard.
Do not put burning candles on or near the device.
Do not install the device near transformers
because electromagnetic stray fields can cause
hum noise on woofers.
4. Service
DANGER! Do not open the cabinet because the components
and conductors may carry dangerous levels electricity! Ser-
vicing to be carried out by qualified service personnel only.
Servicing is required when the loudspeaker has been dam-
aged in any way, such as damage to the power supply cord
or the plug, or when liquid has been spilled or objects have
fallen into the loudspeaker, the speaker has been exposed
to rain or moisture, does not operate normally, or has been
dropped. To reduce the risk of electric shock, do not open the
loudspeaker. Servicing to be carried out by qualified service
personnel only.
ELAC AirX Transmitter | www.elac.com | Page 2
5. Cleaning
NOTE: Clean only with soft, smooth cloth or with dust brush.
Do not use scouring agents, alcohol, benzene, furniture
polish or other agents for cleaning! Modern furniture is often
coated with multiple varnishes and plastics which can be
treated with chemical agents. Some of these agents contain
substances which degrade or soften the rubber feet.
6. Disposal
The packaging is made from recyclable materials. Dispose of
this in an environmentally friendly manner. At end of life do
not dispose the speaker with the standard household waste.
The speaker must be recycled in accordance with local
legislation. Ask your local government for further information
on recycling as the device contains valuable raw materials.
Disable the speaker before disposal.
7. Power
This unit is only intended to be connected to voltages that
are listed on the rear panel of the cabinet. Connection to any
other voltage may cause irreversible damage to the subwoof-
er and will void the warranty. Use of plug adapters is not rec-
ommended because they may allow connection to voltages
other than those printed on the back of this subwoofer.
8. Compliance Information for the Wireless Transmitter
The term “IC:” before the radio certification number only
signifies that Industry Canada technical specifications were
met. This equipment complies with FCC and IC radiation ex-
posure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum
distance 20cm between the radiator and your body. This
transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
Operation is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device must
accept any interference, including interference that may
cause undesired operation of the device.
To reduce potential radio interference to other users, the
antenna type and its gain should be so chosen that the
equivalent isotopically radiated power is not more than that
permitted for successful communication.


Produktspezifikationen

Marke: ELAC
Kategorie: Netzwerkkarte / Adapter
Modell: AirX2
Breite: 88 mm
Tiefe: 88 mm
Mitgelieferte Kabel: AC
Produktfarbe: Schwarz
Höhe: 279 mm
Kompatible Produkte: Navis ARB-51, Navis ARF-51, SUB3070, SUB2010, and SUB2020
Hostschnittstelle: AUX, USB
Transmissionsdistanz: 7.62 m

Brauchst du Hilfe?

Wenn Sie Hilfe mit ELAC AirX2 benötigen, stellen Sie unten eine Frage und andere Benutzer werden Ihnen antworten




Bedienungsanleitung Netzwerkkarte / Adapter ELAC

Bedienungsanleitung Netzwerkkarte / Adapter

Neueste Bedienungsanleitung für -Kategorien-